[PATCH 07/10] wifi: remove orphaned ray_cs driver
From: Arnd Bergmann
Date: Mon Oct 23 2023 - 09:22:19 EST
From: Arnd Bergmann <arnd@xxxxxxxx>
Aviator/Raytheon is an early PCMCIA driver, apparently predating 802.11b
and only supporting wireless extensions.
The driver has been orphaned since 2010 and only seen cosmetic updates
long before than. Jean Tourrilhes pointed out in a 2005 changelog that
he tested a change on actual hardware, which was apparently already
noteworthy back then.
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
.../networking/device_drivers/wifi/index.rst | 1 -
.../networking/device_drivers/wifi/ray_cs.rst | 165 -
MAINTAINERS | 5 -
drivers/net/wireless/legacy/Kconfig | 16 -
drivers/net/wireless/legacy/Makefile | 1 -
drivers/net/wireless/legacy/ray_cs.c | 2824 -----------------
drivers/net/wireless/legacy/ray_cs.h | 74 -
drivers/net/wireless/legacy/rayctl.h | 734 -----
8 files changed, 3820 deletions(-)
delete mode 100644 Documentation/networking/device_drivers/wifi/ray_cs.rst
delete mode 100644 drivers/net/wireless/legacy/ray_cs.c
delete mode 100644 drivers/net/wireless/legacy/ray_cs.h
delete mode 100644 drivers/net/wireless/legacy/rayctl.h
diff --git a/Documentation/networking/device_drivers/wifi/index.rst b/Documentation/networking/device_drivers/wifi/index.rst
index bf91a87c7acff..fb394f5de4a94 100644
--- a/Documentation/networking/device_drivers/wifi/index.rst
+++ b/Documentation/networking/device_drivers/wifi/index.rst
@@ -10,7 +10,6 @@ Contents:
intel/ipw2100
intel/ipw2200
- ray_cs
.. only:: subproject and html
diff --git a/Documentation/networking/device_drivers/wifi/ray_cs.rst b/Documentation/networking/device_drivers/wifi/ray_cs.rst
deleted file mode 100644
index 9a46d1ae8f209..0000000000000
--- a/Documentation/networking/device_drivers/wifi/ray_cs.rst
+++ /dev/null
@@ -1,165 +0,0 @@
-.. SPDX-License-Identifier: GPL-2.0
-
-.. include:: <isonum.txt>
-
-=========================
-Raylink wireless LAN card
-=========================
-
-September 21, 1999
-
-Copyright |copy| 1998 Corey Thomas (corey@xxxxxxxxxxxxx)
-
-This file is the documentation for the Raylink Wireless LAN card driver for
-Linux. The Raylink wireless LAN card is a PCMCIA card which provides IEEE
-802.11 compatible wireless network connectivity at 1 and 2 megabits/second.
-See http://www.raytheon.com/micro/raylink/ for more information on the Raylink
-card. This driver is in early development and does have bugs. See the known
-bugs and limitations at the end of this document for more information.
-This driver also works with WebGear's Aviator 2.4 and Aviator Pro
-wireless LAN cards.
-
-As of kernel 2.3.18, the ray_cs driver is part of the Linux kernel
-source. My web page for the development of ray_cs is at
-http://web.ralinktech.com/ralink/Home/Support/Linux.html
-and I can be emailed at corey@xxxxxxxxxxxxx
-
-The kernel driver is based on ray_cs-1.62.tgz
-
-The driver at my web page is intended to be used as an add on to
-David Hinds pcmcia package. All the command line parameters are
-available when compiled as a module. When built into the kernel, only
-the essid= string parameter is available via the kernel command line.
-This will change after the method of sorting out parameters for all
-the PCMCIA drivers is agreed upon. If you must have a built in driver
-with nondefault parameters, they can be edited in
-/usr/src/linux/drivers/net/pcmcia/ray_cs.c. Searching for module_param
-will find them all.
-
-Information on card services is available at:
-
- http://pcmcia-cs.sourceforge.net/
-
-
-Card services user programs are still required for PCMCIA devices.
-pcmcia-cs-3.1.1 or greater is required for the kernel version of
-the driver.
-
-Currently, ray_cs is not part of David Hinds card services package,
-so the following magic is required.
-
-At the end of the /etc/pcmcia/config.opts file, add the line:
-source ./ray_cs.opts
-This will make card services read the ray_cs.opts file
-when starting. Create the file /etc/pcmcia/ray_cs.opts containing the
-following::
-
- #### start of /etc/pcmcia/ray_cs.opts ###################
- # Configuration options for Raylink Wireless LAN PCMCIA card
- device "ray_cs"
- class "network" module "misc/ray_cs"
-
- card "RayLink PC Card WLAN Adapter"
- manfid 0x01a6, 0x0000
- bind "ray_cs"
-
- module "misc/ray_cs" opts ""
- #### end of /etc/pcmcia/ray_cs.opts #####################
-
-
-To join an existing network with
-different parameters, contact the network administrator for the
-configuration information, and edit /etc/pcmcia/ray_cs.opts.
-Add the parameters below between the empty quotes.
-
-Parameters for ray_cs driver which may be specified in ray_cs.opts:
-
-=============== =============== =============================================
-bc integer 0 = normal mode (802.11 timing),
- 1 = slow down inter frame timing to allow
- operation with older breezecom access
- points.
-
-beacon_period integer beacon period in Kilo-microseconds,
-
- legal values = must be integer multiple
- of hop dwell
-
- default = 256
-
-country integer 1 = USA (default),
- 2 = Europe,
- 3 = Japan,
- 4 = Korea,
- 5 = Spain,
- 6 = France,
- 7 = Israel,
- 8 = Australia
-
-essid string ESS ID - network name to join
-
- string with maximum length of 32 chars
- default value = "ADHOC_ESSID"
-
-hop_dwell integer hop dwell time in Kilo-microseconds
-
- legal values = 16,32,64,128(default),256
-
-irq_mask integer linux standard 16 bit value 1bit/IRQ
-
- lsb is IRQ 0, bit 1 is IRQ 1 etc.
- Used to restrict choice of IRQ's to use.
- Recommended method for controlling
- interrupts is in /etc/pcmcia/config.opts
-
-net_type integer 0 (default) = adhoc network,
- 1 = infrastructure
-
-phy_addr string string containing new MAC address in
- hex, must start with x eg
- x00008f123456
-
-psm integer 0 = continuously active,
- 1 = power save mode (not useful yet)
-
-pc_debug integer (0-5) larger values for more verbose
- logging. Replaces ray_debug.
-
-ray_debug integer Replaced with pc_debug
-
-ray_mem_speed integer defaults to 500
-
-sniffer integer 0 = not sniffer (default),
- 1 = sniffer which can be used to record all
- network traffic using tcpdump or similar,
- but no normal network use is allowed.
-
-translate integer 0 = no translation (encapsulate frames),
- 1 = translation (RFC1042/802.1)
-=============== =============== =============================================
-
-More on sniffer mode:
-
-tcpdump does not understand 802.11 headers, so it can't
-interpret the contents, but it can record to a file. This is only
-useful for debugging 802.11 lowlevel protocols that are not visible to
-linux. If you want to watch ftp xfers, or do similar things, you
-don't need to use sniffer mode. Also, some packet types are never
-sent up by the card, so you will never see them (ack, rts, cts, probe
-etc.) There is a simple program (showcap) included in the ray_cs
-package which parses the 802.11 headers.
-
-Known Problems and missing features
-
- Does not work with non x86
-
- Does not work with SMP
-
- Support for defragmenting frames is not yet debugged, and in
- fact is known to not work. I have never encountered a net set
- up to fragment, but still, it should be fixed.
-
- The ioctl support is incomplete. The hardware address cannot be set
- using ifconfig yet. If a different hardware address is needed, it may
- be set using the phy_addr parameter in ray_cs.opts. This requires
- a card insertion to take effect.
diff --git a/MAINTAINERS b/MAINTAINERS
index e5c669d9bca00..3123c955bb7f5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17947,11 +17947,6 @@ F: drivers/ras/
F: include/linux/ras.h
F: include/ras/ras_event.h
-RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-L: linux-wireless@xxxxxxxxxxxxxxx
-S: Orphan
-F: drivers/net/wireless/legacy/ray*
-
RC-CORE / LIRC FRAMEWORK
M: Sean Young <sean@xxxxxxxx>
L: linux-media@xxxxxxxxxxxxxxx
diff --git a/drivers/net/wireless/legacy/Kconfig b/drivers/net/wireless/legacy/Kconfig
index 3a5275941212d..1d77d53d64409 100644
--- a/drivers/net/wireless/legacy/Kconfig
+++ b/drivers/net/wireless/legacy/Kconfig
@@ -1,19 +1,3 @@
-config PCMCIA_RAYCS
- tristate "Aviator/Raytheon 2.4GHz wireless support"
- depends on PCMCIA
- select WIRELESS_EXT
- select WEXT_SPY
- select WEXT_PRIV
- help
- Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
- (PC-card) wireless Ethernet networking card to your computer.
- Please read the file
- <file:Documentation/networking/device_drivers/wifi/ray_cs.rst> for
- details.
-
- To compile this driver as a module, choose M here: the module will be
- called ray_cs. If unsure, say N.
