[PATCH v3 0/4] Add sc8280xp CCI and CAMSS core dtsi

[Bryan O'Donoghue]

V3:
- Expands description of ports to clarify mapping of port to CSIPHY
  Rob

- Adds the dependency link into the commit log of patch #3 - bod

V2:
- Drops specific sc8280xp-cci compat - Konrad
- Drops minItems where maxItems are equal - Krzysztof
- Uses suggested description for CAMSS - Krzysztof
- Leaves indentation of ports/properties - Rob
- NoISP. Supports bayer encoded upstream currently only - Krzysztof
- Endpoint. Adds an example endpoint - Krzysztof

Link next:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-23-10-10-sc8280xp-camss-v2

V1:
The sc8280xp provides a standard Camera Control Interface and Camera
SubSystem hardware interface similar to antecedent parts sdm845 and
sm8250.

Per the target segments for this part, sc8280xp has more of everything.
More CCI, VFE, CSIPHY and therefore more interrupt lines and clocks to
declare.

CCI x 4
CSIPHY x 4
VFE x 4
VFE Lite x 4
CSID x 4

Bootable 6.5.y x13s:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/lenovo-x13s-linux-6.5.y

Linux next:
https://git.codelinaro.org/bryan.odonoghue/kernel/-/tree/linux-next-23-10-06-sc8280xp-camss

This patch depends-on:
https://lore.kernel.org/lkml/20231004161853.86382-2-bryan.odonoghue@xxxxxxxxxx/T/

Bryan O'Donoghue (4):
  arm64: dts: qcom: sc8280xp: Add in CAMCC for sc8280xp
  arm64: dts: qcom: sc8280xp: camss: Add CCI definitions
  media: dt-bindings: media: camss: Add qcom,sc8280xp-camss binding
  arm64: dts: qcom: sc8280xp: camss: Add CAMSS block definition

 .../bindings/media/qcom,sc8280xp-camss.yaml   | 582 ++++++++++++++++
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi        | 624 ++++++++++++++++++
 2 files changed, 1206 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml

-- 
2.40.1