Re: [PATCH v5 3/4] cpufreq: qcom-nvmem: add support for IPQ8064

[Konrad Dybcio]

On 9/30/23 12:21, Robert Marko wrote:
> From: Christian Marangi <ansuelsmth@xxxxxxxxx>
>
> IPQ8064 comes in 3 families:
> * IPQ8062 up to 1.0GHz
> * IPQ8064/IPQ8066/IPQ8068 up to 1.4GHz
> * IPQ8065/IPQ8069 up to 1.7Ghz
>
> So, in order to be able to support one OPP table, add support for
> IPQ8064 family based of SMEM SoC ID-s and correctly set the version so
> opp-supported-hw can be correctly used.
>
> Bit are set with the following logic:
> * IPQ8062 BIT 0
> * IPQ8064/IPQ8066/IPQ8068 BIT 1
> * IPQ8065/IPQ8069 BIT 2
>
> speed is never fused, only pvs values are fused.
>
> IPQ806x SoC doesn't have pvs_version so we drop and we use the new
> pattern:
> opp-microvolt-speed0-pvs<PSV_VALUE>
>
> Example:
> - for ipq8062 psv2
>    opp-microvolt-speed0-pvs2 = < 925000 878750 971250>
>
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> Signed-off-by: Robert Marko <robimarko@xxxxxxxxx>
> ---
[...]

> +{
> +	int speed = 0, pvs = 0, pvs_ver = 0;
> +	int msm_id, ret = 0;
> +	u8 *speedbin;
> +	size_t len;
> +
> +	speedbin = nvmem_cell_read(speedbin_nvmem, &len);
> +
> +	if (IS_ERR(speedbin))
The stray newline above this line triggers my OCD :D

> +		return PTR_ERR(speedbin);
> +
> +	if (len != 4) {
> +		dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
> +		kfree(speedbin);
> +		return -ENODEV;
> +	}
> +
> +	get_krait_bin_format_a(cpu_dev, &speed, &pvs, &pvs_ver, speedbin);
> +
> +	ret = qcom_smem_get_soc_id(&msm_id);
> +	if (ret)
> +		return ret;
speedbin leaks here

you can free it right after the get_krait.. call
> +
> +	switch (msm_id) {
> +	case QCOM_ID_IPQ8062:
> +		drv->versions = BIT(IPQ8062_VERSION);
> +		break;
> +	case QCOM_ID_IPQ8064:
> +	case QCOM_ID_IPQ8066:
> +	case QCOM_ID_IPQ8068:
> +		drv->versions = BIT(IPQ8064_VERSION);
> +		break;
> +	case QCOM_ID_IPQ8065:
> +	case QCOM_ID_IPQ8069:
> +		drv->versions = BIT(IPQ8065_VERSION);
> +		break;
> +	default:
> +		dev_err(cpu_dev,
> +			"SoC ID %u is not part of IPQ8064 family, limiting to 1.0GHz!\n",
> +			msm_id);
> +		drv->versions = BIT(IPQ8062_VERSION);
> +		break;
> +	}
> +
> +	/* IPQ8064 speed is never fused. Only pvs values are fused. */
> +	snprintf(*pvs_name, sizeof("speedXX-pvsXX"), "speed%d-pvs%d",
> +		 speed, pvs);
Then drop the format for `speed` and just throw in a zero!

[...]

> -	{ .compatible = "qcom,ipq8064", .data = &match_data_krait },
> +	{ .compatible = "qcom,ipq8064", .data = &match_data_ipq8064 },
This change demands a Fixes tag, because you're essentially saying "the 
support for this SoC was supposedly there, but it could have never 
worked and was broken all along".

Konrad