-
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
depends on CFG80211 && PCMCIA
diff --git a/drivers/net/wireless/legacy/Makefile b/drivers/net/wireless/legacy/Makefile
index 36878f080bfc5..d8705ccc5cf5d 100644
--- a/drivers/net/wireless/legacy/Makefile
+++ b/drivers/net/wireless/legacy/Makefile
@@ -1,5 +1,4 @@
# 16-bit wireless PCMCIA client drivers
-obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
obj-$(CONFIG_USB_NET_RNDIS_WLAN) += rndis_wlan.o
diff --git a/drivers/net/wireless/legacy/ray_cs.c b/drivers/net/wireless/legacy/ray_cs.c
deleted file mode 100644
index 8ace797ce951c..0000000000000
--- a/drivers/net/wireless/legacy/ray_cs.c
+++ /dev/null
@@ -1,2824 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*=============================================================================
- *
- * A PCMCIA client driver for the Raylink wireless LAN card.
- * The starting point for this module was the skeleton.c in the
- * PCMCIA 2.9.12 package written by David Hinds, dahinds@xxxxxxxxxxxxxxxxxxxxx
- *
- * Copyright (c) 1998 Corey Thomas (corey@xxxxxxxxxxxxx)
- *
- * Changes:
- * Arnaldo Carvalho de Melo <acme@xxxxxxxxxxxxxxxx> - 08/08/2000
- * - reorganize kmallocs in ray_attach, checking all for failure
- * and releasing the previous allocations if one fails
- *
- * Daniele Bellucci <bellucda@xxxxxxxxxx> - 07/10/2003
- * - Audit copy_to_user in ioctl(SIOCGIWESSID)
- *
-=============================================================================*/
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/proc_fs.h>
-#include <linux/ptrace.h>
-#include <linux/seq_file.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/skbuff.h>
-#include <linux/ieee80211.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#include <linux/wireless.h>
-#include <net/iw_handler.h>
-
-#include <asm/io.h>
-#include <asm/byteorder.h>
-#include <linux/uaccess.h>
-
-/* Warning : these stuff will slow down the driver... */
-#define WIRELESS_SPY /* Enable spying addresses */
-/* Definitions we need for spy */
-typedef struct iw_statistics iw_stats;
-typedef u_char mac_addr[ETH_ALEN]; /* Hardware address */
-
-#include "rayctl.h"
-#include "ray_cs.h"
-
-
-/** Prototypes based on PCMCIA skeleton driver *******************************/
-static int ray_config(struct pcmcia_device *link);
-static void ray_release(struct pcmcia_device *link);
-static void ray_detach(struct pcmcia_device *p_dev);
-
-/***** Prototypes indicated by device structure ******************************/
-static int ray_dev_close(struct net_device *dev);
-static int ray_dev_config(struct net_device *dev, struct ifmap *map);
-static struct net_device_stats *ray_get_stats(struct net_device *dev);
-static int ray_dev_init(struct net_device *dev);
-
-static int ray_open(struct net_device *dev);
-static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void ray_update_multi_list(struct net_device *dev, int all);
-static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
- unsigned char *data, int len);
-static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx,
- UCHAR msg_type, unsigned char *data);
-static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len);
-static iw_stats *ray_get_wireless_stats(struct net_device *dev);
-static const struct iw_handler_def ray_handler_def;
-
-/***** Prototypes for raylink functions **************************************/
-static void authenticate(ray_dev_t *local);
-static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type);
-static void authenticate_timeout(struct timer_list *t);
-static int get_free_ccs(ray_dev_t *local);
-static int get_free_tx_ccs(ray_dev_t *local);
-static void init_startup_params(ray_dev_t *local);
-static int parse_addr(char *in_str, UCHAR *out);
-static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev, UCHAR type);
-static int ray_init(struct net_device *dev);
-static int interrupt_ecf(ray_dev_t *local, int ccs);
-static void ray_reset(struct net_device *dev);
-static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len);
-static void verify_dl_startup(struct timer_list *t);
-
-/* Prototypes for interrpt time functions **********************************/
-static irqreturn_t ray_interrupt(int reg, void *dev_id);
-static void clear_interrupt(ray_dev_t *local);
-static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
- unsigned int pkt_addr, int rx_len);
-static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr, int len);
-static void ray_rx(struct net_device *dev, ray_dev_t *local, struct rcs __iomem *prcs);
-static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs);
-static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
- unsigned int pkt_addr, int rx_len);
-static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
- unsigned int pkt_addr, int rx_len);
-static void associate(ray_dev_t *local);
-
-/* Card command functions */
-static int dl_startup_params(struct net_device *dev);
-static void join_net(struct timer_list *t);
-static void start_net(struct timer_list *t);
-
-/*===========================================================================*/
-/* Parameters that can be set with 'insmod' */
-
-/* ADHOC=0, Infrastructure=1 */
-static int net_type = ADHOC;
-
-/* Hop dwell time in Kus (1024 us units defined by 802.11) */
-static int hop_dwell = 128;
-
-/* Beacon period in Kus */
-static int beacon_period = 256;
-
-/* power save mode (0 = off, 1 = save power) */
-static int psm;
-
-/* String for network's Extended Service Set ID. 32 Characters max */
-static char *essid;
-
-/* Default to encapsulation unless translation requested */
-static bool translate = true;
-
-static int country = USA;
-
-static int sniffer;
-
-static int bc;
-
-/* 48 bit physical card address if overriding card's real physical
- * address is required. Since IEEE 802.11 addresses are 48 bits
- * like ethernet, an int can't be used, so a string is used. To
- * allow use of addresses starting with a decimal digit, the first
- * character must be a letter and will be ignored. This letter is
- * followed by up to 12 hex digits which are the address. If less
- * than 12 digits are used, the address will be left filled with 0's.
- * Note that bit 0 of the first byte is the broadcast bit, and evil
- * things will happen if it is not 0 in a card address.
- */
-static char *phy_addr = NULL;
-
-static unsigned int ray_mem_speed = 500;
-
-/* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */
-static struct pcmcia_device *this_device = NULL;
-
-MODULE_AUTHOR("Corey Thomas <corey@xxxxxxxxxxxxx>");
-MODULE_DESCRIPTION("Raylink/WebGear wireless LAN driver");
-MODULE_LICENSE("GPL");
-
-module_param(net_type, int, 0);
-module_param(hop_dwell, int, 0);
-module_param(beacon_period, int, 0);
-module_param(psm, int, 0);
-module_param(essid, charp, 0);
-module_param(translate, bool, 0);
-module_param(country, int, 0);
-module_param(sniffer, int, 0);
-module_param(bc, int, 0);
-module_param(phy_addr, charp, 0);
-module_param(ray_mem_speed, int, 0);
-
-static const UCHAR b5_default_startup_parms[] = {
- 0, 0, /* Adhoc station */
- 'L', 'I', 'N', 'U', 'X', 0, 0, 0, /* 32 char ESSID */
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, /* Active scan, CA Mode */
- 0, 0, 0, 0, 0, 0, /* No default MAC addr */
- 0x7f, 0xff, /* Frag threshold */
- 0x00, 0x80, /* Hop time 128 Kus */
- 0x01, 0x00, /* Beacon period 256 Kus */
- 0x01, 0x07, 0xa3, /* DTIM, retries, ack timeout */
- 0x1d, 0x82, 0x4e, /* SIFS, DIFS, PIFS */
- 0x7f, 0xff, /* RTS threshold */
- 0x04, 0xe2, 0x38, 0xA4, /* scan_dwell, max_scan_dwell */
- 0x05, /* assoc resp timeout thresh */
- 0x08, 0x02, 0x08, /* adhoc, infra, super cycle max */
- 0, /* Promiscuous mode */
- 0x0c, 0x0bd, /* Unique word */
