[tip: x86/mm] x86/sev: Move sev_setup_arch() to mem_encrypt.c
From: tip-bot2 for Alexander Shishkin
Date: Wed Oct 11 2023 - 04:30:22 EST
The following commit has been merged into the x86/mm branch of tip:
Commit-ID: 6e74b125155dc8c747d76fb45d8e6d20e9e4fb4d
Gitweb: https://git.kernel.org/tip/6e74b125155dc8c747d76fb45d8e6d20e9e4fb4d
Author: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
AuthorDate: Tue, 10 Oct 2023 17:52:19 +03:00
Committer: Ingo Molnar <mingo@xxxxxxxxxx>
CommitterDate: Wed, 11 Oct 2023 10:15:47 +02:00
x86/sev: Move sev_setup_arch() to mem_encrypt.c
Since commit:
4d96f9109109b ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()")
... the SWIOTLB bounce buffer size adjustment and restricted virtio memory
setting also inadvertently apply to TDX: the code is using
cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT) as a gatekeeping condition,
which is also true for TDX, and this is also what we want.
To reflect this, move the corresponding code to generic mem_encrypt.c.
No functional changes intended.
Signed-off-by: Alexander Shishkin <alexander.shishkin@xxxxxxxxxxxxxxx>
Signed-off-by: Ingo Molnar <mingo@xxxxxxxxxx>
Reviewed-by: Tom Lendacky <thomas.lendacky@xxxxxxx>
Link: https://lore.kernel.org/r/20231010145220.3960055-2-alexander.shishkin@xxxxxxxxxxxxxxx
---
arch/x86/include/asm/mem_encrypt.h | 4 +--
arch/x86/kernel/setup.c | 2 +-
arch/x86/mm/mem_encrypt.c | 34 ++++++++++++++++++++++++++++-
arch/x86/mm/mem_encrypt_amd.c | 35 +-----------------------------
4 files changed, 37 insertions(+), 38 deletions(-)
diff --git a/arch/x86/include/asm/mem_encrypt.h b/arch/x86/include/asm/mem_encrypt.h
index 473b16d..359ada4 100644
--- a/arch/x86/include/asm/mem_encrypt.h
+++ b/arch/x86/include/asm/mem_encrypt.h
@@ -19,8 +19,10 @@
#ifdef CONFIG_X86_MEM_ENCRYPT
void __init mem_encrypt_init(void);
+void __init mem_encrypt_setup_arch(void);
#else
static inline void mem_encrypt_init(void) { }
+static inline void __init mem_encrypt_setup_arch(void) { }
#endif
#ifdef CONFIG_AMD_MEM_ENCRYPT
@@ -43,7 +45,6 @@ void __init sme_map_bootdata(char *real_mode_data);
void __init sme_unmap_bootdata(char *real_mode_data);
void __init sme_early_init(void);
-void __init sev_setup_arch(void);
void __init sme_encrypt_kernel(struct boot_params *bp);
void __init sme_enable(struct boot_params *bp);
@@ -73,7 +74,6 @@ static inline void __init sme_map_bootdata(char *real_mode_data) { }
static inline void __init sme_unmap_bootdata(char *real_mode_data) { }
static inline void __init sme_early_init(void) { }
-static inline void __init sev_setup_arch(void) { }
static inline void __init sme_encrypt_kernel(struct boot_params *bp) { }
static inline void __init sme_enable(struct boot_params *bp) { }
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b9145a6..ec44dc5 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -1124,7 +1124,7 @@ void __init setup_arch(char **cmdline_p)
* Needs to run after memblock setup because it needs the physical
* memory size.
