[PATCH v2 4/5] dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup

[Köry Maincent]

From: Kory Maincent <kory.maincent@xxxxxxxxxxx>

The Linked list element and pointer are not stored in the same memory as
the HDMA controller register. If the doorbell register is toggled before
the full write of the linked list a race condition error can appears.
In remote setup we can only use a readl to the memory to assured the full
write has occurred.

Fixes: e74c39573d35 ("dmaengine: dw-edma: Add support for native HDMA")
Signed-off-by: Kory Maincent <kory.maincent@xxxxxxxxxxx>
---

Changes in v2:
- Move the sync read in a function.
- Add commments
---
 drivers/dma/dw-edma/dw-hdma-v0-core.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/dma/dw-edma/dw-hdma-v0-core.c b/drivers/dma/dw-edma/dw-hdma-v0-core.c
index 0cce1880cfdc..9109dd6c2e76 100644
--- a/drivers/dma/dw-edma/dw-hdma-v0-core.c
+++ b/drivers/dma/dw-edma/dw-hdma-v0-core.c
@@ -221,6 +221,20 @@ static void dw_hdma_v0_core_write_chunk(struct dw_edma_chunk *chunk)
 	dw_hdma_v0_write_ll_link(chunk, i, control, chunk->ll_region.paddr);
 }
 
+static void dw_hdma_v0_sync_ll_data(struct dw_edma_chunk *chunk)
+{
+	/*
+	 * In case of remote HDMA engine setup, the DW PCIe RP/EP internals
+	 * configuration registers and Application memory are normally accessed
+	 * over different buses. Ensure LL-data reaches the memory before the
+	 * doorbell register is toggled by issuing the dummy-read from the remote
+	 * LL memory in a hope that the posted MRd TLP will return only after the
+	 * last MWr TLP is completed
+	 */
+	if (!(chunk->chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL))
+		readl(chunk->ll_region.vaddr.io);
+}
+
 static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
 {
 	struct dw_edma_chan *chan = chunk->chan;
@@ -251,6 +265,9 @@ static void dw_hdma_v0_core_start(struct dw_edma_chunk *chunk, bool first)
 	/* Set consumer cycle */
 	SET_CH_32(dw, chan->dir, chan->id, cycle_sync,
 		  HDMA_V0_CONSUMER_CYCLE_STAT | HDMA_V0_CONSUMER_CYCLE_BIT);
+
+	dw_hdma_v0_sync_ll_data(chunk);
+
 	/* Doorbell */
 	SET_CH_32(dw, chan->dir, chan->id, doorbell, HDMA_V0_DOORBELL_START);
 }
-- 
2.25.1