Re: [PATCH net-next v3 0/2] Switch DSA to inclusive terminology
From: Stephen Hemminger
Date: Fri Oct 13 2023 - 20:30:33 EST
On Fri, 13 Oct 2023 14:52:49 -0700
Florian Fainelli <florian.fainelli@xxxxxxxxxxxx> wrote:
> One of the action items following Netconf'23 is to switch subsystems to
> use inclusive terminology. DSA has been making extensive use of the
> "master" and "slave" words which are now replaced by "conduit" and
> "user" respectively.
>
> Changes in v3:
> - properly align arguments with the changed function names
> - ensure markup delimiters lengths are corrected to the name word length
> - maintain the existing wording about LAG devices
>
> Changes in v2:
>
> - addressed kbuild test robots reports
> - preserve capitalization where relevant
> - fixed build error in mtk_ppe_offload.c
>
> Florian Fainelli (2):
> net: dsa: Use conduit and user terms
> net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT
>
> .../bindings/net/dsa/mediatek,mt7530.yaml | 2 +-
> Documentation/networking/dsa/b53.rst | 14 +-
> Documentation/networking/dsa/bcm_sf2.rst | 2 +-
> .../networking/dsa/configuration.rst | 102 +-
> Documentation/networking/dsa/dsa.rst | 156 +-
> Documentation/networking/dsa/lan9303.rst | 2 +-
> Documentation/networking/dsa/sja1105.rst | 6 +-
> .../dts/marvell/armada-3720-espressobin.dtsi | 2 +-
> drivers/net/dsa/b53/b53_common.c | 4 +-
> drivers/net/dsa/b53/b53_mdio.c | 2 +-
> drivers/net/dsa/bcm_sf2.c | 36 +-
> drivers/net/dsa/bcm_sf2.h | 2 +-
> drivers/net/dsa/bcm_sf2_cfp.c | 4 +-
> drivers/net/dsa/lan9303-core.c | 4 +-
> drivers/net/dsa/lantiq_gswip.c | 34 +-
> drivers/net/dsa/microchip/ksz9477.c | 6 +-
> drivers/net/dsa/microchip/ksz_common.c | 20 +-
> drivers/net/dsa/microchip/ksz_ptp.c | 2 +-
> drivers/net/dsa/mt7530.c | 16 +-
> drivers/net/dsa/mv88e6xxx/chip.c | 2 +-
> drivers/net/dsa/ocelot/felix.c | 68 +-
> drivers/net/dsa/ocelot/felix.h | 6 +-
> drivers/net/dsa/qca/qca8k-8xxx.c | 50 +-
> drivers/net/dsa/qca/qca8k-common.c | 2 +-
> drivers/net/dsa/qca/qca8k-leds.c | 6 +-
> drivers/net/dsa/qca/qca8k.h | 2 +-
> drivers/net/dsa/realtek/realtek-smi.c | 28 +-
> drivers/net/dsa/realtek/realtek.h | 2 +-
> drivers/net/dsa/sja1105/sja1105_main.c | 4 +-
> drivers/net/dsa/xrs700x/xrs700x.c | 12 +-
> drivers/net/ethernet/broadcom/bcmsysport.c | 2 +-
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +-
> .../net/ethernet/mediatek/mtk_ppe_offload.c | 2 +-
> include/linux/dsa/sja1105.h | 2 +-
> include/net/dsa.h | 56 +-
> include/net/dsa_stubs.h | 22 +-
> include/uapi/linux/if_link.h | 4 +-
> net/core/dev_ioctl.c | 2 +-
> net/dsa/Makefile | 6 +-
> net/dsa/{master.c => conduit.c} | 118 +-
> net/dsa/conduit.h | 22 +
> net/dsa/dsa.c | 222 +--
> net/dsa/dsa.h | 12 +-
> net/dsa/master.h | 22 -
> net/dsa/netlink.c | 22 +-
> net/dsa/port.c | 124 +-
> net/dsa/port.h | 4 +-
> net/dsa/slave.h | 69 -
> net/dsa/switch.c | 18 +-
