[PATCH v13 4/6] nvmem: core: Rework layouts to become regular devices

From: Miquel Raynal
Date: Wed Oct 11 2023 - 07:16:04 EST

Current layout support was initially written without modules support in
mind. When the requirement for module support rose, the existing base
was improved to adopt modularization support, but kind of a design flaw
was introduced. With the existing implementation, when a storage device
registers into NVMEM, the core tries to hook a layout (if any) and
populates its cells immediately. This means, if the hardware description
expects a layout to be hooked up, but no driver was provided for that,
the storage medium will fail to probe and try later from
scratch. Even if we consider that the hardware description shall be
correct, we could still probe the storage device (especially if it
contains the rootfs).

One way to overcome this situation is to consider the layouts as
devices, and leverage the existing notifier mechanism. When a new NVMEM
device is registered, we can:
- populate its nvmem-layout child, if any
- try to modprobe the relevant driver, if relevant
- try to hook the NVMEM device with a layout in the notifier
And when a new layout is registered:
- try to hook all the existing NVMEM devices which are not yet hooked to
a layout with the new layout
This way, there is no strong order to enforce, any NVMEM device creation
or NVMEM layout driver insertion will be observed as a new event which
may lead to the creation of additional cells, without disturbing the
probes with costly (and sometimes endless) deferrals.

In order to achieve that goal we need:
* To keep track of all nvmem devices
* To create a new bus for the nvmem-layouts with minimal logic to match
nvmem-layout devices with nvmem-layout drivers.
All this infrastructure code is created in the layouts.c file.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Tested-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
drivers/nvmem/Makefile | 2 +-
drivers/nvmem/core.c | 130 ++++--------------
drivers/nvmem/internals.h | 21 +++
drivers/nvmem/layouts.c | 228 +++++++++++++++++++++++++++++++
drivers/nvmem/layouts/onie-tlv.c | 23 +++-
drivers/nvmem/layouts/sl28vpd.c | 23 +++-
include/linux/nvmem-provider.h | 34 ++---
7 files changed, 335 insertions(+), 126 deletions(-)
create mode 100644 drivers/nvmem/layouts.c

diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 423baf089515..77be96076ea6 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -4,7 +4,7 @@
#

obj-$(CONFIG_NVMEM) += nvmem_core.o
-nvmem_core-y := core.o
+nvmem_core-y := core.o layouts.o
obj-y += layouts/

# Devices
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index eefb5d0a0c91..0e364b8e9f99 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -55,9 +55,6 @@ static LIST_HEAD(nvmem_lookup_list);

static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);

-static DEFINE_SPINLOCK(nvmem_layout_lock);
-static LIST_HEAD(nvmem_layouts);
-
static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
void *val, size_t bytes)
{
@@ -741,91 +738,22 @@ static int nvmem_add_cells_from_fixed_layout(struct nvmem_device *nvmem)
return err;
}

-int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner)
+int nvmem_layout_register(struct nvmem_layout *layout)
{
- layout->owner = owner;
+ if (!layout->add_cells)
+ return -EINVAL;

- spin_lock(&nvmem_layout_lock);
- list_add(&layout->node, &nvmem_layouts);
- spin_unlock(&nvmem_layout_lock);
-
- blocking_notifier_call_chain(&nvmem_notifier, NVMEM_LAYOUT_ADD, layout);
-
- return 0;
+ /* Populate the cells */
+ return layout->add_cells(&layout->nvmem->dev, layout->nvmem, layout);
}
-EXPORT_SYMBOL_GPL(__nvmem_layout_register);
+EXPORT_SYMBOL_GPL(nvmem_layout_register);

void nvmem_layout_unregister(struct nvmem_layout *layout)
{
- blocking_notifier_call_chain(&nvmem_notifier, NVMEM_LAYOUT_REMOVE, layout);
-
- spin_lock(&nvmem_layout_lock);
- list_del(&layout->node);
- spin_unlock(&nvmem_layout_lock);
+ /* Keep the API even with an empty stub in case we need it later */
}
EXPORT_SYMBOL_GPL(nvmem_layout_unregister);

