Re: [PATCH] serial: imx: fix tx statemachine deadlock

[Greg KH]

On Wed, Oct 04, 2023 at 11:57:22AM +0200, Paul Geurts wrote:
> When using the serial port as RS485 port, the tx statemachine is used to
> control the RTS pin to drive the RS485 transceiver TX_EN pin. When the
> TTY port is closed in the middle of a transmission (for instance during
> userland application crash), imx_uart_shutdown disables the interface
> and disables the Transmission Complete interrupt. afer that,
> imx_uart_stop_tx bails on an incomplete transmission, to be retriggered
> by the TC interrupt. This interrupt is disabled and therefore the tx
> statemachine never transitions out of SEND. The statemachine is in
> deadlock now, and the TX_EN remains low, making the interface useless.
> 
> imx_uart_stop_tx now checks for incomplete transmission AND whether TC
> interrupts are enabled before bailing to be retriggered. This makes sure
> the state machine handling is reached, and is properly set to
> WAIT_AFTER_SEND.
> 
> Signed-off-by: Paul Geurts <paul_geurts@xxxxxxx>
> ---
>  drivers/tty/serial/imx.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

What commit id does this fix?

thanks,

greg k-h