- 0x32, /* Slot time */
- 0xff, 0xff, /* roam-low snr, low snr count */
- 0x05, 0xff, /* Infra, adhoc missed bcn thresh */
- 0x01, 0x0b, 0x4f, /* USA, hop pattern, hop pat length */
-/* b4 - b5 differences start here */
- 0x00, 0x3f, /* CW max */
- 0x00, 0x0f, /* CW min */
- 0x04, 0x08, /* Noise gain, limit offset */
- 0x28, 0x28, /* det rssi, med busy offsets */
- 7, /* det sync thresh */
- 0, 2, 2, /* test mode, min, max */
- 0, /* allow broadcast SSID probe resp */
- 0, 0, /* privacy must start, can join */
- 2, 0, 0, 0, 0, 0, 0, 0 /* basic rate set */
-};
-
-static const UCHAR b4_default_startup_parms[] = {
- 0, 0, /* Adhoc station */
- 'L', 'I', 'N', 'U', 'X', 0, 0, 0, /* 32 char ESSID */
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 0, /* Active scan, CA Mode */
- 0, 0, 0, 0, 0, 0, /* No default MAC addr */
- 0x7f, 0xff, /* Frag threshold */
- 0x02, 0x00, /* Hop time */
- 0x00, 0x01, /* Beacon period */
- 0x01, 0x07, 0xa3, /* DTIM, retries, ack timeout */
- 0x1d, 0x82, 0xce, /* SIFS, DIFS, PIFS */
- 0x7f, 0xff, /* RTS threshold */
- 0xfb, 0x1e, 0xc7, 0x5c, /* scan_dwell, max_scan_dwell */
- 0x05, /* assoc resp timeout thresh */
- 0x04, 0x02, 0x4, /* adhoc, infra, super cycle max */
- 0, /* Promiscuous mode */
- 0x0c, 0x0bd, /* Unique word */
- 0x4e, /* Slot time (TBD seems wrong) */
- 0xff, 0xff, /* roam-low snr, low snr count */
- 0x05, 0xff, /* Infra, adhoc missed bcn thresh */
- 0x01, 0x0b, 0x4e, /* USA, hop pattern, hop pat length */
-/* b4 - b5 differences start here */
- 0x3f, 0x0f, /* CW max, min */
- 0x04, 0x08, /* Noise gain, limit offset */
- 0x28, 0x28, /* det rssi, med busy offsets */
- 7, /* det sync thresh */
- 0, 2, 2, /* test mode, min, max */
- 0, /* rx/tx delay */
- 0, 0, 0, 0, 0, 0, /* current BSS id */
- 0 /* hop set */
-};
-
-/*===========================================================================*/
-static const u8 eth2_llc[] = { 0xaa, 0xaa, 3, 0, 0, 0 };
-
-static const char hop_pattern_length[] = { 1,
- USA_HOP_MOD, EUROPE_HOP_MOD,
- JAPAN_HOP_MOD, KOREA_HOP_MOD,
- SPAIN_HOP_MOD, FRANCE_HOP_MOD,
- ISRAEL_HOP_MOD, AUSTRALIA_HOP_MOD,
- JAPAN_TEST_HOP_MOD
-};
-
-static const char rcsid[] =
- "Raylink/WebGear wireless LAN - Corey <Thomas corey@xxxxxxxxxxxxx>";
-
-static const struct net_device_ops ray_netdev_ops = {
- .ndo_init = ray_dev_init,
- .ndo_open = ray_open,
- .ndo_stop = ray_dev_close,
- .ndo_start_xmit = ray_dev_start_xmit,
- .ndo_set_config = ray_dev_config,
- .ndo_get_stats = ray_get_stats,
- .ndo_set_rx_mode = set_multicast_list,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int ray_probe(struct pcmcia_device *p_dev)
-{
- ray_dev_t *local;
- struct net_device *dev;
- int ret;
-
- dev_dbg(&p_dev->dev, "ray_attach()\n");
-
- /* Allocate space for private device-specific data */
- dev = alloc_etherdev(sizeof(ray_dev_t));
- if (!dev)
- return -ENOMEM;
-
- local = netdev_priv(dev);
- local->finder = p_dev;
-
- /* The io structure describes IO port mapping. None used here */
- p_dev->resource[0]->end = 0;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-
- /* General socket configuration */
- p_dev->config_flags |= CONF_ENABLE_IRQ;
- p_dev->config_index = 1;
-
- p_dev->priv = dev;
-
- local->finder = p_dev;
- local->card_status = CARD_INSERTED;
- local->authentication_state = UNAUTHENTICATED;
- local->num_multi = 0;
- dev_dbg(&p_dev->dev, "ray_attach p_dev = %p, dev = %p, local = %p, intr = %p\n",
- p_dev, dev, local, &ray_interrupt);
-
- /* Raylink entries in the device structure */
- dev->netdev_ops = &ray_netdev_ops;
- dev->wireless_handlers = &ray_handler_def;
-#ifdef WIRELESS_SPY
- local->wireless_data.spy_data = &local->spy_data;
- dev->wireless_data = &local->wireless_data;
-#endif /* WIRELESS_SPY */
-
-
- dev_dbg(&p_dev->dev, "ray_cs ray_attach calling ether_setup.)\n");
- netif_stop_queue(dev);
-
- timer_setup(&local->timer, NULL, 0);
-
- this_device = p_dev;
- ret = ray_config(p_dev);
- if (ret)
- goto err_free_dev;
-
- return 0;
-
-err_free_dev:
- free_netdev(dev);
- return ret;
-}
-
-static void ray_detach(struct pcmcia_device *link)
-{
- struct net_device *dev;
-
- dev_dbg(&link->dev, "ray_detach\n");
-
- this_device = NULL;
- dev = link->priv;
-
- ray_release(link);
-
- if (link->priv) {
- unregister_netdev(dev);
- free_netdev(dev);
- }
- dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
-} /* ray_detach */
-
-#define MAX_TUPLE_SIZE 128
-static int ray_config(struct pcmcia_device *link)
-{
- int ret = 0;
- int i;
- struct net_device *dev = (struct net_device *)link->priv;
- ray_dev_t *local = netdev_priv(dev);
-
- dev_dbg(&link->dev, "ray_config\n");
-
- /* Determine card type and firmware version */
- printk(KERN_INFO "ray_cs Detected: %s%s%s%s\n",
- link->prod_id[0] ? link->prod_id[0] : " ",
- link->prod_id[1] ? link->prod_id[1] : " ",
- link->prod_id[2] ? link->prod_id[2] : " ",
- link->prod_id[3] ? link->prod_id[3] : " ");
-
- /* Now allocate an interrupt line. Note that this does not
- actually assign a handler to the interrupt.
- */
- ret = pcmcia_request_irq(link, ray_interrupt);
- if (ret)
- goto failed;
- dev->irq = link->irq;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
-/*** Set up 32k window for shared memory (transmit and control) ************/
- link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
- link->resource[2]->start = 0;
- link->resource[2]->end = 0x8000;
- ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed);
- if (ret)
- goto failed;
- ret = pcmcia_map_mem_page(link, link->resource[2], 0);
- if (ret)
- goto failed;
- local->sram = ioremap(link->resource[2]->start,
- resource_size(link->resource[2]));
- if (!local->sram)
- goto failed;
-
-/*** Set up 16k window for shared memory (receive buffer) ***************/
- link->resource[3]->flags |=
- WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
- link->resource[3]->start = 0;
- link->resource[3]->end = 0x4000;
- ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed);
- if (ret)
- goto failed;
- ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000);
- if (ret)
- goto failed;
- local->rmem = ioremap(link->resource[3]->start,
- resource_size(link->resource[3]));
- if (!local->rmem)
- goto failed;
-
-/*** Set up window for attribute memory ***********************************/
- link->resource[4]->flags |=
- WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT;
- link->resource[4]->start = 0;
- link->resource[4]->end = 0x1000;
- ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed);
- if (ret)
- goto failed;
- ret = pcmcia_map_mem_page(link, link->resource[4], 0);
- if (ret)
- goto failed;
- local->amem = ioremap(link->resource[4]->start,
- resource_size(link->resource[4]));
- if (!local->amem)
- goto failed;
-
- dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
- dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
- dev_dbg(&link->dev, "ray_config amem=%p\n", local->amem);
- if (ray_init(dev) < 0) {
- ray_release(link);
- return -ENODEV;
- }
-
- SET_NETDEV_DEV(dev, &link->dev);
- i = register_netdev(dev);
- if (i != 0) {
- printk("ray_config register_netdev() failed\n");
- ray_release(link);
- return i;
- }
-
- printk(KERN_INFO "%s: RayLink, irq %d, hw_addr %pM\n",
- dev->name, dev->irq, dev->dev_addr);
-
- return 0;
-
-failed:
- ray_release(link);
- return -ENODEV;
-} /* ray_config */
-
-static inline struct ccs __iomem *ccs_base(ray_dev_t *dev)
-{
- return dev->sram + CCS_BASE;
-}
-
-static inline struct rcs __iomem *rcs_base(ray_dev_t *dev)
-{
- /*
- * This looks nonsensical, since there is a separate
- * RCS_BASE. But the difference between a "struct rcs"
- * and a "struct ccs" ends up being in the _index_ off
- * the base, so the base pointer is the same for both
- * ccs/rcs.
