Re: [PATCH v2 1/3] dt-bindings: mtd: fixed-partitions: Add binman compatible

From: Michael Walle
Date: Thu Oct 05 2023 - 11:37:58 EST


Hi,

>> >> Add a compatible string for binman, so we can extend fixed-partitions
>> >> in various ways.
>> >
>> > I've been thinking at the proper way to describe the binman partitions.
>> > I am wondering if we should really extend the fixed-partitions
>> > schema. This description is really basic and kind of supposed to remain
>> > like that. Instead, I wonder if we should not just keep the binman
>> > compatible alone, like many others already. This way it would be very clear
>> > what is expected and allowed in both cases. I am thinking about
>> > something like that:
>> >
>> > Documentation/devicetree/bindings/mtd/partitions/brcm,bcm4908-partitions.yaml
>> >
>> > this file is also referenced there (but this patch does the same, which
>> > is what I'd expect):
>> >
>> > Documentation/devicetree/bindings/mtd/partitions/partitions.yaml
>> >
>> > I'll let the binding maintainers judge whether they think it's
>> > relevant, it's not a strong opposition.
>>
>> What is the overall goal here? To replace the current binman node
>> which is
>> usually contained in the -u-boot.dtsi files? If one is using binman to
>> create an image, is it expected that one needs to adapt the DT in
>> linux?
>> Or will it still be a seperate -u-boot.dtsi? > Because in the latter
>> case
>> I see that there will be conflicts because you have to overwrite the
>> flash node. Or will it be a seperate node with all the information
>> duplicated?
>
> The goal is simply to have a full binding for firmware layout, such
> that firmware images can be created, examined and updated. The
> -u-boot.dtsi files are a stopgap while we sort out a real binding.
> They should eventually go away.

You haven't answered whether this node should be a seperate binman
node - or if you'll reuse the existing flash (partitions) node(s) and
add any missing property there. If it's the latter, I don't think
compatible = "binman", "fixed-partitions"; is correct.

My intent is to make it compatible, so wouldn't it make sense to have
binman as the first compatible, then falling back to fixed-partitions
as the second?

As far as I know, the compatibles should get more specific with each
string. But "binman" seems to be used as a kind of tag which could be
added to any compatible under the flash node. What if one wants to build
an image which isn't compatible = "fixed-partitions"? E.g.
"linksys,ns-partitions", will it then have
compatible = "binman", "linksys,ns-partitions"?


>> Maybe (a more complete) example would be helpful.
>
> Can you please be a bit more specific? What is missing from the
> example?

Like a complete (stripped) DTS. Right now I just see how the individual
node looks like. But with a complete example DTS, my question from above
would have been answered.

So to give an example myself, please correct it if it's wrong. From
our board (kontron-sl28):

&fspi {
status = "okay";

flash@0 {
compatible = "jedec,spi-nor";
m25p,fast-read;
spi-max-frequency = <133000000>;
reg = <0>;
/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
spi-tx-bus-width = <1>; /* 1 SPI Tx line */

partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;

partition@0 {
reg = <0x000000 0x010000>;
label = "rcw";
read-only;
};

partition@10000 {
reg = <0x010000 0x1d0000>;
label = "failsafe bootloader";
read-only;
};

partition@200000 {
reg = <0x200000 0x010000>;
label = "configuration store";
};

partition@210000 {
reg = <0x210000 0x1d0000>;
label = "bootloader";
};

partition@3e0000 {
reg = <0x3e0000 0x020000>;
label = "bootloader environment";
};
};
};
};

In u-boot we use binman, see arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
in the u-boot repository.

Now to use the new method, am I expected to adapt the dts in the
linux kernel? As far as I understand that is the case. So that node
from above would look something like the following:

&fspi {
status = "okay";

flash@0 {
compatible = "jedec,spi-nor";
m25p,fast-read;
spi-max-frequency = <133000000>;
reg = <0>;
/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
spi-tx-bus-width = <1>; /* 1 SPI Tx line */

partitions {
compatible = "binman", "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
[..]
partition@210000 {
reg = <0x210000 0x1d0000>;
label = "u-boot"; /* or "u-boot+atf" ? */
};

partition@3e0000 {
reg = <0x3e0000 0x020000>;
label = "bootloader environment";
};
};
};
};

I'm still not sure why that compatible is needed. Also I'd need to change
the label which might break user space apps looking for that specific name.

Also, our board might have u-boot/spl or u-boot/spl/bl31/bl32, right now
that's something which depends on an u-boot configuration variable, which
then enables or disables binman nodes in the -u-boot.dtsi. So in linux
we only have that "bootloader" partition, but there might be either
u-boot+spl or u-boot+spl+bl31+bl32.

Honestly, I'm really not sure this should go into a device tree.

What if a board uses eMMC to store the firmware binaries? Will that then
be a subnode to the eMMC device?

I thought there was a way to link the partition nodes and the device
using a property, without having the partition info as a subnode of
the device. But I may have imagined it as I cannot find it now. So
yes, it will be a subnode of the eMMC device.

Not sure if that will fly.

-michael