Re: [PATCH v5 0/7] Add support for LUT PPG

[Luca Weiss]

On Fri Sep 29, 2023 at 2:38 AM CEST, Anjelique Melendez wrote:
> In certain PMICs, LUT pattern and LPG configuration is stored in SDAM
> modules instead of LUT peripheral. This feature is called PPG.
>
> This change series adds support for PPG. Thanks!
>
> Changes since v4:
>   - Patch 3/7
>     - Get rid of r/w helpers
>     - Use regmap_read_poll_timeout() in qcom_pbs_wait_for_ack()
>     - Update error path in qcom_pbs_trigger_event()
>     - Fix reverse christmas tree
>   - Patch 4/7
>     - Get rid of r/w helpers
>     - Update variables to use "sdam" instead of "nvmem"
>     - Fix comments
>     - Fix reverse christmas tree
>     - Update lpg_pattern_set() logic
>   - Patch 5/7
>     - Removed sdam_lut_base from lpg_data
> Changes since v3:
>   - Patch 4/7
>     - Fix function returns
>     - Move register definition to top of file
>     - Revert max_brightness and probe accidental changes
>     - Combine init_sdam() and parse_sdam()
>     - Change error prints in probe to use dev_err_probe
>     - Remove ppg_en variable
>     - Update when pbs triggers are set/cleared
>   - Patch 6/7
>     - Remove use of nvmem_count
>     - Move register definition to top of file
>     - Remove lpg_get_sdam_lut_idx()
> Changes since v2:
>   - Patch 1/7
>     - Fix dt_binding_check error
>     - Rename binding file to match compatible
>     - Iclude SoC specific comptaibles
>   - Patch 2/7
>     - Update nvmem-names list
>   - Patch 3/7
>     - Update EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
>     - Fix return/break logic in qcom_pbs_wait_for_ack()
>     - Update iterators to be int
>     - Add constants
>     - Fix function calls in qcom_pbs_trigger_event()
>     - Remove unnessary comments
>     - Return -EPROBE_DEFER from get_pbs_client_device()
> Changes since v1:
>   - Patch 1/7
>     - Fix dt_binding_check errors
>     - Update binding description
>   - Path 2/7
>     - Fix dt_binding_check errors
>     - Update per variant constraints
>     - Update nvmem description
>   - Patch 3/7
>     - Update get_pbs_client_device()
>     - Drop use of printk
>     - Remove unused function
>
> Tested-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx> # sdm632-fairphone-fp3 (pmi632)

Hi Anjelique,

Actually I've retested this now on PMI632 (and also realized that my
previous tests weren't correct and wasn't actually using hw_pattern).

Using the following commands (after boot) I'm expecting to get a
500ms on 500ms off blinking pattern between white (255 255 255) and off
(0 0 0).

  echo pattern > /sys/class/leds/rgb:status/trigger
  echo -1 > /sys/class/leds/rgb:status/repeat

  echo "255 255 255" > /sys/class/leds/rgb:status/multi_intensity
  echo "255 500 255 0 0 500 0 0" > /sys/class/leds/rgb:status/hw_pattern

What I actually see is it blinking between cyan (0 255 255) and red (255
0 0).
At some point after playing with many patterns I got it to actually
cycle between white and off, but I couldn't reproduce this again (or I
didn't try hard enough).


But with this example it correctly blinks red on-off.

  echo "255 0 0" > /sys/class/leds/rgb:status/multi_intensity
  echo "255 500 255 0 0 500 0 0" > /sys/class/leds/rgb:status/hw_pattern

With "0 255 0" and "0 0 255" the other colors also work fine, it's just
the combinations that seem somewhat broken.

Regards
Luca


>
> Anjelique Melendez (7):
>   dt-bindings: soc: qcom: Add qcom,pbs bindings
>   dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
>   soc: qcom: add QCOM PBS driver
>   leds: rgb: leds-qcom-lpg: Add support for single SDAM PPG
>   leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
>   leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT
>     SDAM
>   leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
>
>  .../bindings/leds/leds-qcom-lpg.yaml          |  89 ++++-
>  .../bindings/soc/qcom/qcom,pbs.yaml           |  46 +++
>  drivers/leds/rgb/leds-qcom-lpg.c              | 359 ++++++++++++++++--
>  drivers/soc/qcom/Kconfig                      |   9 +
>  drivers/soc/qcom/Makefile                     |   1 +
>  drivers/soc/qcom/qcom-pbs.c                   | 243 ++++++++++++
>  include/linux/soc/qcom/qcom-pbs.h             |  30 ++
>  7 files changed, 749 insertions(+), 28 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,pbs.yaml
>  create mode 100644 drivers/soc/qcom/qcom-pbs.c
>  create mode 100644 include/linux/soc/qcom/qcom-pbs.h