RE: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C

[Flavio Suligoi]

Hi Rob,

... 
> >  .../bindings/leds/backlight/mps,mp3309c.yaml  | 82
> > +++++++++++++++++++
> >  1 file changed, 82 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> > b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yaml
> > new file mode 100644
> > index 000000000000..e2f9ae2b3fb4
> > --- /dev/null
> > +++
> b/Documentation/devicetree/bindings/leds/backlight/mps,mp3309c.yam
> > +++ l
> > @@ -0,0 +1,82 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/leds/backlight/mps,mp3309c.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: MPS MP3309C backlight
> > +
> > +maintainers:
> > +  - Flavio Suligoi <f.suligoi@xxxxxxx>
> > +
> > +description: |
> > +  The Monolithic Power (MPS) MP3309C is a WLED step-up converter,
> > +featuring a
> > +  programmable switching frequency to optimize efficiency.
> > +  It supports two different dimming modes:
> > +
> > +  - analog mode, via I2C commands, as default mode (32 dimming
> > + levels)
> > +  - PWM controlled mode (optional)
> > +
> > +  The datasheet is available at:
> > +  https://www.monolithicpower.com/en/mp3309c.html
> > +
> > +properties:
> > +  compatible:
> > +    const: mps,mp3309c
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  pwms:
> > +    description: if present, the backlight is controlled in PWM mode.
> > +    maxItems: 1
> > +
> > +  enable-gpios:
> > +    description: GPIO used to enable the backlight in "analog-i2c" dimming
> mode.
> > +    maxItems: 1
> > +
> > +  brightness-levels:
> > +    description:
> > +      Array of distinct brightness levels, in PWM dimming mode.
> > +      Typically these are in the range from 0 to 255, but any range starting
> > +      at 0 will do.
> > +      The 0 value means a 0% duty cycle (darkest/off), while the last value in
> > +      the array represents a 100% duty cycle (brightest).
> > +    $ref: /schemas/types.yaml#/definitions/uint32-array
> 
> This already has a type defined. Please add it to backlight/common.yaml and
> remove from led-backlight.yaml and pwm-backlight.yaml.

Ok, I'll add common.yaml and I'll prepare two other separate patches for these.

> 
> You say 0-255 here, but your example is 0-10. One of those seems wrong.
> Anyways, don't define constraints in prose, use a schema:
> 
> items:
>   maximum: 10 (or 255?)

Ok, I'll add maximum, and I'll change the example, using 0..255

> 
> > +
> > +  default-brightness:
> > +    description:
> > +      The default brightness (index into the levels array).
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> 
> Already has a type. You need to reference backlight/common.yaml.

Ok

> 
> > +
> > +  mps,overvoltage-protection-microvolt:
> > +    description: Overvoltage protection (13.5V, 24V or 35.5V).
> > +    enum: [ 13500000, 24000000, 35500000 ]
> > +    default: 35500000
> > +
> > +  mps,no-sync-mode:
> > +    description: disable synchronous rectification mode
> > +    type: boolean
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        /* Backlight with PWM control */
> > +        backlight_pwm: backlight@17 {
> > +            compatible = "mps,mp3309c";
> > +            reg = <0x17>;
> > +            pwms = <&pwm1 0 3333333 0>; /* 300 Hz --> (1/f) * 1*10^9 */
> > +            brightness-levels = <0 1 2 3 4 5 6 7 8 9 10>;
> > +            default-brightness = <8>;
> > +            mps,overvoltage-protection-microvolt = <24000000>;
> > +        };
> > +    };
> > --
> > 2.34.1
> >

Thanks,
Flavio