Re: [PATCH v2 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Anand Moon]

Hi Rob,

On Wed, 11 Oct 2023 at 12:01, Rob Herring <robh@xxxxxxxxxx> wrote:
>
>
> On Wed, 11 Oct 2023 10:41:48 +0530, Anand Moon wrote:
> > Add the binding example for the USB3.1 Genesys Logic GL3523
> > integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> > hub.
> >
> > Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
> > ---
> > New patch.
> > ---
> >  .../bindings/usb/genesys,gl850g.yaml          | 28 +++++++++++++++++--
> >  1 file changed, 25 insertions(+), 3 deletions(-)
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/usb-hcd.example.dtb: hub@1: 'reset-gpios' is a required property
>         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/usb-hcd.example.dtb: hub@1: 'vdd-supply' is a required property
>         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/usb-hcd.example.dtb: hub@1: 'peer-hub' is a required property
>         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/usb-device.example.dtb: hub@1: 'reset-gpios' is a required property
>         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/usb-device.example.dtb: hub@1: 'vdd-supply' is a required property
>         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/usb/usb-device.example.dtb: hub@1: 'peer-hub' is a required property
>         from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231011051152.133257-1-linux.amoon@xxxxxxxxx
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>

Can you share an example to add two examples in this binding?
one for usb5e3,608 and other for usb5e3,610, usb5e3,620,
I have tried but I got an error for duplicate

I have tried to modify it with the following example

+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: usb5e3,608
+    then:
+      properties:
+        reset-gpios: true
+        vdd-supply: false
+        peer-hub: false
+    else:
+      $ref: usb-device.yaml
+      required:
+        - peer-hub

but it still shows me his warning,

  DTC_CHK Documentation/devicetree/bindings/usb/usb-hcd.example.dtb
/home/amoon/mainline/linux-amlogic-6.y-devel/Documentation/devicetree/bindings/usb/usb-hcd.example.dtb:
hub@1: 'peer-hub' is a required property
        from schema $id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#

I could not find any binding which supports these properties.
  - reset-gpios
  - vdd-supply
  - peer-hub

Please suggest to me how to resolve this warning.

Thanks
-Anand