Re: [PATCH v1 1/2] arm64: perf: Add support for event counting threshold

From: James Clark
Date: Tue Oct 10 2023 - 08:48:29 EST

Next message: alisadariana: "[PATCH v4 0/3] iio: adc: ad7192: Add improvements and feature"
Previous message: Gustavo A. R. Silva: "[PATCH][next] atags_proc: Add __counted_by for struct buffer and use struct_size()"
In reply to: Suzuki K Poulose: "Re: [PATCH v1 1/2] arm64: perf: Add support for event counting threshold"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 10/10/2023 12:03, Suzuki K Poulose wrote:
> On 09/10/2023 17:30, James Clark wrote:
>>
>>
>> On 09/10/2023 13:50, Suzuki K Poulose wrote:
>>> Hi James
>>>
>>> On 19/09/2023 10:51, James Clark wrote:
>>>> FEAT_PMUv3_TH (Armv8.8) permits a PMU counter to increment only on
>>>> events whose count meets a specified threshold condition. For
>>>> example if
>>>> PMEVTYPERn.TC (Threshold Control) is set to 0b101 (Greater than or
>>>> equal, count), and the threshold is set to 2, then the PMU counter will
>>>> now only increment by 1 when an event would have previously incremented
>>>> the PMU counter by 2 or more on a single processor cycle.
>>>>
>>>> Two new Perf event config fields, 'threshold' and 'threshold_control'
>>>> have been added for controlling the feature:
>>>>
>>>>     $ perf stat -e stall_slot/threshold=2,threshold_control=5/
>>>>
>>>> A new capability for reading out the maximum supported threshold value
>>>> has also been added:
>>>>
>>>>     $ cat /sys/bus/event_source/devices/armv8_pmuv3/caps/threshold_max
>>>>
>>>>     0x000000ff
>>>>
>>>> If a threshold higher than threshold_max is provided, then no error is
>>>> generated but the threshold is clamped to the max value. If
>>>> FEAT_PMUv3_TH isn't implemented, then threshold_max reads zero, and
>>>> neither the 'threshold' nor 'threshold_control' parameters will be
>>>> used.
>>>>
>>>> The threshold is per PMU counter, and there are potentially different
>>>> threshold_max values per PMU type on heterogeneous systems.
>>>>
>>>> Bits higher than 32 now need to be written into PMEVTYPER, so
>>>> armv8pmu_write_evtype() has to be updated to take a u64 value rather
>>>> than u32.
>>>
>>> Is this supported in the Aarch32 state ? If so, do we need to change
>>> the arch specific register read/write "helpers" ?
>>>
>>
>> It's half supported. PMMIR.THWIDTH is readable and non-zero in aarch32,
>> but the threshold value can't be written because it's in the high part
>> of the event type register. Thresholding does affect aarch32 guests when
>> enabled from the host, but that doesn't really concern the code.
>>
>> But yes you're right, it isn't building on aarch32 at the moment so I
>> need to do a V2. I'm going to make it so the max width is reported as 0
>> in sysfs for aarch32, and then don't ever try to write to the high part
>> of the event type (which was part of the compilation error anyway). No
>> change will be needed to the read/write helpers though, they already
>> handle 32/64 bits for the right platforms.
>>
>>>>
>>>> Signed-off-by: James Clark <james.clark@xxxxxxx>
>>>> ---
>>>>    drivers/perf/arm_pmuv3.c       | 59
>>>> +++++++++++++++++++++++++++++++++-
>>>>    include/linux/perf/arm_pmuv3.h | 7 +++-
>>>>    2 files changed, 64 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/perf/arm_pmuv3.c b/drivers/perf/arm_pmuv3.c
>>>> index e5a2ac4155f6..ad6574b2bdab 100644
>>>> --- a/drivers/perf/arm_pmuv3.c
>>>> +++ b/drivers/perf/arm_pmuv3.c
>>>> @@ -294,9 +294,16 @@ static const struct attribute_group
>>>> armv8_pmuv3_events_attr_group = {
>>>>        .is_visible = armv8pmu_event_attr_is_visible,
>>>>    };
>>>>    +#define TH_LO    2
>>>> +#define TH_HI    13
>>>> +#define TH_CNTL_LO    14
>>>> +#define TH_CNTL_HI    16
>>>> +
>>>>    PMU_FORMAT_ATTR(event, "config:0-15");
>>>>    PMU_FORMAT_ATTR(long, "config1:0");
>>>>    PMU_FORMAT_ATTR(rdpmc, "config1:1");
>>>> +PMU_FORMAT_ATTR(threshold, "config1:" __stringify(TH_LO) "-"
>>>> __stringify(TH_HI));
>>>> +PMU_FORMAT_ATTR(threshold_control, "config1:" __stringify(TH_CNTL_LO)
>>>> "-" __stringify(TH_CNTL_HI));
>>>
>>> The perf core doesn't yet support adding aliases for
>>> fields other than "events". May be we could add
>>> some support for that in the future and use it
>>> to provide meaningful aliases for the threshold
>>> control.
>>>
>>
>> I think it could be useful, but I'm wondering about the use case. To
>> make use of this feature you would probably need to have the docs or
>> reference manual open anyway, and that gives you the names of the
>> control values. Any tool could trivially hold the list of names too.
>>
>> But I suppose you could say the same about event names, and we go
>> through some effort to report those.
>>
>>> Not sure if we can extrapolate threshold_control[0]
>>> to be another config field => "counting_mode"
>>> We would need to check with the architecture folks
>>> to confirm that the meaning wouldn't change though.
>>>
>>
>> I think if was planned to be fixed in that way it would have already
>> been written that way? And I doubt they would agree to promise to not
>> re-use another value that didn't fit the pattern in the future. Then
>> we'd be in a big mess because we deviated from the reference manual and
>> it would be hard to re-map around whatever new value was introduced.
>
> Having looked at the spec again, it is indeed fixed. All 8 possible
> values are defined for the TC and all of them follow the rule of
> bit0 => 1 => counting mode
>
> That kind of makes it easier for people to go one step closer to
> use the field without having to refer to the Arm ARM all the time.
>
> Suzuki
>

