Re: [regression] Resume broken on T14s Gen1 (AMD) due to "Input: psmouse - add delay when deactivating for SMBus mode"

[Jeffery Miller]

Hello,

On Sat, Sep 30, 2023 at 4:04 AM Thorsten Leemhuis <linux@xxxxxxxxxxxxx> wrote:
>
> [FWIW, in case sending this in private happened accidentally, feel free
> to make this public again.]

This was unintentional. Replying back to the list.

> """
> > diff --git a/drivers/input/mouse/psmouse-smbus.c b/drivers/input/mouse/psmouse-smbus.c
> > index 7b13de979908..fe12385bb856 100644
> > --- a/drivers/input/mouse/psmouse-smbus.c
> > +++ b/drivers/input/mouse/psmouse-smbus.c
> > @@ -121,11 +121,11 @@ static psmouse_ret_t psmouse_smbus_process_byte(struct psmouse *psmouse)
> >
> >  static void psmouse_activate_smbus_mode(struct psmouse_smbus_dev *smbdev)
> >  {
> > -       if (smbdev->need_deactivate) {
> > -               psmouse_deactivate(smbdev->psmouse);
> > -               /* Give the device time to switch into SMBus mode */
> > -               msleep(30);
> > -       }
> > +        if (smbdev->psmouse == NULL) {
> > +           printk("XXX: smbdev->psmouse is null\n");
> > +        } else {
> > +           printk("XXX: smbdev->psmouse is set\n");
> > +        }
> >  }
> >
> >  static int psmouse_smbus_reconnect(struct psmouse *psmouse)
> """
>
> During boot this prints "XXX: smbdev->psmouse is set". But it helped, as
> the machine now resumes from s2idle again -- while printing "XXX:
> smbdev->psmouse is null". And that should not be the case I assume. Or
> did my brute force test go sideways due to my limited skills?

This was a good test. You've identified where it is crashing.

Maybe we could confirm that `psmouse->private` is not-NULL?:
```
diff --git a/drivers/input/mouse/psmouse-smbus.c
b/drivers/input/mouse/psmouse-smbus.c
index 7b13de979908..432615df9ae8 100644
--- a/drivers/input/mouse/psmouse-smbus.c
+++ b/drivers/input/mouse/psmouse-smbus.c
@@ -130,7 +130,10 @@ static void psmouse_activate_smbus_mode(struct
psmouse_smbus_dev *smbdev)

 static int psmouse_smbus_reconnect(struct psmouse *psmouse)
 {
-       psmouse_activate_smbus_mode(psmouse->private);
+       if (psmouse->private == NULL) {
+               printk("XXX smbdev is null");
+       }
+       //psmouse_activate_smbus_mode(psmouse->private);
        return 0;
 }
```