-static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
-{
- struct device_node *layout_np;
- struct nvmem_layout *l, *layout = ERR_PTR(-EPROBE_DEFER);
-
- layout_np = of_nvmem_layout_get_container(nvmem);
- if (!layout_np)
- return NULL;
-
- /*
- * In case the nvmem device was built-in while the layout was built as a
- * module, we shall manually request the layout driver loading otherwise
- * we'll never have any match.
- */
- of_request_module(layout_np);
-
- spin_lock(&nvmem_layout_lock);
-
- list_for_each_entry(l, &nvmem_layouts, node) {
- if (of_match_node(l->of_match_table, layout_np)) {
- if (try_module_get(l->owner))
- layout = l;
-
- break;
- }
- }
-
- spin_unlock(&nvmem_layout_lock);
- of_node_put(layout_np);
-
- return layout;
-}
-
-static void nvmem_layout_put(struct nvmem_layout *layout)
-{
- if (layout)
- module_put(layout->owner);
-}
-
-static int nvmem_add_cells_from_layout(struct nvmem_device *nvmem)
-{
- struct nvmem_layout *layout = nvmem->layout;
- int ret;
-
- if (layout && layout->add_cells) {
- ret = layout->add_cells(&nvmem->dev, nvmem, layout);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-#if IS_ENABLED(CONFIG_OF)
-struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
-{
- return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
-}
-EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container);
-#endif
-
const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
struct nvmem_layout *layout)
{
@@ -833,7 +761,7 @@ const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
const struct of_device_id *match;

layout_np = of_nvmem_layout_get_container(nvmem);
- match = of_match_node(layout->of_match_table, layout_np);
+ match = of_match_node(layout->dev.driver->of_match_table, layout_np);

return match ? match->data : NULL;
}
@@ -944,19 +872,6 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
goto err_put_device;
}

- /*
- * If the driver supplied a layout by config->layout, the module
- * pointer will be NULL and nvmem_layout_put() will be a noop.
- */
- nvmem->layout = config->layout ?: nvmem_layout_get(nvmem);
- if (IS_ERR(nvmem->layout)) {
- rval = PTR_ERR(nvmem->layout);
- nvmem->layout = NULL;
-
- if (rval == -EPROBE_DEFER)
- goto err_teardown_compat;
- }
-
if (config->cells) {
rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
if (rval)
@@ -975,7 +890,7 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
if (rval)
goto err_remove_cells;

- rval = nvmem_add_cells_from_layout(nvmem);
+ rval = nvmem_populate_layout(nvmem);
if (rval)
goto err_remove_cells;

@@ -983,16 +898,17 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)

rval = device_add(&nvmem->dev);
if (rval)
- goto err_remove_cells;
+ goto err_destroy_layout;
+

blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);

return nvmem;

+err_destroy_layout:
+ nvmem_destroy_layout(nvmem);
err_remove_cells:
nvmem_device_remove_all_cells(nvmem);
- nvmem_layout_put(nvmem->layout);
-err_teardown_compat:
if (config->compat)
nvmem_sysfs_remove_compat(nvmem, config);
err_put_device:
@@ -1014,7 +930,7 @@ static void nvmem_device_release(struct kref *kref)
device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);

nvmem_device_remove_all_cells(nvmem);
- nvmem_layout_put(nvmem->layout);
+ nvmem_destroy_layout(nvmem);
device_unregister(&nvmem->dev);
}

@@ -1400,7 +1316,10 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id)
of_node_put(cell_np);
if (!cell_entry) {
__nvmem_device_put(nvmem);
- return ERR_PTR(-ENOENT);
+ if (nvmem->layout)
+ return ERR_PTR(-EAGAIN);
+ else
+ return ERR_PTR(-ENOENT);
}

cell = nvmem_create_cell(cell_entry, id, cell_index);
@@ -2096,11 +2015,22 @@ EXPORT_SYMBOL_GPL(nvmem_dev_name);

static int __init nvmem_init(void)
{
- return bus_register(&nvmem_bus_type);
+ int ret;
+
+ ret = bus_register(&nvmem_bus_type);
+ if (ret)
+ return ret;
+
+ ret = nvmem_layout_bus_register();
+ if (ret)
+ bus_unregister(&nvmem_bus_type);
+
+ return ret;
}

static void __exit nvmem_exit(void)
{
+ nvmem_layout_bus_unregister();
bus_unregister(&nvmem_bus_type);
}

diff --git a/drivers/nvmem/internals.h b/drivers/nvmem/internals.h
index ce353831cd65..c669c96e9052 100644
--- a/drivers/nvmem/internals.h
+++ b/drivers/nvmem/internals.h
@@ -32,4 +32,25 @@ struct nvmem_device {
void *priv;
};