Yep I agree. I thought there were empty values, but as the whole field
is filled already I can split it into two new attributes.

>
>
>>
>>>>    static int sysctl_perf_user_access __read_mostly;
>>>>    @@ -310,10 +317,22 @@ static inline bool
>>>> armv8pmu_event_want_user_access(struct perf_event *event)
>>>>        return event->attr.config1 & 0x2;
>>>>    }
>>>>    +static inline u32 armv8pmu_event_threshold(struct perf_event_attr
>>>> *attr)
>>>> +{
>>>> +    return FIELD_GET(GENMASK(TH_HI, TH_LO), attr->config1);
>>>> +}
>>>> +
>>>> +static inline u8 armv8pmu_event_threshold_control(struct
>>>> perf_event_attr *attr)
>>>> +{
>>>> +    return FIELD_GET(GENMASK(TH_CNTL_HI, TH_CNTL_LO), attr->config1);
>>>> +}
>>>> +
>>>>    static struct attribute *armv8_pmuv3_format_attrs[] = {
>>>>        &format_attr_event.attr,
>>>>        &format_attr_long.attr,
>>>>        &format_attr_rdpmc.attr,
>>>> +    &format_attr_threshold.attr,
>>>> +    &format_attr_threshold_control.attr,
>>>>        NULL,
>>>>    };
>>>>    @@ -365,10 +384,31 @@ static ssize_t bus_width_show(struct device
>>>> *dev, struct device_attribute *attr,
>>>>    static DEVICE_ATTR_RO(bus_width);
>>>>    +static u32 threshold_max(struct arm_pmu *cpu_pmu)
>>>> +{
>>>> +    /*
>>>> +     * The largest value that can be written to PMEVTYPER<n>_EL0.TH is
>>>> +     * (2 ^ PMMIR.THWIDTH) - 1
>>>> +     */
>>>> +    return (1 << FIELD_GET(ARMV8_PMU_THWIDTH, cpu_pmu->reg_pmmir))
>>>> - 1;
>>>> +}
>>>> +
>>>> +static ssize_t threshold_max_show(struct device *dev,
>>>> +                  struct device_attribute *attr, char *page)
>>>> +{
>>>> +    struct pmu *pmu = dev_get_drvdata(dev);
>>>> +    struct arm_pmu *cpu_pmu = container_of(pmu, struct arm_pmu, pmu);
>>>> +
>>>> +    return sysfs_emit(page, "0x%08x\n", threshold_max(cpu_pmu));
>>>> +}
>>>> +
>>>> +static DEVICE_ATTR_RO(threshold_max);
>>>> +
>>>>    static struct attribute *armv8_pmuv3_caps_attrs[] = {
>>>>        &dev_attr_slots.attr,
>>>>        &dev_attr_bus_slots.attr,
>>>>        &dev_attr_bus_width.attr,
>>>> +    &dev_attr_threshold_max.attr,
>>>>        NULL,
>>>>    };
>>>>    @@ -552,7 +592,7 @@ static void armv8pmu_write_counter(struct
>>>> perf_event *event, u64 value)
>>>>            armv8pmu_write_hw_counter(event, value);
>>>>    }
>>>>    -static inline void armv8pmu_write_evtype(int idx, u32 val)
>>>> +static inline void armv8pmu_write_evtype(int idx, u64 val)>> {
>>>>        u32 counter = ARMV8_IDX_TO_COUNTER(idx);
>>>>    @@ -912,6 +952,10 @@ static int armv8pmu_set_event_filter(struct
>>>> hw_perf_event *event,
>>>>                         struct perf_event_attr *attr)
>>>>    {
>>>>        unsigned long config_base = 0;
>>>> +    struct perf_event *perf_event = container_of(attr, struct
>>>> perf_event,
>>>> +                             attr);