Thanks,
Jeff

On Thu, Sep 28, 2023 at 4:08 AM Thorsten Leemhuis <linux@xxxxxxxxxxxxx> wrote:
>
> On 27.09.23 19:23, Thorsten Leemhuis wrote:
> > On 27.09.23 17:55, Jeffery Miller wrote:
> >> On Wed, Sep 27, 2023 at 10:43 AM Jeffery Miller
> >> <jefferymiller@xxxxxxxxxx> wrote:
> >>> On Wed, Sep 27, 2023 at 3:54 AM Thorsten Leemhuis <linux@xxxxxxxxxxxxx> wrote:
> >>>>
> >>>> My dmesg from a kernel with the revert:
> >>>> https://www.leemhuis.info/files/misc/dmesg
> >
> > Thx for looking into this!
> >
> >>> In this dmesg output it shows that this is an elantech smbus device:
> >>> ```
> >>> [    4.260415] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x7f3001)
> >>> [    4.279297] psmouse serio1: elantech: Synaptics capabilities query result 0x90, 0x18, 0x0f.
> >>> [    4.292788] psmouse serio1: elantech: Elan sample query result 00, 80, c9
> >>> [    4.319184] psmouse serio1: elantech: Elan ic body: 0x10, current fw version: 0x3
> >>> ...
> >>> [    4.346951] psmouse serio1: elantech: Trying to set up SMBus access
> >>> [    4.346986] psmouse serio1: elantech: SMbus companion is not ready yet
> >>> [    4.369993] input: ETPS/2 Elantech TrackPoint as /devices/platform/i8042/serio1/input/input7
> >>> [    4.376200] systemd[1]: bpf-lsm: LSM BPF program attached
> >>> [    4.385192] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
> >>> ```
> >>> The change in 92e24e0e57f72e shouldn't affect the elantouch device as  elantech_setup_smbus
> >>> initializes `psmouse_smbus_init` with need_deactivate = false.
> >
> > Hmmm. Wondering if I should warm up the compiler again to recheck my
> > result one more time[1].
>
> Just did that. Ran "make clean" and compiled mainline as of now
> (633b47cb009d) and the machine does never resume from s2idle; then I
> reverted 92e24e0e57f7 and compiled again (for completeness: without
> running "make clean" beforehand) and with that kernel s2idle resume
> works perfectly fine.
>
> Wondering if I or the compiler is doing something stupid here -- or if
> we missed some small but important detail somewhere.
>
> Ciao, Thorsten
>
> >>> Did you store dmesg logs from boot without the applied patch?
> >> I intended to ask if you have logs from a boot without 92e24e0e57f72e reverted.
> >
> > https://www.leemhuis.info/files/misc/dmesg-6.6-rc3-vanilla
> >
> >>> If the delay was being applied the timestamps should show the 30ms delay between
> >>> `psmouse serio1: elantech: Trying to set up SMBus access`
> >>> and
> >>> `psmouse serio1: elantech: SMbus companion is not ready yet`
> >
> > Unless I missed something there is not difference. :-/
> >
> > Ciao, Thorsten
> >
> > [1] FWIW, this is my bisect log
> >
> > """
> >> git bisect start
> >> # status: waiting for both good and bad commits
> >> # bad: [6465e260f48790807eef06b583b38ca9789b6072] Linux 6.6-rc3
> >> git bisect bad 6465e260f48790807eef06b583b38ca9789b6072
> >> # status: waiting for good commit(s), bad commit known
> >> # good: [2dde18cd1d8fac735875f2e4987f11817cc0bc2c] Linux 6.5
> >> git bisect good 2dde18cd1d8fac735875f2e4987f11817cc0bc2c
> >> # good: [4fb0dacb78c6a041bbd38ddd998df806af5c2c69] Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
> >> git bisect good 4fb0dacb78c6a041bbd38ddd998df806af5c2c69
> >> # good: [307d59039fb26212a84a9aa6a134a7d2bdea34ca] Merge tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> >> git bisect good 307d59039fb26212a84a9aa6a134a7d2bdea34ca
> >> # bad: [4a0fc73da97efd23a383ca839e6fe86410268f6b] Merge tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
> >> git bisect bad 4a0fc73da97efd23a383ca839e6fe86410268f6b
> >> # good: [e4f1b8202fb59c56a3de7642d50326923670513f] Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
> >> git bisect good e4f1b8202fb59c56a3de7642d50326923670513f
> >> # good: [5eea5820c7340d39e56e169e1b87199391105f6b] Merge tag 'mm-stable-2023-09-04-14-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
> >> git bisect good 5eea5820c7340d39e56e169e1b87199391105f6b
> >> # good: [65d6e954e37872fd9afb5ef3fc0481bb3c2f20f4] Merge tag 'gfs2-v6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
> >> git bisect good 65d6e954e37872fd9afb5ef3fc0481bb3c2f20f4
> >> # bad: [744a759492b5c57ff24a6e8aabe47b17ad8ee964] Merge tag 'input-for-v6.6-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
> >> git bisect bad 744a759492b5c57ff24a6e8aabe47b17ad8ee964
> >> # good: [dbce1a7d5dce7318d8465b1e0d052ef1d2202237] Input: Explicitly include correct DT includes
> >> git bisect good dbce1a7d5dce7318d8465b1e0d052ef1d2202237
> >> # good: [29057cc5bddc785ea0a11534d7ad2546fa0872d3] Merge tag 'linux-watchdog-6.6-rc1' of git://www.linux-watchdog.org/linux-watchdog
> >> git bisect good 29057cc5bddc785ea0a11534d7ad2546fa0872d3
> >> # bad: [3e4bb047b23375a34dbf5885709ac3729d9cfb22] Input: qt2160 - convert to use devm_* api
> >> git bisect bad 3e4bb047b23375a34dbf5885709ac3729d9cfb22
> >> # good: [e175eae16c1bf92062f1f431a95f476a61a77c48] Input: mcs-touchkey - convert to use devm_* api
> >> git bisect good e175eae16c1bf92062f1f431a95f476a61a77c48
> >> # bad: [92e24e0e57f72e06c2df87116557331fd2d4dda2] Input: psmouse - add delay when deactivating for SMBus mode
> >> git bisect bad 92e24e0e57f72e06c2df87116557331fd2d4dda2
> >> # good: [8362bf82fb5441613aac7c6c9dbb6b83def6ad3b] Input: mcs-touchkey - fix uninitialized use of error in mcs_touchkey_probe()
> >> git bisect good 8362bf82fb5441613aac7c6c9dbb6b83def6ad3b
> >> # first bad commit: [92e24e0e57f72e06c2df87116557331fd2d4dda2] Input: psmouse - add delay when deactivating for SMBus mode
> > """
> >
> >