Re: [PATCH v6 2/3] media: dt-bindings: media: i2c: Add bindings for TW9900

[Mehdi Djait]

Hi laurent,

Thank you for the review.

On Mon, Oct 09, 2023 at 05:18:38AM +0300, Laurent Pinchart wrote:
> Hi Mehdi,
> 
> Thank you for the patch.
> 
> On Fri, Oct 06, 2023 at 06:25:29PM +0200, Mehdi Djait wrote:
> > The Techwell TW9900 is a video decoder supporting multiple input
> > standards, such as PAL and NTSC, and outputs a BT.656 video
> > signal.
> > 
> > It's designed to be low-power, posesses some features such as a
> > programmable comb-filter, and automatic input standard detection
> > 
> > Signed-off-by: Mehdi Djait <mehdi.djait@xxxxxxxxxxx>
> > ---
> > V5->V6: 
> > - This commit had a "Reviewed-by: Rob Herring <robh@xxxxxxxxxx>" Tag but
> >   decided not to collect it because the last Iteration was more than 2
> >   years ago
> > - removed SECAM from the mentioned standards
> > - changed maintainer
> > 
> > V4->V5: 
> > - renamed the file to match the compatible string, and referenced
> >   the graph.yaml schema
> > 
> > V3->V4: 
> > - add the missing reset-gpios node to the binding
> > 
> > V2->V3: 
> > - fix the example not compiling due to a typo in the reset-gpios
> >   node.
> > 
> >  .../bindings/media/i2c/techwell,tw9900.yaml   | 61 +++++++++++++++++++
> >  1 file changed, 61 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
> > new file mode 100644
> > index 000000000000..24bbbff5cc01
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
> > @@ -0,0 +1,61 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/techwell,tw9900.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Techwell TW9900 NTSC/PAL video decoder
> > +
> > +maintainers:
> > +  - Mehdi Djait <mehdi.djait@xxxxxxxxxxx>
> > +
> > +description:
> > +  The tw9900 is a multi-standard video decoder, supporting NTSC, PAL standards
> > +  with auto-detection features.
> > +
> > +properties:
> > +  compatible:
> > +    const: techwell,tw9900
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  vdd-supply:
> > +    description: VDD power supply
> > +
> > +  reset-gpios:
> > +    description: GPIO descriptor for the RESET input pin
> > +    maxItems: 1
> 
> How about the power down GPIO ?

I will add the power-down GPIO.

> 
> The chip requires a clock, which is provided by a crystal oscillator in
> the block diagram I found. Does it also support an external clock ? If
> so the bindings should support it, although this could be added later.
> 
> > +
> > +  port:
> > +    $ref: /schemas/graph.yaml#/properties/port
> > +    description:
> > +      Video port for the decoder output.
> 
> How about input ports, connected to nodes that model the connector(s) ?
>  

Could this be added later. Tbh I am not familiar with this. 
But if it must be added now: Would this be a correct binding: 

  ports:
    $ref: /schemas/graph.yaml#/properties/ports

    patternProperties:
      "^port@[0-1]$":
        $ref: /schemas/graph.yaml#/properties/port
        description: Input port nodes for analog inputs.

    properties:
      port@2:
        $ref: /schemas/graph.yaml#/properties/port
        description: Video port for the decoder output.

and in the example:
...
            ports {
                #address-cells = <1>;
                #size-cells = <0>;

                port@2 {
                    reg = <2>;

                    endpoint {
                        remote-endpoint = <&vip_in>;
                    };
                };
            };
...

--
Kind Regards
Mehdi Djait