[AMD Official Use Only - General]
Hi Kozlowski,
-----Original Message-----[Kundanala, Praveen Teja] Okay
From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Sent: Thursday, October 19, 2023 2:58 PM
To: Kundanala, Praveen Teja <praveen.teja.kundanala@xxxxxxx>;
srinivas.kandagatla@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
krzysztof.kozlowski+dt@xxxxxxxxxx; conor+dt@xxxxxxxxxx; Simek, Michal
<michal.simek@xxxxxxx>; Kundanala, Praveen Teja
<praveen.teja.kundanala@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-arm-
kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Subject: Re: [PATCH V2 3/5] arm64: zynqmp: Add ZynqnMP nvmem nodes
Caution: This message originated from an External Source. Use proper caution
when opening attachments, clicking links, or responding.
On 19/10/2023 08:06, Praveen Teja Kundanala wrote:
Add nvmem DT nodes for ZynqMP SOC
Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@xxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 59
+++++++++++++++++++++++++-
1 file changed, 57 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index b61fc99cd911..b7433e6b9d6c 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -194,14 +194,69 @@ zynqmp_power: zynqmp-power {
mbox-names = "tx", "rx";
};
- nvmem_firmware {
+ nvmem-firmware {
Node names should be generic. See also an explanation and list of examples
(not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-
basics.html#generic-names-recommendation
[Kundanala, Praveen Teja] Missed it, Will run and send V3.
compatible = "xlnx,zynqmp-nvmem-fw";
It does not look like you tested the DTS against bindings. Please run `make
dtbs_check W=1` (see Documentation/devicetree/bindings/writing-schema.rst
or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-
sources-with-the-devicetree-schema/
for instructions).
[Kundanala, Praveen Teja] Took base on Srinivas for-next repo and Michal's changes were not reflected in that repo.
#address-cells = <1>;
#size-cells = <1>;
- soc_revision: soc_revision@0 {
+ soc_revision: soc-revision@0 {
reg = <0x0 0x4>;
};
Wasn't this fixed already by Michal?