[PATCH net-next v3 0/7] net: dsa: microchip: provide Wake on LAN support

[Oleksij Rempel]

changes v3:
- use ethernet address of DSA master instead from devicetree
- use dev_ops->wol* instead of list of supported switch
- don't shotdown the switch if WoL is enabled
- rework on top of latest HSR changes

changes v2:
- rebase against latest next

This series of patches provides Wake on LAN support for the KSZ9477
family of switches. It was tested on KSZ8565 Switch with PME pin
attached to an external PMIC.

The patch making WoL configuration persist on system shutdown will be
send separately, since it will potentially need more discussion.

Oleksij Rempel (7):
  net: dsa: microchip: Add missing MAC address register offset for
    ksz8863
  net: dsa: microchip: Set unique MAC at startup for WoL support
  net: dsa: microchip: ksz9477: add Wake on LAN support
  net: dsa: microchip: ksz9477: add Wake on PHY event support
  dt-bindings: net: dsa: microchip: add wakeup-source property
  net: dsa: microchip: use wakeup-source DT property to enable PME
    output
  net: dsa: microchip: do not shut down the switch if WoL is active

 .../bindings/net/dsa/microchip,ksz.yaml       |   2 +
 drivers/net/dsa/microchip/ksz9477.c           | 116 +++++++++++++++++
 drivers/net/dsa/microchip/ksz9477.h           |   4 +
 drivers/net/dsa/microchip/ksz9477_i2c.c       |   3 +
 drivers/net/dsa/microchip/ksz_common.c        | 117 ++++++++++++++++--
 drivers/net/dsa/microchip/ksz_common.h        |   7 ++
 drivers/net/dsa/microchip/ksz_spi.c           |   3 +
 7 files changed, 245 insertions(+), 7 deletions(-)

-- 
2.39.2