+#if IS_ENABLED(CONFIG_OF)
+int nvmem_layout_bus_register(void);
+void nvmem_layout_bus_unregister(void);
+int nvmem_populate_layout(struct nvmem_device *nvmem);
+void nvmem_destroy_layout(struct nvmem_device *nvmem);
+#else /* CONFIG_OF */
+static inline int nvmem_layout_bus_register(void)
+{
+ return 0;
+}
+
+static inline void nvmem_layout_bus_unregister(void) {}
+
+static inline int nvmem_populate_layout(struct nvmem_device *nvmem)
+{
+ return 0;
+}
+
+static inline void nvmem_destroy_layout(struct nvmem_device *nvmem) { }
+#endif /* CONFIG_OF */
+
#endif /* ifndef _LINUX_NVMEM_INTERNALS_H */
diff --git a/drivers/nvmem/layouts.c b/drivers/nvmem/layouts.c
new file mode 100644
index 000000000000..8c73a8a15dd5
--- /dev/null
+++ b/drivers/nvmem/layouts.c
@@ -0,0 +1,228 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * NVMEM layout bus handling
+ *
+ * Copyright (C) 2023 Bootlin
+ * Author: Miquel Raynal <miquel.raynal@xxxxxxxxxxx
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#include "internals.h"
+
+#if IS_ENABLED(CONFIG_OF)
+#define to_nvmem_layout_driver(drv) \
+ (container_of((drv), struct nvmem_layout_driver, driver))
+#define to_nvmem_layout_device(_dev) \
+ container_of((_dev), struct nvmem_layout, dev)
+
+static int nvmem_layout_bus_match(struct device *dev, struct device_driver *drv)
+{
+ return of_driver_match_device(dev, drv);
+}
+
+static int nvmem_layout_bus_probe(struct device *dev)
+{
+ struct nvmem_layout_driver *drv = to_nvmem_layout_driver(dev->driver);
+ struct nvmem_layout *layout = to_nvmem_layout_device(dev);
+
+ if (!drv->probe || !drv->remove)
+ return -EINVAL;
+
+ return drv->probe(layout);
+}
+
+static void nvmem_layout_bus_remove(struct device *dev)
+{
+ struct nvmem_layout_driver *drv = to_nvmem_layout_driver(dev->driver);
+ struct nvmem_layout *layout = to_nvmem_layout_device(dev);
+
+ return drv->remove(layout);
+}
+
+static struct bus_type nvmem_layout_bus_type = {
+ .name = "nvmem-layout",
+ .match = nvmem_layout_bus_match,
+ .probe = nvmem_layout_bus_probe,
+ .remove = nvmem_layout_bus_remove,
+};
+
+static struct device nvmem_layout_bus = {
+ .init_name = "nvmem-layout",
+};
+
+int nvmem_layout_driver_register(struct nvmem_layout_driver *drv)
+{
+ drv->driver.bus = &nvmem_layout_bus_type;
+
+ return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(nvmem_layout_driver_register);
+
+void nvmem_layout_driver_unregister(struct nvmem_layout_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(nvmem_layout_driver_unregister);
+
+static void nvmem_layout_release_device(struct device *dev)
+{
+ struct nvmem_layout *layout = to_nvmem_layout_device(dev);
+
+ of_node_put(layout->dev.of_node);
+ kfree(layout);
+}
+
+static int nvmem_layout_create_device(struct nvmem_device *nvmem,
+ struct device_node *np)
+{
+ struct nvmem_layout *layout;
+ struct device *dev;
+ int ret;
+
+ layout = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!layout)
+ return -ENOMEM;
+
+ /* Create a bidirectional link */
+ layout->nvmem = nvmem;
+ nvmem->layout = layout;
+
+ /* Device model registration */
+ dev = &layout->dev;
+ device_initialize(dev);
+ dev->parent = &nvmem_layout_bus;
+ dev->bus = &nvmem_layout_bus_type;
+ dev->release = nvmem_layout_release_device;
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
+ dev->dma_mask = &dev->coherent_dma_mask;
+ device_set_node(dev, of_fwnode_handle(of_node_get(np)));
+ of_device_make_bus_id(dev);
+ of_msi_configure(dev, dev->of_node);
+
+ ret = device_add(dev);
+ if (ret) {
+ put_device(dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id of_nvmem_layout_skip_table[] = {
+ { .compatible = "fixed-layout", },
+ {}
+};
+
+static int nvmem_layout_bus_populate(struct nvmem_device *nvmem,
+ struct device_node *layout_dn)
+{
+ int ret;
+
+ /* Make sure it has a compatible property */
+ if (!of_get_property(layout_dn, "compatible", NULL)) {
+ pr_debug("%s() - skipping %pOF, no compatible prop\n",
+ __func__, layout_dn);
+ return 0;
+ }
+
+ /* Fixed layouts are parsed manually somewhere else for now */
+ if (of_match_node(of_nvmem_layout_skip_table, layout_dn)) {
+ pr_debug("%s() - skipping %pOF node\n", __func__, layout_dn);
+ return 0;
+ }
+
+ if (of_node_check_flag(layout_dn, OF_POPULATED_BUS)) {
+ pr_debug("%s() - skipping %pOF, already populated\n",
+ __func__, layout_dn);
+
+ return 0;
+ }
+
+ /* NVMEM layout buses expect only a single device representing the layout */
+ ret = nvmem_layout_create_device(nvmem, layout_dn);
+ if (ret)
+ return ret;
+
+ of_node_set_flag(layout_dn, OF_POPULATED_BUS);
+
+ return 0;
+}
+
+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
+{
+ return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
+}
+EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container);
+
+/*
+ * Returns the number of devices populated, 0 if the operation was not relevant
+ * for this nvmem device, an error code otherwise.
+ */
+int nvmem_populate_layout(struct nvmem_device *nvmem)
+{
+ struct device_node *nvmem_dn, *layout_dn;
+ int ret;
+
+ layout_dn = of_nvmem_layout_get_container(nvmem);
+ if (!layout_dn)
+ return 0;
+
+ nvmem_dn = of_node_get(nvmem->dev.of_node);
+ if (!nvmem_dn) {
+ of_node_put(layout_dn);
+ return 0;
+ }
+
+ /* Ensure the layout driver is loaded */
+ of_request_module(layout_dn);
+
+ /* Populate the layout device */
+ device_links_supplier_sync_state_pause();
+ ret = nvmem_layout_bus_populate(nvmem, layout_dn);
+ device_links_supplier_sync_state_resume();
+
+ of_node_put(nvmem_dn);
+ of_node_put(layout_dn);
+ return ret;
+}
+
+void nvmem_destroy_layout(struct nvmem_device *nvmem)
+{
+ struct device *dev = &nvmem->layout->dev;
+
+ of_node_clear_flag(dev->of_node, OF_POPULATED_BUS);
+ put_device(dev);
+}
+
+int nvmem_layout_bus_register(void)
+{
+ int ret;
+
+ ret = device_register(&nvmem_layout_bus);
+ if (ret) {
+ put_device(&nvmem_layout_bus);
+ return ret;
+ }
+
+ ret = bus_register(&nvmem_layout_bus_type);
+ if (ret) {
+ device_unregister(&nvmem_layout_bus);
+ return ret;
+ }
+
+ return 0;
+}
+
+void nvmem_layout_bus_unregister(void)
+{
+ bus_unregister(&nvmem_layout_bus_type);
+ device_unregister(&nvmem_layout_bus);
+}
+#endif
diff --git a/drivers/nvmem/layouts/onie-tlv.c b/drivers/nvmem/layouts/onie-tlv.c
index 59fc87ccfcff..8d19346b9206 100644
--- a/drivers/nvmem/layouts/onie-tlv.c
+++ b/drivers/nvmem/layouts/onie-tlv.c
@@ -226,16 +226,31 @@ static int onie_tlv_parse_table(struct device *dev, struct nvmem_device *nvmem,
return 0;
}