> net/dsa/switch.h | 4 +-
> net/dsa/tag.c | 10 +-
> net/dsa/tag.h | 26 +-
> net/dsa/tag_8021q.c | 22 +-
> net/dsa/tag_8021q.h | 2 +-
> net/dsa/tag_ar9331.c | 4 +-
> net/dsa/tag_brcm.c | 14 +-
> net/dsa/tag_dsa.c | 6 +-
> net/dsa/tag_gswip.c | 4 +-
> net/dsa/tag_hellcreek.c | 4 +-
> net/dsa/tag_ksz.c | 12 +-
> net/dsa/tag_lan9303.c | 4 +-
> net/dsa/tag_mtk.c | 4 +-
> net/dsa/tag_none.c | 6 +-
> net/dsa/tag_ocelot.c | 22 +-
> net/dsa/tag_ocelot_8021q.c | 12 +-
> net/dsa/tag_qca.c | 6 +-
> net/dsa/tag_rtl4_a.c | 6 +-
> net/dsa/tag_rtl8_4.c | 6 +-
> net/dsa/tag_rzn1_a5psw.c | 4 +-
> net/dsa/tag_sja1105.c | 30 +-
> net/dsa/tag_trailer.c | 4 +-
> net/dsa/tag_xrs700x.c | 4 +-
> net/dsa/{slave.c => user.c} | 1462 ++++++++---------
> net/dsa/user.h | 69 +
> 74 files changed, 1539 insertions(+), 1537 deletions(-)
> rename net/dsa/{master.c => conduit.c} (76%)
> create mode 100644 net/dsa/conduit.h
> delete mode 100644 net/dsa/master.h
> delete mode 100644 net/dsa/slave.h
> rename net/dsa/{slave.c => user.c} (62%)
> create mode 100644 net/dsa/user.h
After applying both patches, Ran script to check for non-inclusive naming.
net/dsa/conduit.c: if (netif_is_lag_master(dev))
net/dsa/conduit.c: if (netif_is_lag_master(dev))
net/dsa/conduit.c: if (!netif_is_lag_master(dev)) {
net/dsa/dsa.c: dsa_tree_notify(dst, DSA_NOTIFIER_MASTER_STATE_CHANGE, &info);
net/dsa/dsa.c: if (netif_is_lag_master(conduit))
net/dsa/dsa.c: if (netif_is_lag_master(conduit))
net/dsa/port.c: bridge_dev = netdev_master_upper_dev_get(lag_dev);
net/dsa/port.c: if (!bridge_dev || !netif_is_bridge_master(bridge_dev))
net/dsa/port.c: dp->cpu_port_in_lag = netif_is_lag_master(conduit);
net/dsa/switch.c: case DSA_NOTIFIER_MASTER_STATE_CHANGE:
net/dsa/switch.h: DSA_NOTIFIER_MASTER_STATE_CHANGE,
net/dsa/switch.h:/* DSA_NOTIFIER_MASTER_STATE_CHANGE */
net/dsa/user.c: if (netif_is_bridge_master(upper))
net/dsa/user.c: if (netif_is_bridge_master(info->upper_dev)) {
net/dsa/user.c: } else if (netif_is_lag_master(info->upper_dev)) {
net/dsa/user.c: } else if (is_hsr_master(info->upper_dev)) {
net/dsa/user.c: if (netif_is_bridge_master(info->upper_dev) && !info->linking)
net/dsa/user.c: else if (netif_is_lag_master(info->upper_dev) && !info->linking)
net/dsa/user.c: if (!netif_is_lag_master(dev))
net/dsa/user.c: if (!netif_is_lag_master(dev))
net/dsa/user.c: netif_is_bridge_master(info->upper_dev) && info->linking) {
net/dsa/user.c: if (netif_is_bridge_master(info->upper_dev))
net/dsa/user.c: if (netif_is_lag_master(info->upper_dev))
net/dsa/user.c: if (!netdev_uses_dsa(lag_dev) || !netif_is_lag_master(lag_dev))
net/dsa/user.c: if (!netif_is_bridge_master(br))
net/dsa/user.c: if (netif_is_lag_master(info->upper_dev)) {
net/dsa/user.c: if (netif_is_bridge_master(foreign_dev))
So most of the remaining problem is due to bridge and lag.
Still should change the NOTIFIER since it is not in public API.