[PATCH v4 0/2] leds: Add a driver for KTD202x

[André Apitzsch]

Add the binding description and the corresponding driver for
the Kinetic KTD2026 and KTD2027.

Signed-off-by: André Apitzsch <git@xxxxxxxxxxx>
---
Changes in v4:
- Annotate struct ktd202x with __counted_by
- Link to v3: https://lore.kernel.org/r/20230906-ktd202x-v3-0-7fcb91c65d3a@xxxxxxxxxxx

Changes in v3:
- Add r-b to bindings patch
- Replace .probe_new by .probe
- Link to v2: https://lore.kernel.org/r/20230901-ktd202x-v2-0-3cb8b0ca02ed@xxxxxxxxxxx

Changes in v2:
- Make binding description filename match compatible
- Address comments by Lee Jones
  - Extend driver description in Kconfig
  - Add copyright + link to datasheet
  - Add unit to definition/variable names, where needed
  - Define magic numbers
  - Remove forward declaration of 'struct ktd202x'
  - Remove superfluous comments
  - Get rid of struct ktd202x_info
  - Join ktd202x_chip_init() with ktd202x_chip_enable()
  - Return the error on ktd202x_chip_disable()
  - Remove unreachable case from chip_in_use()
  - Rename ktd202x_brightness_set() argument from num_colors to num_channels
  - Forward errors received in ktd202x_brightness_set()
  - Remove variable for 'num_channels = 1'
  - Add some explanations to blink time calculation
  - Remove unneeded lcdev from ktd202x_blink_*_set()
  - Add define for max brightness and replace deprecated LED_FULL by it
  - Move setting led_classdev.brightness to ktd202x_brightness_*_set()
  - Move mutex_lock inside ktd202x_blink_set()
  - Add comment that 'color' property is optional (allow EINVAL)
  - Replace escaped double quotes by single quotes
  - Avoid overloading variable 'color'
  - Do not lock during probe
  - Remove usage of 'of_match_ptr'
- Document interrupt and pull-up supply, like done for aw2013[1]
- Fix error in num_steps calculation
- Link to v1: https://lore.kernel.org/r/20230618-ktd202x-v1-0-fc182fefadd7@xxxxxxxxxxx

[1] https://lore.kernel.org/linux-leds/20230815-aw2013-vio-v3-0-2505296b0856@xxxxxxxxxxx/

---
André Apitzsch (2):
      dt-bindings: leds: Add Kinetic KTD2026/2027 LED
      leds: add ktd202x driver

 .../devicetree/bindings/leds/kinetic,ktd202x.yaml  | 171 ++++++
 drivers/leds/rgb/Kconfig                           |  13 +
 drivers/leds/rgb/Makefile                          |   1 +
 drivers/leds/rgb/leds-ktd202x.c                    | 625 +++++++++++++++++++++
 4 files changed, 810 insertions(+)
---
base-commit: 9641a13970d832d821ad304e187b80dbe70bae30
change-id: 20230618-ktd202x-546b2a7d240b

Best regards,
-- 
André Apitzsch <git@xxxxxxxxxxx>