[PATCH v2 3/8] clk: qcom: apss-ipq-pll: Fix 'l' value for ipq5332_pll_config

[Varadarajan Narayanan]

The earlier 'l' value of 0x3e is for 1.5GHz. Not all SKUs support
this frequency. Hence set it to 0x2d to get 1.1GHz which is
supported in all SKUs.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Fixes: c7ef7fbb1ccf ("clk: qcom: apss-ipq-pll: add support for IPQ5332")
Signed-off-by: Kathiravan T <quic_kathirav@xxxxxxxxxxx>
Signed-off-by: Varadarajan Narayanan <quic_varada@xxxxxxxxxxx>
---
 drivers/clk/qcom/apss-ipq-pll.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index 18c4ffe..41279e5 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -74,7 +74,7 @@ static struct clk_alpha_pll ipq_pll_stromer_plus = {
 };
 
 static const struct alpha_pll_config ipq5332_pll_config = {
-	.l = 0x3e,
+	.l = 0x2d,
 	.config_ctl_val = 0x4001075b,
 	.config_ctl_hi_val = 0x304,
 	.main_output_mask = BIT(0),
-- 
2.7.4