Re: [PATCH v4 3/4] mfd: cs40l50: Add support for CS40L50 core driver

[Lee Jones]

On Fri, 20 Oct 2023, James Ogletree wrote:

> 
> Thank you for your thorough review. Anything not replied to below will be
> incorporated in the next version.
> 
> >> +/*
> >> + * CS40L50 Advanced Haptic Driver with waveform memory,
> > 
> > s/Driver/device/
> 
> CS40L50 is a “haptic driver”, like a "motor driver" in a car. It is an
> unfortunate name in this context, but it is straight from the datasheet.

Understood.  That's fine then.

> >> +static const struct mfd_cell cs40l50_devs[] = {
> >> + {
> >> + .name = "cs40l50-vibra",
> >> + },
> > 
> > 
> > Where are the other devices?  Without them, it's not an MFD.
> 
> The driver will need to support I2S streaming to the device at some point
> in the future, for which a codec driver will be added. I thought it better to
> submit this as an MFD driver now, rather than as an Input driver, so as
> not to have to move everything later.
> 
> Should I add the “cs40l50-codec” mfd_cell now, even though it does not
> exist yet?

What is your timeline for this to be authored?

Does the device function well without it?

> >> +static int cs40l50_handle_redc_est_done(struct cs40l50_private *cs40l50)
> >> +{
> >> + int error, fractional, integer, stored;
> > 
> > err or ret is traditional.
> 
> We received feedback to change from “ret” to “error” in the input
> subsystem, and now the opposite in MFD. I have no problem adopting
> “err” here, but is it understood that styles will be mixed across
> components?

That surprises me:

% git grep "int .*error" | wc -l
6152

vs

% git grep "int .*err" | grep -v error | wc -l
34753
% git grep "int .*ret" | wc -l  
76584

> >> +static irqreturn_t cs40l50_process_mbox(int irq, void *data)
> >> +{
> >> + struct cs40l50_private *cs40l50 = data;
> >> + int error = 0;
> >> + u32 val;
> >> +
> >> + mutex_lock(&cs40l50->lock);
> >> +
> >> + while (!cs40l50_mailbox_read_next(cs40l50, &val)) {
> >> + switch (val) {
> >> + case 0:
> >> + mutex_unlock(&cs40l50->lock);
> >> + dev_dbg(cs40l50->dev, "Reached end of queue\n");
> >> + return IRQ_HANDLED;
> >> + case CS40L50_MBOX_HAPTIC_TRIGGER_GPIO:
> >> + dev_dbg(cs40l50->dev, "Mailbox: TRIGGER_GPIO\n");
> > 
> > These all appear to be no-ops?
> 
> Correct.

Then why do the exist?

> >> + case CS40L50_MBOX_RUNTIME_SHORT:
> >> + dev_err(cs40l50->dev, "Runtime short detected\n");
> >> + error = cs40l50_error_release(cs40l50);
> >> + if (error)
> >> + goto out_mutex;
> >> + break;
> >> + default:
> >> + dev_err(cs40l50->dev, "Payload %#X not recognized\n", val);
> >> + error = -EINVAL;
> >> + goto out_mutex;
> >> + }
> >> + }
> >> +
> >> + error = -EIO;
> >> +
> >> +out_mutex:
> >> + mutex_unlock(&cs40l50->lock);
> >> +
> >> + return IRQ_RETVAL(!error);
> >> +}
> > 
> > Should the last two drivers live in drivers/mailbox?
> 
> Adopting the mailbox framework seems like an excessive amount
> of overhead for our requirements.

MFD isn't a dumping a ground for miscellaneous functionality.

MFD requests resources and registers devices.

Mailbox functionality should live in drivers/mailbox.

> >> +static irqreturn_t cs40l50_error(int irq, void *data);
> > 
> > Why is this being forward declared?
> > 
> >> +static const struct cs40l50_irq cs40l50_irqs[] = {
> >> + CS40L50_IRQ(AMP_SHORT, "Amp short", error),
> > 
> > I assume that last parameter is half of a function name.
> > 
> > Better to have 2 different structures and do 2 requests I feel.
> 
> I think I will combine the two handler functions into one, so as not
> to need the struct handler parameter, or the forward declaration.

Or the MACRO - win, win win.

> >> +{
> >> + struct device *dev = cs40l50->dev;
> >> + int error;
> >> +
> >> + mutex_init(&cs40l50->lock);
> > 
> > Don't you need to destroy this in the error path?
> 
> My understanding based on past feedback is that mutex_destroy()
> is an empty function unless mutex debugging is enabled, and there
> is no need cleanup the mutex explicitly. I will change this if you
> disagree with that feedback.

It just seems odd to create something and not tear it down.

> >> +struct cs40l50_irq {
> >> + const char *name;
> >> + int irq;
> >> + irqreturn_t (*handler)(int irq, void *data);
> >> +};
> >> +
> >> +struct cs40l50_private {
> >> + struct device *dev;
> >> + struct regmap *regmap;
> >> + struct cs_dsp dsp;
> >> + struct mutex lock;
> >> + struct gpio_desc *reset_gpio;
> >> + struct regmap_irq_chip_data *irq_data;
> >> + struct input_dev *input;
> > 
> > Where is this used?
> > 
> >> + const struct firmware *wmfw;
> > 
> > Or this.
> > 
> >> + struct cs_hap haptics;
> > 
> > Or this?
> > 
> >> + u32 devid;
> >> + u32 revid;
> > 
> > Are these used after they're set?
> 
> These are all used in the input driver, patch 4/4 of this series. If
> this is not acceptable in some way, I will change it per your
> suggestions.

Do they need to be shared with other devices?

If not, they should live where they are used.

-- 
Lee Jones [李琼斯]