>>>> +    struct arm_pmu *cpu_pmu = to_arm_pmu(perf_event->pmu);
>>>> +    u32 th, th_max;
>>>>          if (attr->exclude_idle)
>>>>            return -EPERM;
>>>> @@ -943,6 +987,19 @@ static int armv8pmu_set_event_filter(struct
>>>> hw_perf_event *event,
>>>>        if (attr->exclude_user)
>>>>            config_base |= ARMV8_PMU_EXCLUDE_EL0;
>>>>    +    /*
>>>> +     * Insert event counting threshold (FEAT_PMUv3_TH) values. If
>>>> +     * FEAT_PMUv3_TH isn't implemented, then THWIDTH (threshold_max)
>>>> will be
>>>> +     * 0 and no values will be written.
>>>> +     */
>>>> +    th_max = threshold_max(cpu_pmu);
>>>> +    if (th_max) {
>>>> +        th = min(armv8pmu_event_threshold(attr), th_max);
>>>> +        config_base |= FIELD_PREP(ARMV8_PMU_EVTYPE_TH, th);
>>>> +        config_base |= FIELD_PREP(ARMV8_PMU_EVTYPE_TC,
>>>> +                      armv8pmu_event_threshold_control(attr));
>>>> +    }
>>>> +
>>>>        /*
>>>>         * Install the filter into config_base as this is used to
>>>>         * construct the event type.
>>>> diff --git a/include/linux/perf/arm_pmuv3.h
>>>> b/include/linux/perf/arm_pmuv3.h
>>>> index e3899bd77f5c..0e2a3c927150 100644
>>>> --- a/include/linux/perf/arm_pmuv3.h
>>>> +++ b/include/linux/perf/arm_pmuv3.h
>>>> @@ -228,7 +228,11 @@
>>>>    /*
>>>>     * PMXEVTYPER: Event selection reg
>>>>     */
>>>> -#define ARMV8_PMU_EVTYPE_MASK    0xc800ffff    /* Mask for writable
>>>> bits */
>>>> +#define ARMV8_PMU_EVTYPE_TH    GENMASK(43, 32)
>>>> +#define ARMV8_PMU_EVTYPE_TC    GENMASK(63, 61)
>>>> +/* Mask for writable bits */
>>>> +#define ARMV8_PMU_EVTYPE_MASK    (0xc800ffff | ARMV8_PMU_EVTYPE_TH | \
>>>> +                ARMV8_PMU_EVTYPE_TC)
>>>
>>> May need to be UL suffixed for safety ?
>>>
>>
>> I don't think it's strictly needed because GENMASK makes a UL so the
>> whole expression is auto promoted anyway. But I can add it for
>> completeness.
>>
>> Also these will be split across the two asm/arm_pmuv3.h files in v2
>> because I need to keep the original mask for aarch32, so it will look a
>> little bit different.
>>
>> Thanks
>> James
>>
>>>
>>> Suzuki
>>>
>>>>    #define ARMV8_PMU_EVTYPE_EVENT    0xffff        /* Mask for EVENT
>>>> bits */
>>>>    /*
>>>> @@ -254,6 +258,7 @@
>>>>    #define ARMV8_PMU_BUS_SLOTS_MASK 0xff
>>>>    #define ARMV8_PMU_BUS_WIDTH_SHIFT 16
>>>>    #define ARMV8_PMU_BUS_WIDTH_MASK 0xf
>>>> +#define ARMV8_PMU_THWIDTH GENMASK(23, 20)
>>>>    /*
>>>>     * This code is really good
>>>
>>>
>

Next message: alisadariana: "[PATCH v4 0/3] iio: adc: ad7192: Add improvements and feature"
Previous message: Gustavo A. R. Silva: "[PATCH][next] atags_proc: Add __counted_by for struct buffer and use struct_size()"
In reply to: Suzuki K Poulose: "Re: [PATCH v1 1/2] arm64: perf: Add support for event counting threshold"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]