- */
- return dev->sram + CCS_BASE;
-}
-
-/*===========================================================================*/
-static int ray_init(struct net_device *dev)
-{
- int i;
- struct ccs __iomem *pccs;
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link = local->finder;
- dev_dbg(&link->dev, "ray_init(0x%p)\n", dev);
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_init - device not present\n");
- return -1;
- }
-
- local->net_type = net_type;
- local->sta_type = TYPE_STA;
-
- /* Copy the startup results to local memory */
- memcpy_fromio(&local->startup_res, local->sram + ECF_TO_HOST_BASE,
- sizeof(struct startup_res_6));
-
- /* Check Power up test status and get mac address from card */
- if (local->startup_res.startup_word != 0x80) {
- printk(KERN_INFO "ray_init ERROR card status = %2x\n",
- local->startup_res.startup_word);
- local->card_status = CARD_INIT_ERROR;
- return -1;
- }
-
- local->fw_ver = local->startup_res.firmware_version[0];
- local->fw_bld = local->startup_res.firmware_version[1];
- local->fw_var = local->startup_res.firmware_version[2];
- dev_dbg(&link->dev, "ray_init firmware version %d.%d\n", local->fw_ver,
- local->fw_bld);
-
- local->tib_length = 0x20;
- if ((local->fw_ver == 5) && (local->fw_bld >= 30))
- local->tib_length = local->startup_res.tib_length;
- dev_dbg(&link->dev, "ray_init tib_length = 0x%02x\n", local->tib_length);
- /* Initialize CCS's to buffer free state */
- pccs = ccs_base(local);
- for (i = 0; i < NUMBER_OF_CCS; i++) {
- writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
- }
- init_startup_params(local);
-
- /* copy mac address to startup parameters */
- if (!parse_addr(phy_addr, local->sparm.b4.a_mac_addr)) {
- memcpy(&local->sparm.b4.a_mac_addr,
- &local->startup_res.station_addr, ADDRLEN);
- }
-
- clear_interrupt(local); /* Clear any interrupt from the card */
- local->card_status = CARD_AWAITING_PARAM;
- dev_dbg(&link->dev, "ray_init ending\n");
- return 0;
-} /* ray_init */
-
-/*===========================================================================*/
-/* Download startup parameters to the card and command it to read them */
-static int dl_startup_params(struct net_device *dev)
-{
- int ccsindex;
- ray_dev_t *local = netdev_priv(dev);
- struct ccs __iomem *pccs;
- struct pcmcia_device *link = local->finder;
-
- dev_dbg(&link->dev, "dl_startup_params entered\n");
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs dl_startup_params - device not present\n");
- return -1;
- }
-
- /* Copy parameters to host to ECF area */
- if (local->fw_ver == 0x55)
- memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b4,
- sizeof(struct b4_startup_params));
- else
- memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b5,
- sizeof(struct b5_startup_params));
-
- /* Fill in the CCS fields for the ECF */
- if ((ccsindex = get_free_ccs(local)) < 0)
- return -1;
- local->dl_param_ccs = ccsindex;
- pccs = ccs_base(local) + ccsindex;
- writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd);
- dev_dbg(&link->dev, "dl_startup_params start ccsindex = %d\n",
- local->dl_param_ccs);
- /* Interrupt the firmware to process the command */
- if (interrupt_ecf(local, ccsindex)) {
- printk(KERN_INFO "ray dl_startup_params failed - "
- "ECF not ready for intr\n");
- local->card_status = CARD_DL_PARAM_ERROR;
- writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
- return -2;
- }
- local->card_status = CARD_DL_PARAM;
- /* Start kernel timer to wait for dl startup to complete. */
- local->timer.expires = jiffies + HZ / 2;
- local->timer.function = verify_dl_startup;
- add_timer(&local->timer);
- dev_dbg(&link->dev,
- "ray_cs dl_startup_params started timer for verify_dl_startup\n");
- return 0;
-} /* dl_startup_params */
-
-/*===========================================================================*/
-static void init_startup_params(ray_dev_t *local)
-{
- int i;
-
- if (country > JAPAN_TEST)
- country = USA;
- else if (country < USA)
- country = USA;
- /* structure for hop time and beacon period is defined here using
- * New 802.11D6.1 format. Card firmware is still using old format
- * until version 6.
- * Before After
- * a_hop_time ms byte a_hop_time ms byte
- * a_hop_time 2s byte a_hop_time ls byte
- * a_hop_time ls byte a_beacon_period ms byte
- * a_beacon_period a_beacon_period ls byte
- *
- * a_hop_time = uS a_hop_time = KuS
- * a_beacon_period = hops a_beacon_period = KuS
- *//* 64ms = 010000 */
- if (local->fw_ver == 0x55) {
- memcpy(&local->sparm.b4, b4_default_startup_parms,
- sizeof(struct b4_startup_params));
- /* Translate sane kus input values to old build 4/5 format */
- /* i = hop time in uS truncated to 3 bytes */
- i = (hop_dwell * 1024) & 0xffffff;
- local->sparm.b4.a_hop_time[0] = (i >> 16) & 0xff;
- local->sparm.b4.a_hop_time[1] = (i >> 8) & 0xff;
- local->sparm.b4.a_beacon_period[0] = 0;
- local->sparm.b4.a_beacon_period[1] =
- ((beacon_period / hop_dwell) - 1) & 0xff;
- local->sparm.b4.a_curr_country_code = country;
- local->sparm.b4.a_hop_pattern_length =
- hop_pattern_length[(int)country] - 1;
- if (bc) {
- local->sparm.b4.a_ack_timeout = 0x50;
- local->sparm.b4.a_sifs = 0x3f;
- }
- } else { /* Version 5 uses real kus values */
- memcpy((UCHAR *) &local->sparm.b5, b5_default_startup_parms,
- sizeof(struct b5_startup_params));
-
- local->sparm.b5.a_hop_time[0] = (hop_dwell >> 8) & 0xff;
- local->sparm.b5.a_hop_time[1] = hop_dwell & 0xff;
- local->sparm.b5.a_beacon_period[0] =
- (beacon_period >> 8) & 0xff;
- local->sparm.b5.a_beacon_period[1] = beacon_period & 0xff;
- if (psm)
- local->sparm.b5.a_power_mgt_state = 1;
- local->sparm.b5.a_curr_country_code = country;
- local->sparm.b5.a_hop_pattern_length =
- hop_pattern_length[(int)country];
- }
-
- local->sparm.b4.a_network_type = net_type & 0x01;
- local->sparm.b4.a_acting_as_ap_status = TYPE_STA;
-
- if (essid != NULL)
- strscpy(local->sparm.b4.a_current_ess_id, essid, ESSID_SIZE);
-} /* init_startup_params */
-
-/*===========================================================================*/
-static void verify_dl_startup(struct timer_list *t)
-{
- ray_dev_t *local = from_timer(local, t, timer);
- struct ccs __iomem *pccs = ccs_base(local) + local->dl_param_ccs;
- UCHAR status;
- struct pcmcia_device *link = local->finder;
-
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs verify_dl_startup - device not present\n");
- return;
- }
-#if 0
- {
- int i;
- printk(KERN_DEBUG
- "verify_dl_startup parameters sent via ccs %d:\n",
- local->dl_param_ccs);
- for (i = 0; i < sizeof(struct b5_startup_params); i++) {
- printk(" %2x",
- (unsigned int)readb(local->sram +
- HOST_TO_ECF_BASE + i));
- }
- printk("\n");
- }
-#endif
-
- status = readb(&pccs->buffer_status);
- if (status != CCS_BUFFER_FREE) {
- printk(KERN_INFO
- "Download startup params failed. Status = %d\n",
- status);
- local->card_status = CARD_DL_PARAM_ERROR;
- return;
- }
- if (local->sparm.b4.a_network_type == ADHOC)
- start_net(&local->timer);
- else
- join_net(&local->timer);
-} /* end verify_dl_startup */
-
-/*===========================================================================*/
-/* Command card to start a network */
-static void start_net(struct timer_list *t)
-{
- ray_dev_t *local = from_timer(local, t, timer);
- struct ccs __iomem *pccs;
- int ccsindex;
- struct pcmcia_device *link = local->finder;
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs start_net - device not present\n");
- return;
- }
- /* Fill in the CCS fields for the ECF */
- if ((ccsindex = get_free_ccs(local)) < 0)
- return;
- pccs = ccs_base(local) + ccsindex;
- writeb(CCS_START_NETWORK, &pccs->cmd);
- writeb(0, &pccs->var.start_network.update_param);
- /* Interrupt the firmware to process the command */
- if (interrupt_ecf(local, ccsindex)) {
- dev_dbg(&link->dev, "ray start net failed - card not ready for intr\n");
- writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
- return;
- }
- local->card_status = CARD_DOING_ACQ;
-} /* end start_net */
-
-/*===========================================================================*/
-/* Command card to join a network */
-static void join_net(struct timer_list *t)
-{
- ray_dev_t *local = from_timer(local, t, timer);
-
- struct ccs __iomem *pccs;
- int ccsindex;
- struct pcmcia_device *link = local->finder;
-
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs join_net - device not present\n");
- return;
- }
- /* Fill in the CCS fields for the ECF */
- if ((ccsindex = get_free_ccs(local)) < 0)
- return;
- pccs = ccs_base(local) + ccsindex;
- writeb(CCS_JOIN_NETWORK, &pccs->cmd);
- writeb(0, &pccs->var.join_network.update_param);
