[PATCH v2 0/7] arm64: dts: imx8qxp add emda support

[Frank Li]

eDMAv3 patch was accepted.
https://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine.git/log/?h=next

This is dts parts.

Add 8qxp edma support and enable lpuart1..3 dma support.

Change from v1 to v2
- rebase scu-pd.c to 6.6rc1
- change "F" to "f"
- Add 8qm edma dts change.
- Add lpuart0 dma setting (console tty will disable dma)

Frank Li (7):
  genpd: imx: scu-pd: fixed dma2-ch domain defination
  arm64: dts: imx8: add edma[0..3]
  arm64: dts: imx8: add edma for uart[0..3]
  arm64: dts: imx8qm: Update edma channel for uart[0..3]
  arm64: dts: imx8: update lpuart[0..3] irq number
  arm64: dts: imx8qxp-mek: enable 8qxp lpuart2 and lpuart3
  arm64: dts: imx8qm-mek: enable 8qm lpuart2 and lpuart3

 .../boot/dts/freescale/imx8-ss-audio.dtsi     | 88 +++++++++++++++++++
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 78 +++++++++++++++-
 .../boot/dts/freescale/imx8dxl-ss-adma.dtsi   | 30 +++++++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 26 ++++++
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     | 56 ++++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 26 ++++++
 drivers/genpd/imx/scu-pd.c                    |  3 +-
 7 files changed, 302 insertions(+), 5 deletions(-)

-- 
2.34.1