[PATCH] riscv, qemu_fw_cfg: Add support for RISC-V architecture

[Björn Töpel]

From: Björn Töpel <bjorn@xxxxxxxxxxxx>

Qemu fw_cfg support was missing for RISC-V, which made it hard to do
proper vmcore dumps from qemu.

Add the missing RISC-V arch-defines.

You can now do vmcore dumps from qemu. Add "-device vmcoreinfo" to the
qemu command-line. From the qemu montior:
  (qemu) dump-guest-memory vmcore

The vmcore can now be used, e.g., with the "crash" utility.

Signed-off-by: Björn Töpel <bjorn@xxxxxxxxxxxx>
---
 drivers/firmware/Kconfig       | 2 +-
 drivers/firmware/qemu_fw_cfg.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig
index b59e3041fd62..f05ff56629b3 100644
--- a/drivers/firmware/Kconfig
+++ b/drivers/firmware/Kconfig
@@ -155,7 +155,7 @@ config RASPBERRYPI_FIRMWARE
 
 config FW_CFG_SYSFS
 	tristate "QEMU fw_cfg device support in sysfs"
-	depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || SPARC || X86)
+	depends on SYSFS && (ARM || ARM64 || PARISC || PPC_PMAC || RISCV || SPARC || X86)
 	depends on HAS_IOPORT_MAP
 	default n
 	help
diff --git a/drivers/firmware/qemu_fw_cfg.c b/drivers/firmware/qemu_fw_cfg.c
index a69399a6b7c0..1448f61173b3 100644
--- a/drivers/firmware/qemu_fw_cfg.c
+++ b/drivers/firmware/qemu_fw_cfg.c
@@ -211,7 +211,7 @@ static void fw_cfg_io_cleanup(void)
 
 /* arch-specific ctrl & data register offsets are not available in ACPI, DT */
 #if !(defined(FW_CFG_CTRL_OFF) && defined(FW_CFG_DATA_OFF))
-# if (defined(CONFIG_ARM) || defined(CONFIG_ARM64))
+# if (defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_RISCV))
 #  define FW_CFG_CTRL_OFF 0x08
 #  define FW_CFG_DATA_OFF 0x00
 #  define FW_CFG_DMA_OFF 0x10

base-commit: 1c8b86a3799f7e5be903c3f49fcdaee29fd385b5
-- 
2.39.2