+static int onie_tlv_probe(struct nvmem_layout *layout)
+{
+ layout->add_cells = onie_tlv_parse_table;
+
+ return nvmem_layout_register(layout);
+}
+
+static void onie_tlv_remove(struct nvmem_layout *layout)
+{
+ nvmem_layout_unregister(layout);
+}
+
static const struct of_device_id onie_tlv_of_match_table[] = {
{ .compatible = "onie,tlv-layout", },
{},
};
MODULE_DEVICE_TABLE(of, onie_tlv_of_match_table);

-static struct nvmem_layout onie_tlv_layout = {
- .name = "ONIE tlv layout",
- .of_match_table = onie_tlv_of_match_table,
- .add_cells = onie_tlv_parse_table,
+static struct nvmem_layout_driver onie_tlv_layout = {
+ .driver = {
+ .name = "onie-tlv-layout",
+ .of_match_table = onie_tlv_of_match_table,
+ },
+ .probe = onie_tlv_probe,
+ .remove = onie_tlv_remove,
};
module_nvmem_layout_driver(onie_tlv_layout);

diff --git a/drivers/nvmem/layouts/sl28vpd.c b/drivers/nvmem/layouts/sl28vpd.c
index 05671371f631..ab4ceaf1ea16 100644
--- a/drivers/nvmem/layouts/sl28vpd.c
+++ b/drivers/nvmem/layouts/sl28vpd.c
@@ -135,16 +135,31 @@ static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem,
return 0;
}

