Re: [PATCH v5 net-next 2/4] net: ethernet: ti: am65-cpsw: add mqprio qdisc offload in channel mode

[Vladimir Oltean]

On Wed, Sep 27, 2023 at 10:27:39AM +0300, Roger Quadros wrote:
> diff --git a/drivers/net/ethernet/ti/am65-cpsw-qos.c b/drivers/net/ethernet/ti/am65-cpsw-qos.c
> index f91137d8e73b..991221d8f148 100644
> --- a/drivers/net/ethernet/ti/am65-cpsw-qos.c
> +++ b/drivers/net/ethernet/ti/am65-cpsw-qos.c
> @@ -16,10 +16,19 @@
>  #include "cpsw_ale.h"
>  
>  #define AM65_CPSW_REG_CTL			0x004
> +#define AM65_CPSW_P0_REG_TX_PRI_MAP		0x018
> +#define AM65_CPSW_P0_REG_RX_PRI_MAP		0x020
> +#define AM65_CPSW_P0_REG_FIFO_STATUS		0x050
> +#define AM65_CPSW_P0_REG_PRI_CIR(pri)		(0x140 + 4 * (pri))
> +#define AM65_CPSW_P0_REG_PRI_EIR(pri)		(0x160 + 4 * (pri))
> +
>  #define AM65_CPSW_PN_REG_CTL			0x004
> +#define AM65_CPSW_PN_REG_TX_PRI_MAP		0x018
> +#define AM65_CPSW_PN_REG_RX_PRI_MAP		0x020
>  #define AM65_CPSW_PN_REG_FIFO_STATUS		0x050
>  #define AM65_CPSW_PN_REG_EST_CTL		0x060
>  #define AM65_CPSW_PN_REG_PRI_CIR(pri)		(0x140 + 4 * (pri))
> +#define AM65_CPSW_PN_REG_PRI_EIR(pri)		(0x160 + 4 * (pri))
>  
>  /* AM65_CPSW_REG_CTL register fields */
>  #define AM65_CPSW_CTL_EST_EN			BIT(18)
> @@ -50,12 +59,18 @@
>  #define AM65_CPSW_FETCH_ALLOW_MSK		GENMASK(7, 0)
>  #define AM65_CPSW_FETCH_ALLOW_MAX		AM65_CPSW_FETCH_ALLOW_MSK
>  
> +#define TO_MBPS(x)	((x) * 8 / 1000000)
> +
>  enum timer_act {
>  	TACT_PROG,		/* need program timer */
>  	TACT_NEED_STOP,		/* need stop first */
>  	TACT_SKIP_PROG,		/* just buffer can be updated */
>  };
>  
> +/* number of priority queues per port FIFO */
> +#define AM65_CPSW_PN_FIFO_PRIO_NUM		8
> +#define AM65_CPSW_PN_TX_PRI_MAP_DEFAULT		0x76543210

> +static void am65_cpsw_reset_tc_mqprio(struct net_device *ndev)
> +{
> +	struct am65_cpsw_port *port = am65_ndev_to_port(ndev);
> +	struct am65_cpsw_mqprio *p_mqprio = &port->qos.mqprio;
> +	struct am65_cpsw_common *common = port->common;
> +
> +	p_mqprio->shaper_en = false;
> +	p_mqprio->max_rate_total = 0;
> +
> +	am65_cpsw_tx_pn_shaper_reset(port);
> +	netdev_reset_tc(ndev);
> +	netif_set_real_num_tx_queues(ndev, common->tx_ch_num);

If this never gets changed from the value set by am65_cpsw_nuss_ndo_slave_open(),
then there is no reason to call netif_set_real_num_tx_queues() here.

> +
> +	/* Reset all Queue priorities to 0 */
> +	writel(0, port->port_base + AM65_CPSW_PN_REG_TX_PRI_MAP);

To 0 or to AM65_CPSW_PN_TX_PRI_MAP_DEFAULT (which is now unused)?
Also, do I understand correctly that immediately after boot, TX_PRI_MAP
will have a different value than after the deletion of the mqprio root qdisc
(if AM65_CPSW_PN_TX_PRI_MAP_DEFAULT represents the hardware default value)?
The behavior needs to be identical in the 2 cases, since both represent
"no mqprio offload".

> +}
> +
> +static int am65_cpsw_setup_mqprio(struct net_device *ndev, void *type_data)
> +{
> +	struct am65_cpsw_port *port = am65_ndev_to_port(ndev);
> +	struct am65_cpsw_mqprio *p_mqprio = &port->qos.mqprio;
> +	struct tc_mqprio_qopt_offload *mqprio = type_data;
> +	struct am65_cpsw_common *common = port->common;
> +	struct tc_mqprio_qopt *qopt = &mqprio->qopt;
> +	int tc, offset, count, ret, prio;
> +	u8 num_tc = qopt->num_tc;
> +	u32 tx_prio_map = 0;
> +	int i;
> +
> +	memcpy(&p_mqprio->mqprio_hw, mqprio, sizeof(*mqprio));
> +
> +	ret = pm_runtime_get_sync(common->dev);
> +	if (ret < 0) {
> +		pm_runtime_put_noidle(common->dev);
> +		return ret;
> +	}
> +
> +	if (!num_tc) {
> +		am65_cpsw_reset_tc_mqprio(ndev);
> +		goto exit_put;
> +	}
> +
> +	ret = am65_cpsw_mqprio_verify_shaper(port, mqprio);
> +	if (ret)
> +		goto exit_put;

At "exit_put" we have "return 0" and this discards the value of "ret".

> +
> +	netdev_set_num_tc(ndev, num_tc);
> +
> +	/* Multiple Linux priorities can map to a Traffic Class
> +	 * A Traffic Class can have multiple contiguous Queues,
> +	 * Queues get mapped to Channels (thread_id),
> +	 *	if not VLAN tagged, thread_id is used as packet_priority
> +	 *	if VLAN tagged. VLAN priority is used as packet_priorit
> +	 * packet_priority gets mapped to header_priority in p0_rx_pri_map,
> +	 * header_priority gets mapped to switch_priority in pn_tx_pri_map.
> +	 * As p0_rx_pri_map is left at defaults (0x76543210), we can
> +	 * assume that Queue_n gets mapped to header_priority_n. We can then
> +	 * set the switch priority in pn_tx_pri_map.
> +	 */
> +
> +	for (tc = 0; tc < num_tc; tc++) {
> +		prio = tc;
> +
> +		/* For simplicity we assign the same priority (TCn) to
> +		 * all queues of a Traffic Class.
> +		 */
> +		for (i = qopt->offset[tc]; i < qopt->offset[tc] + qopt->count[tc]; i++)
> +			tx_prio_map |= prio << (4 * i);
> +
> +		count = qopt->count[tc];
> +		offset = qopt->offset[tc];
> +		netdev_set_tc_queue(ndev, tc, count, offset);
> +	}

I think this is okay.

> +
> +	writel(tx_prio_map,
> +	       port->port_base + AM65_CPSW_PN_REG_TX_PRI_MAP);

Nit: This can be written on a single line.

> +
> +	am65_cpsw_tx_pn_shaper_apply(port);
> +
> +exit_put:
> +	pm_runtime_put(common->dev);
> +	return 0;
> +}
> +
>  int am65_cpsw_qos_ndo_setup_tc(struct net_device *ndev, enum tc_setup_type type,
>  			       void *type_data)
>  {