Re: [RFC PATCH 0/3] Add HiSilicon system timer driver

[Marc Zyngier]

On Tue, 10 Oct 2023 13:30:30 +0100,
Yicong Yang <yangyicong@xxxxxxxxxx> wrote:
> 
> From: Yicong Yang <yangyicong@xxxxxxxxxxxxx>
> 
> HiSilicon system timer is a memory mapped platform timer compatible with
> the arm's generic timer specification. The timer supports both SPI and
> LPI interrupt and can be enumerated through ACPI DSDT table. Since the
> timer is fully compatible with the spec, it can reuse most codes of the
> arm_arch_timer driver. However since the arm_arch_timer driver only
> supports GTDT and SPI interrupt, this series support the HiSilicon system
> timer by:
> 
> - refactor some of the arm_arch_timer codes and export the function to
>   register a arch memory timer by other drivers
> - retrieve the IO memory and interrupt resource through DSDT in a separate
>   driver, then setup and register the clockevent device reuse the arm_arch_timer
>   function
> 
> Using LPI for the timer is mentioned in BSA Spec section 3.8.1 (DEN0094C 1.0C).

This strikes me as pretty odd. LPIs are, by definition, *edge*
triggered. The timer interrupt must be *level* triggered. So there
must be some bridge in the middle that is going to regenerate edges on
EOI, and that cannot be architectural.

What am I missing?

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.