+static int sl28vpd_probe(struct nvmem_layout *layout)
+{
+ layout->add_cells = sl28vpd_add_cells;
+
+ return nvmem_layout_register(layout);
+}
+
+static void sl28vpd_remove(struct nvmem_layout *layout)
+{
+ nvmem_layout_unregister(layout);
+}
+
static const struct of_device_id sl28vpd_of_match_table[] = {
{ .compatible = "kontron,sl28-vpd" },
{},
};
MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table);

-static struct nvmem_layout sl28vpd_layout = {
- .name = "sl28-vpd",
- .of_match_table = sl28vpd_of_match_table,
- .add_cells = sl28vpd_add_cells,
+static struct nvmem_layout_driver sl28vpd_layout = {
+ .driver = {
+ .name = "kontron-sl28vpd-layout",
+ .of_match_table = sl28vpd_of_match_table,
+ },
+ .probe = sl28vpd_probe,
+ .remove = sl28vpd_remove,
};
module_nvmem_layout_driver(sl28vpd_layout);

diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 2905f9e6fc2a..a0ea8326605a 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -9,6 +9,7 @@
#ifndef _LINUX_NVMEM_PROVIDER_H
#define _LINUX_NVMEM_PROVIDER_H

+#include <linux/device.h>
#include <linux/device/driver.h>
#include <linux/err.h>
#include <linux/errno.h>
@@ -154,15 +155,13 @@ struct nvmem_cell_table {
/**
* struct nvmem_layout - NVMEM layout definitions
*
- * @name: Layout name.
- * @of_match_table: Open firmware match table.
+ * @dev: Device-model layout device.
+ * @nvmem: The underlying NVMEM device
* @add_cells: Will be called if a nvmem device is found which
* has this layout. The function will add layout
* specific cells with nvmem_add_one_cell().
* @fixup_cell_info: Will be called before a cell is added. Can be
* used to modify the nvmem_cell_info.
- * @owner: Pointer to struct module.
- * @node: List node.
*
* A nvmem device can hold a well defined structure which can just be
* evaluated during runtime. For example a TLV list, or a list of "name=val"
@@ -170,17 +169,19 @@ struct nvmem_cell_table {
* cells.
*/
struct nvmem_layout {
- const char *name;
- const struct of_device_id *of_match_table;
+ struct device dev;
+ struct nvmem_device *nvmem;
int (*add_cells)(struct device *dev, struct nvmem_device *nvmem,
struct nvmem_layout *layout);
void (*fixup_cell_info)(struct nvmem_device *nvmem,
struct nvmem_layout *layout,
struct nvmem_cell_info *cell);
+};

- /* private */
- struct module *owner;
- struct list_head node;
+struct nvmem_layout_driver {
+ struct device_driver driver;
+ int (*probe)(struct nvmem_layout *layout);
+ void (*remove)(struct nvmem_layout *layout);
};

#if IS_ENABLED(CONFIG_NVMEM)
@@ -197,11 +198,15 @@ void nvmem_del_cell_table(struct nvmem_cell_table *table);
int nvmem_add_one_cell(struct nvmem_device *nvmem,
const struct nvmem_cell_info *info);

-int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner);
-#define nvmem_layout_register(layout) \
- __nvmem_layout_register(layout, THIS_MODULE)
+int nvmem_layout_register(struct nvmem_layout *layout);
void nvmem_layout_unregister(struct nvmem_layout *layout);

+int nvmem_layout_driver_register(struct nvmem_layout_driver *drv);
+void nvmem_layout_driver_unregister(struct nvmem_layout_driver *drv);
+#define module_nvmem_layout_driver(__nvmem_layout_driver) \
+ module_driver(__nvmem_layout_driver, nvmem_layout_driver_register, \
+ nvmem_layout_driver_unregister)
+
const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
struct nvmem_layout *layout);

@@ -257,9 +262,4 @@ static inline struct device_node *of_nvmem_layout_get_container(struct nvmem_dev
return NULL;
}
#endif /* CONFIG_NVMEM */
-
-#define module_nvmem_layout_driver(__layout_driver) \
- module_driver(__layout_driver, nvmem_layout_register, \
- nvmem_layout_unregister)
-
#endif /* ifndef _LINUX_NVMEM_PROVIDER_H */
--
2.34.1