- writeb(0, &pccs->var.join_network.net_initiated);
- /* Interrupt the firmware to process the command */
- if (interrupt_ecf(local, ccsindex)) {
- dev_dbg(&link->dev, "ray join net failed - card not ready for intr\n");
- writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
- return;
- }
- local->card_status = CARD_DOING_ACQ;
-}
-
-
-static void ray_release(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- ray_dev_t *local = netdev_priv(dev);
-
- dev_dbg(&link->dev, "ray_release\n");
-
- del_timer_sync(&local->timer);
-
- if (local->sram)
- iounmap(local->sram);
- if (local->rmem)
- iounmap(local->rmem);
- if (local->amem)
- iounmap(local->amem);
- pcmcia_disable_device(link);
-
- dev_dbg(&link->dev, "ray_release ending\n");
-}
-
-static int ray_suspend(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open)
- netif_device_detach(dev);
-
- return 0;
-}
-
-static int ray_resume(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open) {
- ray_reset(dev);
- netif_device_attach(dev);
- }
-
- return 0;
-}
-
-/*===========================================================================*/
-static int ray_dev_init(struct net_device *dev)
-{
-#ifdef RAY_IMMEDIATE_INIT
- int i;
-#endif /* RAY_IMMEDIATE_INIT */
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link = local->finder;
-
- dev_dbg(&link->dev, "ray_dev_init(dev=%p)\n", dev);
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_dev_init - device not present\n");
- return -1;
- }
-#ifdef RAY_IMMEDIATE_INIT
- /* Download startup parameters */
- if ((i = dl_startup_params(dev)) < 0) {
- printk(KERN_INFO "ray_dev_init dl_startup_params failed - "
- "returns 0x%x\n", i);
- return -1;
- }
-#else /* RAY_IMMEDIATE_INIT */
- /* Postpone the card init so that we can still configure the card,
- * for example using the Wireless Extensions. The init will happen
- * in ray_open() - Jean II */
- dev_dbg(&link->dev,
- "ray_dev_init: postponing card init to ray_open() ; Status = %d\n",
- local->card_status);
-#endif /* RAY_IMMEDIATE_INIT */
-
- /* copy mac and broadcast addresses to linux device */
- eth_hw_addr_set(dev, local->sparm.b4.a_mac_addr);
- eth_broadcast_addr(dev->broadcast);
-
- dev_dbg(&link->dev, "ray_dev_init ending\n");
- return 0;
-}
-
-/*===========================================================================*/
-static int ray_dev_config(struct net_device *dev, struct ifmap *map)
-{
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link = local->finder;
- /* Dummy routine to satisfy device structure */
- dev_dbg(&link->dev, "ray_dev_config(dev=%p,ifmap=%p)\n", dev, map);
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_dev_config - device not present\n");
- return -1;
- }
-
- return 0;
-}
-
-/*===========================================================================*/
-static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link = local->finder;
- short length = skb->len;
-
- if (!pcmcia_dev_present(link)) {
- dev_dbg(&link->dev, "ray_dev_start_xmit - device not present\n");
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-
- dev_dbg(&link->dev, "ray_dev_start_xmit(skb=%p, dev=%p)\n", skb, dev);
- if (local->authentication_state == NEED_TO_AUTH) {
- dev_dbg(&link->dev, "ray_cs Sending authentication request.\n");
- if (!build_auth_frame(local, local->auth_id, OPEN_AUTH_REQUEST)) {
- local->authentication_state = AUTHENTICATED;
- netif_stop_queue(dev);
- return NETDEV_TX_BUSY;
- }
- }
-
- if (length < ETH_ZLEN) {
- if (skb_padto(skb, ETH_ZLEN))
- return NETDEV_TX_OK;
- length = ETH_ZLEN;
- }
- switch (ray_hw_xmit(skb->data, length, dev, DATA_TYPE)) {
- case XMIT_NO_CCS:
- case XMIT_NEED_AUTH:
- netif_stop_queue(dev);
- return NETDEV_TX_BUSY;
- case XMIT_NO_INTR:
- case XMIT_MSG_BAD:
- case XMIT_OK:
- default:
- dev_kfree_skb(skb);
- }
-
- return NETDEV_TX_OK;
-} /* ray_dev_start_xmit */
-
-/*===========================================================================*/
-static int ray_hw_xmit(unsigned char *data, int len, struct net_device *dev,
- UCHAR msg_type)
-{
- ray_dev_t *local = netdev_priv(dev);
- struct ccs __iomem *pccs;
- int ccsindex;
- int offset;
- struct tx_msg __iomem *ptx; /* Address of xmit buffer in PC space */
- short int addr; /* Address of xmit buffer in card space */
-
- pr_debug("ray_hw_xmit(data=%p, len=%d, dev=%p)\n", data, len, dev);
- if (len + TX_HEADER_LENGTH > TX_BUF_SIZE) {
- printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n",
- len);
- return XMIT_MSG_BAD;
- }
- switch (ccsindex = get_free_tx_ccs(local)) {
- case ECCSBUSY:
- pr_debug("ray_hw_xmit tx_ccs table busy\n");
- fallthrough;
- case ECCSFULL:
- pr_debug("ray_hw_xmit No free tx ccs\n");
- fallthrough;
- case ECARDGONE:
- netif_stop_queue(dev);
- return XMIT_NO_CCS;
- default:
- break;
- }
- addr = TX_BUF_BASE + (ccsindex << 11);
-
- if (msg_type == DATA_TYPE) {
- local->stats.tx_bytes += len;
- local->stats.tx_packets++;
- }
-
- ptx = local->sram + addr;
-
- ray_build_header(local, ptx, msg_type, data);
- if (translate) {
- offset = translate_frame(local, ptx, data, len);
- } else { /* Encapsulate frame */
- /* TBD TIB length will move address of ptx->var */
- memcpy_toio(&ptx->var, data, len);
- offset = 0;
- }
-
- /* fill in the CCS */
- pccs = ccs_base(local) + ccsindex;
- len += TX_HEADER_LENGTH + offset;
- writeb(CCS_TX_REQUEST, &pccs->cmd);
- writeb(addr >> 8, &pccs->var.tx_request.tx_data_ptr[0]);
- writeb(local->tib_length, &pccs->var.tx_request.tx_data_ptr[1]);
- writeb(len >> 8, &pccs->var.tx_request.tx_data_length[0]);
- writeb(len & 0xff, &pccs->var.tx_request.tx_data_length[1]);
-/* TBD still need psm_cam? */
- writeb(PSM_CAM, &pccs->var.tx_request.pow_sav_mode);
- writeb(local->net_default_tx_rate, &pccs->var.tx_request.tx_rate);
- writeb(0, &pccs->var.tx_request.antenna);
- pr_debug("ray_hw_xmit default_tx_rate = 0x%x\n",
- local->net_default_tx_rate);
-
- /* Interrupt the firmware to process the command */
- if (interrupt_ecf(local, ccsindex)) {
- pr_debug("ray_hw_xmit failed - ECF not ready for intr\n");
-/* TBD very inefficient to copy packet to buffer, and then not
- send it, but the alternative is to queue the messages and that
- won't be done for a while. Maybe set tbusy until a CCS is free?
-*/
- writeb(CCS_BUFFER_FREE, &pccs->buffer_status);
- return XMIT_NO_INTR;
- }
- return XMIT_OK;
-} /* end ray_hw_xmit */
-
-/*===========================================================================*/
-static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
- unsigned char *data, int len)
-{
- __be16 proto = ((struct ethhdr *)data)->h_proto;
- if (ntohs(proto) >= ETH_P_802_3_MIN) { /* DIX II ethernet frame */
- pr_debug("ray_cs translate_frame DIX II\n");
- /* Copy LLC header to card buffer */
- memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc));
- memcpy_toio(((void __iomem *)&ptx->var) + sizeof(eth2_llc),
- (UCHAR *) &proto, 2);
- if (proto == htons(ETH_P_AARP) || proto == htons(ETH_P_IPX)) {
- /* This is the selective translation table, only 2 entries */
- writeb(0xf8,
- &((struct snaphdr_t __iomem *)ptx->var)->org[2]);
- }
- /* Copy body of ethernet packet without ethernet header */
- memcpy_toio((void __iomem *)&ptx->var +
- sizeof(struct snaphdr_t), data + ETH_HLEN,
- len - ETH_HLEN);
- return (int)sizeof(struct snaphdr_t) - ETH_HLEN;
- } else { /* already 802 type, and proto is length */
- pr_debug("ray_cs translate_frame 802\n");
- if (proto == htons(0xffff)) { /* evil netware IPX 802.3 without LLC */
- pr_debug("ray_cs translate_frame evil IPX\n");
- memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN);
- return 0 - ETH_HLEN;
- }
- memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN);
- return 0 - ETH_HLEN;
- }
- /* TBD do other frame types */
-} /* end translate_frame */
-
-/*===========================================================================*/
-static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx,
- UCHAR msg_type, unsigned char *data)
-{
- writeb(PROTOCOL_VER | msg_type, &ptx->mac.frame_ctl_1);
-/*** IEEE 802.11 Address field assignments *************
- TODS FROMDS addr_1 addr_2 addr_3 addr_4
-Adhoc 0 0 dest src (terminal) BSSID N/A
-AP to Terminal 0 1 dest AP(BSSID) source N/A
-Terminal to AP 1 0 AP(BSSID) src (terminal) dest N/A
-AP to AP 1 1 dest AP src AP dest source
-*******************************************************/
- if (local->net_type == ADHOC) {
- writeb(0, &ptx->mac.frame_ctl_2);
- memcpy_toio(ptx->mac.addr_1, ((struct ethhdr *)data)->h_dest,
- ADDRLEN);
- memcpy_toio(ptx->mac.addr_2, ((struct ethhdr *)data)->h_source,
- ADDRLEN);
