Re: [PATCH] coresight: etm4x: Allow configuring cycle count threshold

[Suzuki K Poulose]

On 19/10/2023 09:23, Wei-Ning Huang wrote:
> Allow userspace to configure cycle count threshold through
> perf_event_attr config. The last high 12-bit of config value is used to
> store the cycle count threshold.

We have queued the support already in coreisght next tree,
patches posted here [0]

[0] - 
https://lore.kernel.org/r/20230921033631.1298723-1-anshuman.khandual@xxxxxxx

Suzuki

> Signed-off-by: Wei-Ning Huang <wnhuang@xxxxxxxxxx>
> ---
>   drivers/hwtracing/coresight/coresight-etm4x-core.c |  6 +++++-
>   include/linux/coresight-pmu.h                      | 14 ++++++++------
>   tools/include/linux/coresight-pmu.h                | 14 ++++++++------
>   3 files changed, 21 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/hwtracing/coresight/coresight-etm4x-core.c b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> index 77b0271ce6eb..155441668b4a 100644
> --- a/drivers/hwtracing/coresight/coresight-etm4x-core.c
> +++ b/drivers/hwtracing/coresight/coresight-etm4x-core.c
> @@ -645,6 +645,7 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
>   	struct perf_event_attr *attr = &event->attr;
>   	unsigned long cfg_hash;
>   	int preset;
> +	u64 cyc_threadhold;
>   
>   	/* Clear configuration from previous run */
>   	memset(config, 0, sizeof(struct etmv4_config));
> @@ -667,7 +668,10 @@ static int etm4_parse_event_config(struct coresight_device *csdev,
>   	if (attr->config & BIT(ETM_OPT_CYCACC)) {
>   		config->cfg |= TRCCONFIGR_CCI;
>   		/* TRM: Must program this for cycacc to work */
> -		config->ccctlr = ETM_CYC_THRESHOLD_DEFAULT;
> +		cyc_threshold = ((attr->config >> ETM_OPT_CYC_THRESHOLD_SHIFT) &
> +				 ETM_OPT_CYC_THRESHOLD_MASK;
> +		config->ccctlr = cyc_threshold ? cyc_threshold :
> +				 ETM_CYC_THRESHOLD_DEFAULT;
>   	}
>   	if (attr->config & BIT(ETM_OPT_TS)) {
>   		/*
> diff --git a/include/linux/coresight-pmu.h b/include/linux/coresight-pmu.h
> index 51ac441a37c3..14f48658ff1c 100644
> --- a/include/linux/coresight-pmu.h
> +++ b/include/linux/coresight-pmu.h
> @@ -29,12 +29,14 @@
>    * ETMv3.5/PTM doesn't define ETMCR config bits with prefix "ETM3_" and
>    * directly use below macros as config bits.
>    */
> -#define ETM_OPT_BRANCH_BROADCAST 8
> -#define ETM_OPT_CYCACC		12
> -#define ETM_OPT_CTXTID		14
> -#define ETM_OPT_CTXTID2		15
> -#define ETM_OPT_TS		28
> -#define ETM_OPT_RETSTK		29
> +#define ETM_OPT_BRANCH_BROADCAST	8
> +#define ETM_OPT_CYCACC			12
> +#define ETM_OPT_CTXTID			14
> +#define ETM_OPT_CTXTID2			15
> +#define ETM_OPT_TS			28
> +#define ETM_OPT_RETSTK			29
> +#define ETM_OPT_CYC_THRESHOLD_SHIFT	52
> +#define ETM_OPT_CYC_THRESHOLD_MASK	0xfff
>   
>   /* ETMv4 CONFIGR programming bits for the ETM OPTs */
>   #define ETM4_CFG_BIT_BB         3
> diff --git a/tools/include/linux/coresight-pmu.h b/tools/include/linux/coresight-pmu.h
> index 51ac441a37c3..14f48658ff1c 100644
> --- a/tools/include/linux/coresight-pmu.h
> +++ b/tools/include/linux/coresight-pmu.h
> @@ -29,12 +29,14 @@
>    * ETMv3.5/PTM doesn't define ETMCR config bits with prefix "ETM3_" and
>    * directly use below macros as config bits.
>    */
> -#define ETM_OPT_BRANCH_BROADCAST 8
> -#define ETM_OPT_CYCACC		12
> -#define ETM_OPT_CTXTID		14
> -#define ETM_OPT_CTXTID2		15
> -#define ETM_OPT_TS		28
> -#define ETM_OPT_RETSTK		29
> +#define ETM_OPT_BRANCH_BROADCAST	8
> +#define ETM_OPT_CYCACC			12
> +#define ETM_OPT_CTXTID			14
> +#define ETM_OPT_CTXTID2			15
> +#define ETM_OPT_TS			28
> +#define ETM_OPT_RETSTK			29
> +#define ETM_OPT_CYC_THRESHOLD_SHIFT	52
> +#define ETM_OPT_CYC_THRESHOLD_MASK	0xfff
>   
>   /* ETMv4 CONFIGR programming bits for the ETM OPTs */
>   #define ETM4_CFG_BIT_BB         3