Re: [PATCH v7 5/7] drm/msm/dp: incorporate pm_runtime framework into DP driver

[Dmitry Baryshkov]

On Sat, 7 Oct 2023 at 01:55, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
>
> Currently DP driver is executed independent of PM runtime framework.
> This leads msm eDP panel can not being detected by edp_panel driver
> during generic_edp_panel_probe() due to AUX DPCD read failed at
> edp panel driver. Incorporate PM runtime framework into DP driver so
> that host controller's power and clocks are enable/disable through
> PM runtime mechanism.  Once PM runtime framework is incorporated into
> DP driver, waking up device from power up path is not necessary. Hence
> remove it.
>
> After incorporating pm_runtime framework into eDP/DP driver,
> dp_pm_suspend() to handle power off both DP phy and controller during
> suspend and dp_pm_resume() to handle power on both DP phy and controller
> during resume are not necessary. Therefore both dp_pm_suspend() and
> dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and
> dp_pm_runtime_resume() respectively.
>
> Changes in v7:
> -- add comments to dp_pm_runtime_resume()
> -- add comments to dp_bridge_hpd_enable()
> -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify()
>
> Changes in v6:
> -- delete dp_power_client_deinit(dp->power);
> -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle()
> -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle()
> -- add IRQF_NO_AUTOEN to devm_request_irq()
> -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend()
> -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable()
>
> Changes in v5:
> -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync()
> -- squash add pm_runtime_force_suspend()/resume() patch into this patch
>
> Changes in v4:
> -- reworded commit text to explain why pm_framework is required for
>    edp panel
> -- reworded commit text to explain autosuspend is choiced
> -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3
> -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3
> -- return value from pm_runtime_resume_and_get() directly
> -- check return value of devm_pm_runtime_enable()
> -- delete pm_runtime_xxx from dp_display_remove()
> -- drop dp_display_host_init() from EV_HPD_INIT_SETUP
> -- drop both dp_pm_prepare() and dp_pm_compete() from this change
> -- delete ST_SUSPENDED state
> -- rewording commit text to add more details regrading the purpose
>    of this change
>
> Changes in v3:
> -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch
> -- use pm_runtime_resume_and_get() instead of pm_runtime_get()
> -- error checking pm_runtime_resume_and_get() return value
> -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case
> -- replace dp_pm_suspend() with pm_runtime_force_suspend()
> -- replace dp_pm_resume() with pm_runtime_force_resume()
>
> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

> ---
>  drivers/gpu/drm/msm/dp/dp_aux.c     |   5 +
>  drivers/gpu/drm/msm/dp/dp_display.c | 177 ++++++++++++++----------------------
>  drivers/gpu/drm/msm/dp/dp_power.c   |  16 ----
>  drivers/gpu/drm/msm/dp/dp_power.h   |  11 ---
>  4 files changed, 72 insertions(+), 137 deletions(-)


-- 
With best wishes
Dmitry