Re: [PATCH 1/1] tty: n_gsm: Avoid sleeping during .write() whilst atomic

[Greg Kroah-Hartman]

On Thu, Oct 05, 2023 at 11:43:11AM +0100, Lee Jones wrote:
> On Thu, 05 Oct 2023, Greg Kroah-Hartman wrote:
> 
> > On Thu, Oct 05, 2023 at 10:03:11AM +0100, Lee Jones wrote:
> > > On Wed, 04 Oct 2023, Greg Kroah-Hartman wrote:
> > > 
> > > > On Wed, Oct 04, 2023 at 01:57:04PM +0100, Lee Jones wrote:
> > > > > On Wed, 04 Oct 2023, Greg Kroah-Hartman wrote:
> > > > > 
> > > > > > On Wed, Oct 04, 2023 at 09:57:20AM +0100, Lee Jones wrote:
> > > > > > > On Wed, 04 Oct 2023, Greg Kroah-Hartman wrote:
> > > > > > > 
> > > > > > > > On Wed, Oct 04, 2023 at 05:59:09AM +0000, Starke, Daniel wrote:
> > > > > > > > > > Daniel, any thoughts?
> > > > > > > > > 
> > > > > > > > > Our application of this protocol is only with specific modems to enable
> > > > > > > > > circuit switched operation (handling calls, selecting/querying networks,
> > > > > > > > > etc.) while doing packet switched communication (i.e. IP traffic over PPP).
> > > > > > > > > The protocol was developed for such use cases.
> > > > > > > > > 
> > > > > > > > > Regarding the issue itself:
> > > > > > > > > There was already an attempt to fix all this by switching from spinlocks to
> > > > > > > > > mutexes resulting in ~20% performance loss. However, the patch was reverted
> > > > > > > > > as it did not handle the T1 timer leading into sleep during atomic within
> > > > > > > > > gsm_dlci_t1() on every mutex lock there.
> > > > > > > 
> > > > > > > That's correct.  When I initially saw this report, my initial thought
> > > > > > > was to replace the spinlocks with mutexts, but having read the previous
> > > > > > > accepted attempt and it's subsequent reversion I started to think of
> > > > > > > other ways to solve this issue.  This solution, unlike the last, does
> > > > > > > not involve adding sleep inducing locks into atomic contexts, nor
> > > > > > > should it negatively affect performance.
> > > > > > > 
> > > > > > > > > There was also a suggestion to fix this in do_con_write() as
> > > > > > > > > tty_operations::write() appears to be documented as "not allowed to sleep".
> > > > > > > > > The patch for this was rejected. It did not fix the issue within n_gsm.
> > > > > > > > > 
> > > > > > > > > Link: https://lore.kernel.org/all/20221203215518.8150-1-pchelkin@xxxxxxxxx/
> > > > > > > > > Link: https://lore.kernel.org/all/20221212023530.2498025-1-zengheng4@xxxxxxxxxx/
> > > > > > > > > Link: https://lore.kernel.org/all/5a994a13-d1f2-87a8-09e4-a877e65ed166@xxxxxxxxxx/
> > > > > > > > 
> > > > > > > > Ok, I thought I remembered this, I'll just drop this patch from my
> > > > > > > > review queue and wait for a better solution if it ever comes up as this
> > > > > > > > isn't a real issue that people are seeing on actual systems, but just a
> > > > > > > > syzbot report.
> > > > > > > 
> > > > > > > What does the "better solution" look like?
> > > > > > 
> > > > > > One that actually fixes the root problem here (i.e. does not break the
> > > > > > recursion loop, or cause a performance decrease for normal users, or
> > > > > > prevent this from being bound to the console).
> > > > > 
> > > > > Does this solution break the recursion loop or affect performance?
> > > > 
> > > > This solution broke the recursion by returning an error, right?
> > > 
> > > This is the part I was least sure about.
> > > 
> > > If this was considered valid and we were to go forward with a solution
> > > like this, what would a quality improvement look like?  Should we have
> > > stayed in this function and waited for the previous occupant to leave
> > > before continuing through ->write()?
> > 
> > This isn't valid, as it obviously never shows up in real use.
> > 
> > The real solution should be to prevent binding a console to this line
> > discipline as it can not handle the recursion that consoles require for
> > the write path.
> 
> Would something like this tick that box?
> 
> diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
> index 1f3aba607cd51..5c1d2fcd5d9e2 100644
> --- a/drivers/tty/n_gsm.c
> +++ b/drivers/tty/n_gsm.c
> @@ -3716,6 +3716,10 @@ static ssize_t gsmld_write(struct tty_struct *tty, struct file *file,
>         if (!gsm)
>                 return -ENODEV;
>  
> +       /* The GSM line discipline does not support binding to console */
> +       if (strncmp(tty->name, "tty", 3))
> +               return -EINVAL;

No, that's not going to work, some consoles do not start with "tty" :(

thanks,

greg k-h