[PATCH v2] KVM: x86: Refine calculation of guest wall clock to use a single TSC read

[David Woodhouse]

From: David Woodhouse <dwmw@xxxxxxxxxxxx>

When populating the guest's PV wall clock information, KVM currently does
a simple 'kvm_get_real_ns() - get_kvmclock_ns(kvm)'. This is an antipattern
which should be avoided; when working with the relationship between two
clocks, it's never correct to obtain one of them "now" and then the other
at a slightly different "now" after an unspecified period of preemption
(which might not even be under the control of the kernel, if this is an
L1 hosting an L2 guest under nested virtualization).

Add a kvm_get_wall_clock_epoch() function to return the guest wall clock
epoch in nanoseconds using the same method as __get_kvmclock() — by using
kvm_get_walltime_and_clockread() to calculate both the wall clock and KVM
clock time from a *single* TSC reading.

The condition using get_cpu_tsc_khz() is equivalent to the version in
__get_kvmclock() which separately checks for the CONSTANT_TSC feature or
the per-CPU cpu_tsc_khz. Which is what get_cpu_tsc_khz() does anyway.

Signed-off-by: David Woodhouse <dwmw@xxxxxxxxxxxx>
---
 • v2: Improve comments, zero local_tsc_khz each time round the loop,
       move put_cpu() a little earlier.

 arch/x86/kvm/x86.c | 85 ++++++++++++++++++++++++++++++++++++++++++----
 arch/x86/kvm/x86.h |  2 ++
 arch/x86/kvm/xen.c |  4 +--
 3 files changed, 82 insertions(+), 9 deletions(-)

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a3a02d62aa6a..14267bacd5db 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2331,14 +2331,9 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock, int sec_hi_o
 	if (kvm_write_guest(kvm, wall_clock, &version, sizeof(version)))
 		return;
 
-	/*
-	 * The guest calculates current wall clock time by adding
-	 * system time (updated by kvm_guest_time_update below) to the
-	 * wall clock specified here.  We do the reverse here.
-	 */
-	wall_nsec = ktime_get_real_ns() - get_kvmclock_ns(kvm);
+	wall_nsec = kvm_get_wall_clock_epoch(kvm);
 
-	wc.nsec = do_div(wall_nsec, 1000000000);
+	wc.nsec = do_div(wall_nsec, NSEC_PER_SEC);
 	wc.sec = (u32)wall_nsec; /* overflow in 2106 guest time */
 	wc.version = version;
 
@@ -3243,6 +3238,82 @@ static int kvm_guest_time_update(struct kvm_vcpu *v)
 	return 0;
 }
 
+/*
+ * The pvclock_wall_clock ABI tells the guest the wall clock time at
+ * which it started (i.e. its epoch, when its kvmclock was zero).
+ *
+ * In fact those clocks are subtly different; wall clock frequency is
+ * adjusted by NTP and has leap seconds, while the kvmclock is a
+ * simple function of the TSC without any such adjustment.
+ *
+ * Perhaps the ABI should have exposed CLOCK_TAI and a ratio between
+ * that and kvmclock, but even that would be subject to change over
+ * time.
+ *
+ * Attempt to calculate the epoch at a given moment using the *same*
+ * TSC reading via kvm_get_walltime_and_clockread() to obtain both
+ * wallclock and kvmclock times, and subtracting one from the other.
+ *
+ * Fall back to using their values at slightly different moments by
+ * calling ktime_get_real_ns() and get_kvmclock_ns() separately.
+ */
+uint64_t kvm_get_wall_clock_epoch(struct kvm *kvm)
+{
+#ifdef CONFIG_X86_64
+	struct pvclock_vcpu_time_info hv_clock;
+	struct kvm_arch *ka = &kvm->arch;
+	unsigned long seq, local_tsc_khz;
+	struct timespec64 ts;
+	uint64_t host_tsc;
+
+	do {
+		seq = read_seqcount_begin(&ka->pvclock_sc);
+
+		local_tsc_khz = 0;
+		if (!ka->use_master_clock)
+			break;
+
+		/*
+		 * The TSC read and the call to get_cpu_tsc_khz() must happen
+		 * on the same CPU.
+		 */
+		get_cpu();
+
+		local_tsc_khz = get_cpu_tsc_khz();
+
+		if (local_tsc_khz &&
+		    !kvm_get_walltime_and_clockread(&ts, &host_tsc))
+			local_tsc_khz = 0; /* Fall back to old method */
+
+		put_cpu();
+
+		/*
+		 * These values must be snapshotted within the seqcount loop.
+		 * After that, it's just mathematics which can happen on any
+		 * CPU at any time.
+		 */
+		hv_clock.tsc_timestamp = ka->master_cycle_now;
+		hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset;
+
+	} while (read_seqcount_retry(&ka->pvclock_sc, seq));
+
+	/*
+	 * If the conditions were right, and obtaining the wallclock+TSC was
+	 * successful, calculate the KVM clock at the corresponding time and
+	 * subtract one from the other to get the guest's epoch in nanoseconds
+	 * since 1970-01-01.
+	 */
+	if (local_tsc_khz) {
+		kvm_get_time_scale(NSEC_PER_SEC, local_tsc_khz * NSEC_PER_USEC,
+				   &hv_clock.tsc_shift,
+				   &hv_clock.tsc_to_system_mul);
+		return ts.tv_nsec + NSEC_PER_SEC * ts.tv_sec -
+			__pvclock_read_cycles(&hv_clock, host_tsc);
+	}
+#endif
+	return ktime_get_real_ns() - get_kvmclock_ns(kvm);
+}
+
 /*
  * kvmclock updates which are isolated to a given vcpu, such as
  * vcpu->cpu migration, should not allow system_timestamp from
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 1e7be1f6ab29..ed1a69942347 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -290,6 +290,8 @@ static inline bool kvm_check_has_quirk(struct kvm *kvm, u64 quirk)
 	return !(kvm->arch.disabled_quirks & quirk);
 }
 
+uint64_t kvm_get_wall_clock_epoch(struct kvm *kvm);
+
 void kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq, int inc_eip);
 
 u64 get_kvmclock_ns(struct kvm *kvm);
diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c
index c539f18e0b60..e53fad915a62 100644
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -59,7 +59,7 @@ static int kvm_xen_shared_info_init(struct kvm *kvm, gfn_t gfn)
 		 * This code mirrors kvm_write_wall_clock() except that it writes
 		 * directly through the pfn cache and doesn't mark the page dirty.
 		 */
-		wall_nsec = ktime_get_real_ns() - get_kvmclock_ns(kvm);
+		wall_nsec = kvm_get_wall_clock_epoch(kvm);
 
 		/* It could be invalid again already, so we need to check */
 		read_lock_irq(&gpc->lock);
@@ -98,7 +98,7 @@ static int kvm_xen_shared_info_init(struct kvm *kvm, gfn_t gfn)
 	wc_version = wc->version = (wc->version + 1) | 1;
 	smp_wmb();
 
-	wc->nsec = do_div(wall_nsec,  1000000000);
+	wc->nsec = do_div(wall_nsec, NSEC_PER_SEC);
 	wc->sec = (u32)wall_nsec;
 	*wc_sec_hi = wall_nsec >> 32;
 	smp_wmb();
-- 
2.40.1

Attachment: smime.p7s
Description: S/MIME cryptographic signature