Re: [PATCH v2 2/3] dt-bindings: input: Add bindings for TouchNetix axiom touchscreen

[Krzysztof Kozlowski]

On 09/10/2023 15:44, Kamel Bouhara wrote:
> Add the TouchNetix axiom I2C touchscreen device tree bindings
> documentation.

A nit, subject: drop second/last, redundant "bindings for". The
"dt-bindings" prefix is already stating that these are bindings.

> 
> Signed-off-by: Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
> ---
>  .../touchscreen/touchnetix,axiom-ax54a.yaml   | 51 +++++++++++++++++++
>  MAINTAINERS                                   |  6 +++
>  2 files changed, 57 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/touchnetix,axiom-ax54a.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchnetix,axiom-ax54a.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchnetix,axiom-ax54a.yaml
> new file mode 100644
> index 000000000000..41201d7112a6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/touchnetix,axiom-ax54a.yaml
> @@ -0,0 +1,51 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/touchnetix,axiom-ax54a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TouchNetix Axiom series touchscreen controller
> +
> +maintainers:
> +  - Kamel Bouhara <kamel.bouhara@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: touchnetix,axiom-ax54a
> +
> +  reg:
> +    const: 0x66
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  irq-gpios:
> +    maxItems: 1

Why these are GPIOs? Interrupts are usually just interrupts... You need
to clearly describe this.


> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +additionalProperties: false

This goes after required: block.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      axiom@66 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation



> +        compatible = "touchnetix,axiom-ax54a";
> +        reg = <0x66>;
> +        interrupt-parent = <&gpio2>;
> +        interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> +        irq-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;

Eh? This looks really wrong.


Best regards,
Krzysztof