[PATCH v1 01/11] leds: aw200xx: fix write to DIM parameter

[Dmitry Rokosov]

From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxxxxx>

If write only DIM value to the page 4, LED brightness will not be
updated, as both DIM and FADE need to be written to the page 4.
Therefore, write DIM to the page 1.

Fixes: 36a87f371b7a ("leds: Add AW20xx driver")
Signed-off-by: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxxxxx>
Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
---
 drivers/leds/leds-aw200xx.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/leds/leds-aw200xx.c b/drivers/leds/leds-aw200xx.c
index 96979b8e09b7..4c1e7caf8941 100644
--- a/drivers/leds/leds-aw200xx.c
+++ b/drivers/leds/leds-aw200xx.c
@@ -74,6 +74,10 @@
 #define AW200XX_LED2REG(x, columns) \
 	((x) + (((x) / (columns)) * (AW200XX_DSIZE_COLUMNS_MAX - (columns))))
 
+/* DIM current configuration register on page 1 */
+#define AW200XX_REG_DIM_PAGE1(x, columns) \
+	AW200XX_REG(AW200XX_PAGE1, AW200XX_LED2REG(x, columns))
+
 /*
  * DIM current configuration register (page 4).
  * The even address for current DIM configuration.
@@ -153,7 +157,8 @@ static ssize_t dim_store(struct device *dev, struct device_attribute *devattr,
 
 	if (dim >= 0) {
 		ret = regmap_write(chip->regmap,
-				   AW200XX_REG_DIM(led->num, columns), dim);
+				   AW200XX_REG_DIM_PAGE1(led->num, columns),
+				   dim);
 		if (ret)
 			goto out_unlock;
 	}
-- 
2.36.0