- memcpy_toio(ptx->mac.addr_3, local->bss_id, ADDRLEN);
- } else { /* infrastructure */
-
- if (local->sparm.b4.a_acting_as_ap_status) {
- writeb(FC2_FROM_DS, &ptx->mac.frame_ctl_2);
- memcpy_toio(ptx->mac.addr_1,
- ((struct ethhdr *)data)->h_dest, ADDRLEN);
- memcpy_toio(ptx->mac.addr_2, local->bss_id, 6);
- memcpy_toio(ptx->mac.addr_3,
- ((struct ethhdr *)data)->h_source, ADDRLEN);
- } else { /* Terminal */
-
- writeb(FC2_TO_DS, &ptx->mac.frame_ctl_2);
- memcpy_toio(ptx->mac.addr_1, local->bss_id, ADDRLEN);
- memcpy_toio(ptx->mac.addr_2,
- ((struct ethhdr *)data)->h_source, ADDRLEN);
- memcpy_toio(ptx->mac.addr_3,
- ((struct ethhdr *)data)->h_dest, ADDRLEN);
- }
- }
-} /* end encapsulate_frame */
-
-/*====================================================================*/
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get protocol name
- */
-static int ray_get_name(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- strcpy(wrqu->name, "IEEE 802.11-FH");
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set frequency
- */
-static int ray_set_freq(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
-
- /* Reject if card is already initialised */
- if (local->card_status != CARD_AWAITING_PARAM)
- return -EBUSY;
-
- /* Setting by channel number */
- if ((wrqu->freq.m > USA_HOP_MOD) || (wrqu->freq.e > 0))
- err = -EOPNOTSUPP;
- else
- local->sparm.b5.a_hop_pattern = wrqu->freq.m;
-
- return err;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get frequency
- */
-static int ray_get_freq(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
-
- wrqu->freq.m = local->sparm.b5.a_hop_pattern;
- wrqu->freq.e = 0;
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set ESSID
- */
-static int ray_set_essid(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
-
- /* Reject if card is already initialised */
- if (local->card_status != CARD_AWAITING_PARAM)
- return -EBUSY;
-
- /* Check if we asked for `any' */
- if (wrqu->essid.flags == 0)
- /* Corey : can you do that ? */
- return -EOPNOTSUPP;
-
- /* Check the size of the string */
- if (wrqu->essid.length > IW_ESSID_MAX_SIZE)
- return -E2BIG;
-
- /* Set the ESSID in the card */
- memset(local->sparm.b5.a_current_ess_id, 0, IW_ESSID_MAX_SIZE);
- memcpy(local->sparm.b5.a_current_ess_id, extra, wrqu->essid.length);
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get ESSID
- */
-static int ray_get_essid(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
- UCHAR tmp[IW_ESSID_MAX_SIZE + 1];
-
- /* Get the essid that was set */
- memcpy(extra, local->sparm.b5.a_current_ess_id, IW_ESSID_MAX_SIZE);
- memcpy(tmp, local->sparm.b5.a_current_ess_id, IW_ESSID_MAX_SIZE);
- tmp[IW_ESSID_MAX_SIZE] = '\0';
-
- /* Push it out ! */
- wrqu->essid.length = strlen(tmp);
- wrqu->essid.flags = 1; /* active */
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get AP address
- */
-static int ray_get_wap(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
-
- memcpy(wrqu->ap_addr.sa_data, local->bss_id, ETH_ALEN);
- wrqu->ap_addr.sa_family = ARPHRD_ETHER;
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set Bit-Rate
- */
-static int ray_set_rate(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
-
- /* Reject if card is already initialised */
- if (local->card_status != CARD_AWAITING_PARAM)
- return -EBUSY;
-
- /* Check if rate is in range */
- if ((wrqu->bitrate.value != 1000000) && (wrqu->bitrate.value != 2000000))
- return -EINVAL;
-
- /* Hack for 1.5 Mb/s instead of 2 Mb/s */
- if ((local->fw_ver == 0x55) && /* Please check */
- (wrqu->bitrate.value == 2000000))
- local->net_default_tx_rate = 3;
- else
- local->net_default_tx_rate = wrqu->bitrate.value / 500000;
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get Bit-Rate
- */
-static int ray_get_rate(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
-
- if (local->net_default_tx_rate == 3)
- wrqu->bitrate.value = 2000000; /* Hum... */
- else
- wrqu->bitrate.value = local->net_default_tx_rate * 500000;
- wrqu->bitrate.fixed = 0; /* We are in auto mode */
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set RTS threshold
- */
-static int ray_set_rts(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
- int rthr = wrqu->rts.value;
-
- /* Reject if card is already initialised */
- if (local->card_status != CARD_AWAITING_PARAM)
- return -EBUSY;
-
- /* if(wrq->u.rts.fixed == 0) we should complain */
- if (wrqu->rts.disabled)
- rthr = 32767;
- else {
- if ((rthr < 0) || (rthr > 2347)) /* What's the max packet size ??? */
- return -EINVAL;
- }
- local->sparm.b5.a_rts_threshold[0] = (rthr >> 8) & 0xFF;
- local->sparm.b5.a_rts_threshold[1] = rthr & 0xFF;
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get RTS threshold
- */
-static int ray_get_rts(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
-
- wrqu->rts.value = (local->sparm.b5.a_rts_threshold[0] << 8)
- + local->sparm.b5.a_rts_threshold[1];
- wrqu->rts.disabled = (wrqu->rts.value == 32767);
- wrqu->rts.fixed = 1;
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set Fragmentation threshold
- */
-static int ray_set_frag(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
- int fthr = wrqu->frag.value;
-
- /* Reject if card is already initialised */
- if (local->card_status != CARD_AWAITING_PARAM)
- return -EBUSY;
-
- /* if(wrq->u.frag.fixed == 0) should complain */
- if (wrqu->frag.disabled)
- fthr = 32767;
- else {
- if ((fthr < 256) || (fthr > 2347)) /* To check out ! */
- return -EINVAL;
- }
- local->sparm.b5.a_frag_threshold[0] = (fthr >> 8) & 0xFF;
- local->sparm.b5.a_frag_threshold[1] = fthr & 0xFF;
-
- return -EINPROGRESS; /* Call commit handler */
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get Fragmentation threshold
- */
-static int ray_get_frag(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
-
- wrqu->frag.value = (local->sparm.b5.a_frag_threshold[0] << 8)
- + local->sparm.b5.a_frag_threshold[1];
- wrqu->frag.disabled = (wrqu->frag.value == 32767);
- wrqu->frag.fixed = 1;
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set Mode of Operation
- */
-static int ray_set_mode(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
- int err = -EINPROGRESS; /* Call commit handler */
- char card_mode = 1;
-
- /* Reject if card is already initialised */
- if (local->card_status != CARD_AWAITING_PARAM)
- return -EBUSY;
-
- switch (wrqu->mode) {
- case IW_MODE_ADHOC:
- card_mode = 0;
- fallthrough;
- case IW_MODE_INFRA:
- local->sparm.b5.a_network_type = card_mode;
- break;
- default:
- err = -EINVAL;
- }
-
- return err;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get Mode of Operation
- */
-static int ray_get_mode(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- ray_dev_t *local = netdev_priv(dev);
-
- if (local->sparm.b5.a_network_type)
- wrqu->mode = IW_MODE_INFRA;
- else
- wrqu->mode = IW_MODE_ADHOC;
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get range info
- */
-static int ray_get_range(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- struct iw_range *range = (struct iw_range *)extra;
-
- memset(range, 0, sizeof(struct iw_range));
-
- /* Set the length (very important for backward compatibility) */
- wrqu->data.length = sizeof(struct iw_range);
-
- /* Set the Wireless Extension versions */
- range->we_version_compiled = WIRELESS_EXT;
- range->we_version_source = 9;
-
- /* Set information in the range struct */
- range->throughput = 1.1 * 1000 * 1000; /* Put the right number here */
- range->num_channels = hop_pattern_length[(int)country];
- range->num_frequency = 0;
- range->max_qual.qual = 0;
- range->max_qual.level = 255; /* What's the correct value ? */
- range->max_qual.noise = 255; /* Idem */
- range->num_bitrates = 2;
- range->bitrate[0] = 1000000; /* 1 Mb/s */
- range->bitrate[1] = 2000000; /* 2 Mb/s */
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set framing mode
- */
-static int ray_set_framing(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- translate = !!*(extra); /* Set framing mode */
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get framing mode
- */
-static int ray_get_framing(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- *(extra) = translate;
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get country
- */
-static int ray_get_country(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- *(extra) = country;
-
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Commit handler : called after a bunch of SET operations
- */
-static int ray_commit(struct net_device *dev, struct iw_request_info *info,
- union iwreq_data *wrqu, char *extra)
-{
