Re: linux-next: build failure after merge of the usb tree
From: Greg KH
Date: Wed Oct 04 2023 - 02:43:27 EST
On Wed, Oct 04, 2023 at 01:22:47PM +1100, Stephen Rothwell wrote:
> Hi all,
>
> After merging the usb tree, today's linux-next build (x86_64 allmodconfig)
> failed like this:
>
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:156:43: error: 'QPHY_V6_PCS_SW_RESET' undeclared here (not in a function); did you mean 'QPHY_V2_PCS_SW_RESET'?
> 156 | [QPHY_SW_RESET] = QPHY_V6_PCS_SW_RESET,
> | ^~~~~~~~~~~~~~~~~~~~
> | QPHY_V2_PCS_SW_RESET
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:157:43: error: 'QPHY_V6_PCS_START_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_START_CONTROL'?
> 157 | [QPHY_START_CTRL] = QPHY_V6_PCS_START_CONTROL,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~
> | QPHY_V3_PCS_START_CONTROL
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:158:43: error: 'QPHY_V6_PCS_PCS_STATUS1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_PCS_STATUS1'?
> 158 | [QPHY_PCS_STATUS] = QPHY_V6_PCS_PCS_STATUS1,
> | ^~~~~~~~~~~~~~~~~~~~~~~
> | QPHY_V5_PCS_PCS_STATUS1
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:159:43: error: 'QPHY_V6_PCS_POWER_DOWN_CONTROL' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_POWER_DOWN_CONTROL'?
> 159 | [QPHY_PCS_POWER_DOWN_CONTROL] = QPHY_V6_PCS_POWER_DOWN_CONTROL,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> | QPHY_V3_PCS_POWER_DOWN_CONTROL
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:162:43: error: 'QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL'?
> 162 | [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = QPHY_V6_PCS_USB3_AUTONOMOUS_MODE_CTRL,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> | QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:163:44: error: 'QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR'?
> 163 | [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V6_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> | QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:991:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG1'?
> 991 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG1, 0xc4),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:992:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_LOCK_DETECT_CONFIG2'?
> 992 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG2, 0x89),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:993:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG3' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG3'?
> 993 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG3, 0x20),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:994:26: error: 'QPHY_V6_PCS_LOCK_DETECT_CONFIG6' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_LOCK_DETECT_CONFIG6'?
> 994 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_LOCK_DETECT_CONFIG6, 0x13),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:997:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L'?
> 997 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:998:26: error: 'QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H' undeclared here (not in a function); did you mean 'QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H'?
> 998 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:999:26: error: 'QPHY_V6_PCS_CDR_RESET_TIME' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_CDR_RESET_TIME'?
> 999 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_CDR_RESET_TIME, 0x0a),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1000:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG1'?
> 1000 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG1, 0x88),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1001:26: error: 'QPHY_V6_PCS_ALIGN_DETECT_CONFIG2' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_ALIGN_DETECT_CONFIG2'?
> 1001 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_ALIGN_DETECT_CONFIG2, 0x13),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1003:26: error: 'QPHY_V6_PCS_EQ_CONFIG1' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG1'?
> 1003 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG1, 0x4b),
> | ^~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1004:26: error: 'QPHY_V6_PCS_EQ_CONFIG5' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_EQ_CONFIG5'?
> 1004 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_EQ_CONFIG5, 0x10),
> | ^~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1008:26: error: 'QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL'?
> 1008 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1009:26: error: 'QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2'?
> 1009 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1010:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L' undeclared here (not in a function); did you mean 'QPHY_V4_PCS_USB3_RCVR_DTCT_DLY_U3_L'?
> 1010 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_L, 0x40),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:1011:26: error: 'QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H' undeclared here (not in a function); did you mean 'QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H'?
> 1011 | QMP_PHY_INIT_CFG(QPHY_V6_PCS_USB3_RCVR_DTCT_DLY_U3_H, 0x00),
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/phy/qualcomm/phy-qcom-qmp-usb.c:78:27: note: in definition of macro 'QMP_PHY_INIT_CFG'
> 78 | .offset = o, \
> | ^
>
> Caused by commit
>
> 685dbd1b2306 ("phy: qcom-qmp-usb: Add Qualcomm SDX75 USB3 PHY support")
>
> I have used the usb tree from next-20231003 for today.
Thanks, I've now reverted this from my tree.
greg k-h