*/
- sev_setup_arch();
+ mem_encrypt_setup_arch();
efi_fake_memmap();
efi_find_mirror();
diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
index 9f27e14..c290c55 100644
--- a/arch/x86/mm/mem_encrypt.c
+++ b/arch/x86/mm/mem_encrypt.c
@@ -12,6 +12,7 @@
#include <linux/swiotlb.h>
#include <linux/cc_platform.h>
#include <linux/mem_encrypt.h>
+#include <linux/virtio_anchor.h>
/* Override for DMA direct allocation check - ARCH_HAS_FORCE_DMA_UNENCRYPTED */
bool force_dma_unencrypted(struct device *dev)
@@ -86,3 +87,36 @@ void __init mem_encrypt_init(void)
print_mem_encrypt_feature_info();
}
+
+void __init mem_encrypt_setup_arch(void)
+{
+ phys_addr_t total_mem = memblock_phys_mem_size();
+ unsigned long size;
+
+ if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
+ return;
+
+ /*
+ * For SEV and TDX, all DMA has to occur via shared/unencrypted pages.
+ * Kernel uses SWIOTLB to make this happen without changing device
+ * drivers. However, depending on the workload being run, the
+ * default 64MB of SWIOTLB may not be enough and SWIOTLB may
+ * run out of buffers for DMA, resulting in I/O errors and/or
+ * performance degradation especially with high I/O workloads.
+ *
+ * Adjust the default size of SWIOTLB using a percentage of guest
+ * memory for SWIOTLB buffers. Also, as the SWIOTLB bounce buffer
+ * memory is allocated from low memory, ensure that the adjusted size
+ * is within the limits of low available memory.
+ *
+ * The percentage of guest memory used here for SWIOTLB buffers
+ * is more of an approximation of the static adjustment which
+ * 64MB for <1G, and ~128M to 256M for 1G-to-4G, i.e., the 6%
+ */
+ size = total_mem * 6 / 100;
+ size = clamp_val(size, IO_TLB_DEFAULT_SIZE, SZ_1G);
+ swiotlb_adjust_size(size);
+
+ /* Set restricted memory access for virtio. */
+ virtio_set_mem_acc_cb(virtio_require_restricted_mem_acc);
+}
diff --git a/arch/x86/mm/mem_encrypt_amd.c b/arch/x86/mm/mem_encrypt_amd.c
index 6faea41..62dde75 100644
--- a/arch/x86/mm/mem_encrypt_amd.c
+++ b/arch/x86/mm/mem_encrypt_amd.c
@@ -20,7 +20,6 @@
#include <linux/bitops.h>
#include <linux/dma-mapping.h>
#include <linux/virtio_config.h>
-#include <linux/virtio_anchor.h>
#include <linux/cc_platform.h>
#include <asm/tlbflush.h>
@@ -215,40 +214,6 @@ void __init sme_map_bootdata(char *real_mode_data)
__sme_early_map_unmap_mem(__va(cmdline_paddr), COMMAND_LINE_SIZE, true);
}
-void __init sev_setup_arch(void)
-{
- phys_addr_t total_mem = memblock_phys_mem_size();
- unsigned long size;
-
- if (!cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT))
- return;
-
- /*
- * For SEV, all DMA has to occur via shared/unencrypted pages.
- * SEV uses SWIOTLB to make this happen without changing device
- * drivers. However, depending on the workload being run, the
- * default 64MB of SWIOTLB may not be enough and SWIOTLB may
- * run out of buffers for DMA, resulting in I/O errors and/or
- * performance degradation especially with high I/O workloads.
- *
- * Adjust the default size of SWIOTLB for SEV guests using
- * a percentage of guest memory for SWIOTLB buffers.
- * Also, as the SWIOTLB bounce buffer memory is allocated
- * from low memory, ensure that the adjusted size is within
- * the limits of low available memory.
- *
- * The percentage of guest memory used here for SWIOTLB buffers
- * is more of an approximation of the static adjustment which
- * 64MB for <1G, and ~128M to 256M for 1G-to-4G, i.e., the 6%
- */
- size = total_mem * 6 / 100;
- size = clamp_val(size, IO_TLB_DEFAULT_SIZE, SZ_1G);
- swiotlb_adjust_size(size);
-
- /* Set restricted memory access for virtio. */
- virtio_set_mem_acc_cb(virtio_require_restricted_mem_acc);
-}
-
static unsigned long pg_level_to_pfn(int level, pte_t *kpte, pgprot_t *ret_prot)
{
unsigned long pfn = 0;