- return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Stats handler : return Wireless Stats
- */
-static iw_stats *ray_get_wireless_stats(struct net_device *dev)
-{
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link = local->finder;
- struct status __iomem *p = local->sram + STATUS_BASE;
-
- local->wstats.status = local->card_status;
-#ifdef WIRELESS_SPY
- if ((local->spy_data.spy_number > 0)
- && (local->sparm.b5.a_network_type == 0)) {
- /* Get it from the first node in spy list */
- local->wstats.qual.qual = local->spy_data.spy_stat[0].qual;
- local->wstats.qual.level = local->spy_data.spy_stat[0].level;
- local->wstats.qual.noise = local->spy_data.spy_stat[0].noise;
- local->wstats.qual.updated =
- local->spy_data.spy_stat[0].updated;
- }
-#endif /* WIRELESS_SPY */
-
- if (pcmcia_dev_present(link)) {
- local->wstats.qual.noise = readb(&p->rxnoise);
- local->wstats.qual.updated |= 4;
- }
-
- return &local->wstats;
-} /* end ray_get_wireless_stats */
-
-/*------------------------------------------------------------------*/
-/*
- * Structures to export the Wireless Handlers
- */
-
-static const iw_handler ray_handler[] = {
- IW_HANDLER(SIOCSIWCOMMIT, ray_commit),
- IW_HANDLER(SIOCGIWNAME, ray_get_name),
- IW_HANDLER(SIOCSIWFREQ, ray_set_freq),
- IW_HANDLER(SIOCGIWFREQ, ray_get_freq),
- IW_HANDLER(SIOCSIWMODE, ray_set_mode),
- IW_HANDLER(SIOCGIWMODE, ray_get_mode),
- IW_HANDLER(SIOCGIWRANGE, ray_get_range),
-#ifdef WIRELESS_SPY
- IW_HANDLER(SIOCSIWSPY, iw_handler_set_spy),
- IW_HANDLER(SIOCGIWSPY, iw_handler_get_spy),
- IW_HANDLER(SIOCSIWTHRSPY, iw_handler_set_thrspy),
- IW_HANDLER(SIOCGIWTHRSPY, iw_handler_get_thrspy),
-#endif /* WIRELESS_SPY */
- IW_HANDLER(SIOCGIWAP, ray_get_wap),
- IW_HANDLER(SIOCSIWESSID, ray_set_essid),
- IW_HANDLER(SIOCGIWESSID, ray_get_essid),
- IW_HANDLER(SIOCSIWRATE, ray_set_rate),
- IW_HANDLER(SIOCGIWRATE, ray_get_rate),
- IW_HANDLER(SIOCSIWRTS, ray_set_rts),
- IW_HANDLER(SIOCGIWRTS, ray_get_rts),
- IW_HANDLER(SIOCSIWFRAG, ray_set_frag),
- IW_HANDLER(SIOCGIWFRAG, ray_get_frag),
-};
-
-#define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */
-#define SIOCGIPFRAMING SIOCIWFIRSTPRIV + 1 /* Get framing mode */
-#define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */
-
-static const iw_handler ray_private_handler[] = {
- [0] = ray_set_framing,
- [1] = ray_get_framing,
- [3] = ray_get_country,
-};
-
-static const struct iw_priv_args ray_private_args[] = {
-/* cmd, set_args, get_args, name */
- {SIOCSIPFRAMING, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0,
- "set_framing"},
- {SIOCGIPFRAMING, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
- "get_framing"},
- {SIOCGIPCOUNTRY, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1,
- "get_country"},
-};
-
-static const struct iw_handler_def ray_handler_def = {
- .num_standard = ARRAY_SIZE(ray_handler),
- .num_private = ARRAY_SIZE(ray_private_handler),
- .num_private_args = ARRAY_SIZE(ray_private_args),
- .standard = ray_handler,
- .private = ray_private_handler,
- .private_args = ray_private_args,
- .get_wireless_stats = ray_get_wireless_stats,
-};
-
-/*===========================================================================*/
-static int ray_open(struct net_device *dev)
-{
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link;
- link = local->finder;
-
- dev_dbg(&link->dev, "ray_open('%s')\n", dev->name);
-
- if (link->open == 0)
- local->num_multi = 0;
- link->open++;
-
- /* If the card is not started, time to start it ! - Jean II */
- if (local->card_status == CARD_AWAITING_PARAM) {
- int i;
-
- dev_dbg(&link->dev, "ray_open: doing init now !\n");
-
- /* Download startup parameters */
- if ((i = dl_startup_params(dev)) < 0) {
- printk(KERN_INFO
- "ray_dev_init dl_startup_params failed - "
- "returns 0x%x\n", i);
- return -1;
- }
- }
-
- if (sniffer)
- netif_stop_queue(dev);
- else
- netif_start_queue(dev);
-
- dev_dbg(&link->dev, "ray_open ending\n");
- return 0;
-} /* end ray_open */
-
-/*===========================================================================*/
-static int ray_dev_close(struct net_device *dev)
-{
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link;
- link = local->finder;
-
- dev_dbg(&link->dev, "ray_dev_close('%s')\n", dev->name);
-
- link->open--;
- netif_stop_queue(dev);
-
- /* In here, we should stop the hardware (stop card from beeing active)
- * and set local->card_status to CARD_AWAITING_PARAM, so that while the
- * card is closed we can chage its configuration.
- * Probably also need a COR reset to get sane state - Jean II */
-
- return 0;
-} /* end ray_dev_close */
-
-/*===========================================================================*/
-static void ray_reset(struct net_device *dev)
-{
- pr_debug("ray_reset entered\n");
-}
-
-/*===========================================================================*/
-/* Cause a firmware interrupt if it is ready for one */
-/* Return nonzero if not ready */
-static int interrupt_ecf(ray_dev_t *local, int ccs)
-{
- int i = 50;
- struct pcmcia_device *link = local->finder;
-
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs interrupt_ecf - device not present\n");
- return -1;
- }
- dev_dbg(&link->dev, "interrupt_ecf(local=%p, ccs = 0x%x\n", local, ccs);
-
- while (i &&
- (readb(local->amem + CIS_OFFSET + ECF_INTR_OFFSET) &
- ECF_INTR_SET))
- i--;
- if (i == 0) {
- dev_dbg(&link->dev, "ray_cs interrupt_ecf card not ready for interrupt\n");
- return -1;
- }
- /* Fill the mailbox, then kick the card */
- writeb(ccs, local->sram + SCB_BASE);
- writeb(ECF_INTR_SET, local->amem + CIS_OFFSET + ECF_INTR_OFFSET);
- return 0;
-} /* interrupt_ecf */
-
-/*===========================================================================*/
-/* Get next free transmit CCS */
-/* Return - index of current tx ccs */
-static int get_free_tx_ccs(ray_dev_t *local)
-{
- int i;
- struct ccs __iomem *pccs = ccs_base(local);
- struct pcmcia_device *link = local->finder;
-
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs get_free_tx_ccs - device not present\n");
- return ECARDGONE;
- }
-
- if (test_and_set_bit(0, &local->tx_ccs_lock)) {
- dev_dbg(&link->dev, "ray_cs tx_ccs_lock busy\n");
- return ECCSBUSY;
- }
-
- for (i = 0; i < NUMBER_OF_TX_CCS; i++) {
- if (readb(&(pccs + i)->buffer_status) == CCS_BUFFER_FREE) {
- writeb(CCS_BUFFER_BUSY, &(pccs + i)->buffer_status);
- writeb(CCS_END_LIST, &(pccs + i)->link);
- local->tx_ccs_lock = 0;
- return i;
- }
- }
- local->tx_ccs_lock = 0;
- dev_dbg(&link->dev, "ray_cs ERROR no free tx CCS for raylink card\n");
- return ECCSFULL;
-} /* get_free_tx_ccs */
-
-/*===========================================================================*/
-/* Get next free CCS */
-/* Return - index of current ccs */
-static int get_free_ccs(ray_dev_t *local)
-{
- int i;
- struct ccs __iomem *pccs = ccs_base(local);
- struct pcmcia_device *link = local->finder;
-
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs get_free_ccs - device not present\n");
- return ECARDGONE;
- }
- if (test_and_set_bit(0, &local->ccs_lock)) {
- dev_dbg(&link->dev, "ray_cs ccs_lock busy\n");
- return ECCSBUSY;
- }
-
- for (i = NUMBER_OF_TX_CCS; i < NUMBER_OF_CCS; i++) {
- if (readb(&(pccs + i)->buffer_status) == CCS_BUFFER_FREE) {
- writeb(CCS_BUFFER_BUSY, &(pccs + i)->buffer_status);
- writeb(CCS_END_LIST, &(pccs + i)->link);
- local->ccs_lock = 0;
- return i;
- }
- }
- local->ccs_lock = 0;
- dev_dbg(&link->dev, "ray_cs ERROR no free CCS for raylink card\n");
- return ECCSFULL;
-} /* get_free_ccs */
-
-/*===========================================================================*/
-static void authenticate_timeout(struct timer_list *t)
-{
- ray_dev_t *local = from_timer(local, t, timer);
- del_timer(&local->timer);
- printk(KERN_INFO "ray_cs Authentication with access point failed"
- " - timeout\n");
- join_net(&local->timer);
-}
-
-/*===========================================================================*/
-static int parse_addr(char *in_str, UCHAR *out)
-{
- int i, k;
- int len;
-
- if (in_str == NULL)
- return 0;
- len = strnlen(in_str, ADDRLEN * 2 + 1) - 1;
- if (len < 1)
- return 0;
- memset(out, 0, ADDRLEN);
-
- i = 5;
-
- while (len > 0) {
- if ((k = hex_to_bin(in_str[len--])) != -1)
- out[i] = k;
- else
- return 0;
-
- if (len == 0)
- break;
- if ((k = hex_to_bin(in_str[len--])) != -1)
- out[i] += k << 4;
- else
- return 0;
- if (!i--)
- break;
- }
- return 1;
-}
-
-/*===========================================================================*/
-static struct net_device_stats *ray_get_stats(struct net_device *dev)
-{
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link = local->finder;
