Re: [PATCH V13 4/4] arm64: dts: ipq6018: add pwm node

[Krzysztof Kozlowski]

On 04/10/2023 11:04, Devi Priya wrote:
> Describe the PWM block on IPQ6018.
> 
> The PWM is in the TCSR area. Make &tcsr "simple-mfd" compatible, and add
> &pwm as child of &tcsr.
> 

...

> v3: s/qcom,pwm-ipq6018/qcom,ipq6018-pwm/ (Rob Herring)
> 
>  arch/arm64/boot/dts/qcom/ipq6018.dtsi | 15 ++++++++++++++-
>  1 file changed, 14 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index e59b9df96c7e..429ad7cb681c 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -390,8 +390,21 @@ tcsr_mutex: hwlock@1905000 {
>  		};
>  
>  		tcsr: syscon@1937000 {
> -			compatible = "qcom,tcsr-ipq6018", "syscon";
> +			compatible = "qcom,tcsr-ipq6018", "syscon", "simple-mfd";
>  			reg = <0x0 0x01937000 0x0 0x21000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0x0 0x0 0x01937000 0x21000>;

Please put ranges just after reg.

With that:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Best regards,
Krzysztof