- struct status __iomem *p = local->sram + STATUS_BASE;
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs net_device_stats - device not present\n");
- return &local->stats;
- }
- if (readb(&p->mrx_overflow_for_host)) {
- local->stats.rx_over_errors += swab16(readw(&p->mrx_overflow));
- writeb(0, &p->mrx_overflow);
- writeb(0, &p->mrx_overflow_for_host);
- }
- if (readb(&p->mrx_checksum_error_for_host)) {
- local->stats.rx_crc_errors +=
- swab16(readw(&p->mrx_checksum_error));
- writeb(0, &p->mrx_checksum_error);
- writeb(0, &p->mrx_checksum_error_for_host);
- }
- if (readb(&p->rx_hec_error_for_host)) {
- local->stats.rx_frame_errors += swab16(readw(&p->rx_hec_error));
- writeb(0, &p->rx_hec_error);
- writeb(0, &p->rx_hec_error_for_host);
- }
- return &local->stats;
-}
-
-/*===========================================================================*/
-static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value,
- int len)
-{
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link = local->finder;
- int ccsindex;
- int i;
- struct ccs __iomem *pccs;
-
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_update_parm - device not present\n");
- return;
- }
-
- if ((ccsindex = get_free_ccs(local)) < 0) {
- dev_dbg(&link->dev, "ray_update_parm - No free ccs\n");
- return;
- }
- pccs = ccs_base(local) + ccsindex;
- writeb(CCS_UPDATE_PARAMS, &pccs->cmd);
- writeb(objid, &pccs->var.update_param.object_id);
- writeb(1, &pccs->var.update_param.number_objects);
- writeb(0, &pccs->var.update_param.failure_cause);
- for (i = 0; i < len; i++) {
- writeb(value[i], local->sram + HOST_TO_ECF_BASE);
- }
- /* Interrupt the firmware to process the command */
- if (interrupt_ecf(local, ccsindex)) {
- dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
- writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
- }
-}
-
-/*===========================================================================*/
-static void ray_update_multi_list(struct net_device *dev, int all)
-{
- int ccsindex;
- struct ccs __iomem *pccs;
- ray_dev_t *local = netdev_priv(dev);
- struct pcmcia_device *link = local->finder;
- void __iomem *p = local->sram + HOST_TO_ECF_BASE;
-
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_update_multi_list - device not present\n");
- return;
- } else
- dev_dbg(&link->dev, "ray_update_multi_list(%p)\n", dev);
- if ((ccsindex = get_free_ccs(local)) < 0) {
- dev_dbg(&link->dev, "ray_update_multi - No free ccs\n");
- return;
- }
- pccs = ccs_base(local) + ccsindex;
- writeb(CCS_UPDATE_MULTICAST_LIST, &pccs->cmd);
-
- if (all) {
- writeb(0xff, &pccs->var);
- local->num_multi = 0xff;
- } else {
- struct netdev_hw_addr *ha;
- int i = 0;
-
- /* Copy the kernel's list of MC addresses to card */
- netdev_for_each_mc_addr(ha, dev) {
- memcpy_toio(p, ha->addr, ETH_ALEN);
- dev_dbg(&link->dev, "ray_update_multi add addr %pm\n",
- ha->addr);
- p += ETH_ALEN;
- i++;
- }
- if (i > 256 / ADDRLEN)
- i = 256 / ADDRLEN;
- writeb((UCHAR) i, &pccs->var);
- dev_dbg(&link->dev, "ray_cs update_multi %d addresses in list\n", i);
- /* Interrupt the firmware to process the command */
- local->num_multi = i;
- }
- if (interrupt_ecf(local, ccsindex)) {
- dev_dbg(&link->dev,
- "ray_cs update_multi failed - ECF not ready for intr\n");
- writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
- }
-} /* end ray_update_multi_list */
-
-/*===========================================================================*/
-static void set_multicast_list(struct net_device *dev)
-{
- ray_dev_t *local = netdev_priv(dev);
- UCHAR promisc;
-
- pr_debug("ray_cs set_multicast_list(%p)\n", dev);
-
- if (dev->flags & IFF_PROMISC) {
- if (local->sparm.b5.a_promiscuous_mode == 0) {
- pr_debug("ray_cs set_multicast_list promisc on\n");
- local->sparm.b5.a_promiscuous_mode = 1;
- promisc = 1;
- ray_update_parm(dev, OBJID_promiscuous_mode,
- &promisc, sizeof(promisc));
- }
- } else {
- if (local->sparm.b5.a_promiscuous_mode == 1) {
- pr_debug("ray_cs set_multicast_list promisc off\n");
- local->sparm.b5.a_promiscuous_mode = 0;
- promisc = 0;
- ray_update_parm(dev, OBJID_promiscuous_mode,
- &promisc, sizeof(promisc));
- }
- }
-
- if (dev->flags & IFF_ALLMULTI)
- ray_update_multi_list(dev, 1);
- else {
- if (local->num_multi != netdev_mc_count(dev))
- ray_update_multi_list(dev, 0);
- }
-} /* end set_multicast_list */
-
-/*=============================================================================
- * All routines below here are run at interrupt time.
-=============================================================================*/
-static irqreturn_t ray_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct pcmcia_device *link;
- ray_dev_t *local;
- struct ccs __iomem *pccs;
- struct rcs __iomem *prcs;
- UCHAR rcsindex;
- UCHAR tmp;
- UCHAR cmd;
- UCHAR status;
- UCHAR memtmp[ESSID_SIZE + 1];
-
-
- if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */
- return IRQ_NONE;
-
- pr_debug("ray_cs: interrupt for *dev=%p\n", dev);
-
- local = netdev_priv(dev);
- link = local->finder;
- if (!pcmcia_dev_present(link)) {
- pr_debug(
- "ray_cs interrupt from device not present or suspended.\n");
- return IRQ_NONE;
- }
- rcsindex = readb(&((struct scb __iomem *)(local->sram))->rcs_index);
-
- if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
- dev_dbg(&link->dev, "ray_cs interrupt bad rcsindex = 0x%x\n", rcsindex);
- clear_interrupt(local);
- return IRQ_HANDLED;
- }
- if (rcsindex < NUMBER_OF_CCS) { /* If it's a returned CCS */
- pccs = ccs_base(local) + rcsindex;
- cmd = readb(&pccs->cmd);
- status = readb(&pccs->buffer_status);
- switch (cmd) {
- case CCS_DOWNLOAD_STARTUP_PARAMS: /* Happens in firmware someday */
- del_timer(&local->timer);
- if (status == CCS_COMMAND_COMPLETE) {
- dev_dbg(&link->dev,
- "ray_cs interrupt download_startup_parameters OK\n");
- } else {
- dev_dbg(&link->dev,
- "ray_cs interrupt download_startup_parameters fail\n");
- }
- break;
- case CCS_UPDATE_PARAMS:
- dev_dbg(&link->dev, "ray_cs interrupt update params done\n");
- if (status != CCS_COMMAND_COMPLETE) {
- tmp =
- readb(&pccs->var.update_param.
- failure_cause);
- dev_dbg(&link->dev,
- "ray_cs interrupt update params failed - reason %d\n",
- tmp);
- }
- break;
- case CCS_REPORT_PARAMS:
- dev_dbg(&link->dev, "ray_cs interrupt report params done\n");
- break;
- case CCS_UPDATE_MULTICAST_LIST: /* Note that this CCS isn't returned */
- dev_dbg(&link->dev,
- "ray_cs interrupt CCS Update Multicast List done\n");
- break;
- case CCS_UPDATE_POWER_SAVINGS_MODE:
- dev_dbg(&link->dev,
- "ray_cs interrupt update power save mode done\n");
- break;
- case CCS_START_NETWORK:
- case CCS_JOIN_NETWORK:
- memcpy(memtmp, local->sparm.b4.a_current_ess_id,
- ESSID_SIZE);
- memtmp[ESSID_SIZE] = '\0';
-
- if (status == CCS_COMMAND_COMPLETE) {
- if (readb
- (&pccs->var.start_network.net_initiated) ==
- 1) {
- dev_dbg(&link->dev,
- "ray_cs interrupt network \"%s\" started\n",
- memtmp);
- } else {
- dev_dbg(&link->dev,
- "ray_cs interrupt network \"%s\" joined\n",
- memtmp);
- }
- memcpy_fromio(&local->bss_id,
- pccs->var.start_network.bssid,
- ADDRLEN);
-
- if (local->fw_ver == 0x55)
- local->net_default_tx_rate = 3;
- else
- local->net_default_tx_rate =
- readb(&pccs->var.start_network.
- net_default_tx_rate);
- local->encryption =
- readb(&pccs->var.start_network.encryption);
- if (!sniffer && (local->net_type == INFRA)
- && !(local->sparm.b4.a_acting_as_ap_status)) {
- authenticate(local);
- }
- local->card_status = CARD_ACQ_COMPLETE;
- } else {
- local->card_status = CARD_ACQ_FAILED;
-
- del_timer(&local->timer);
- local->timer.expires = jiffies + HZ * 5;
- if (status == CCS_START_NETWORK) {
- dev_dbg(&link->dev,
- "ray_cs interrupt network \"%s\" start failed\n",
- memtmp);
- local->timer.function = start_net;
- } else {
- dev_dbg(&link->dev,
- "ray_cs interrupt network \"%s\" join failed\n",
- memtmp);
- local->timer.function = join_net;
- }
- add_timer(&local->timer);
- }
- break;
- case CCS_START_ASSOCIATION:
- if (status == CCS_COMMAND_COMPLETE) {
- local->card_status = CARD_ASSOC_COMPLETE;
- dev_dbg(&link->dev, "ray_cs association successful\n");
- } else {
- dev_dbg(&link->dev, "ray_cs association failed,\n");
- local->card_status = CARD_ASSOC_FAILED;
- join_net(&local->timer);
- }
- break;
- case CCS_TX_REQUEST:
- if (status == CCS_COMMAND_COMPLETE) {
- dev_dbg(&link->dev,
- "ray_cs interrupt tx request complete\n");
- } else {
- dev_dbg(&link->dev,
- "ray_cs interrupt tx request failed\n");
- }
- if (!sniffer)
- netif_start_queue(dev);
- netif_wake_queue(dev);
- break;
- case CCS_TEST_MEMORY:
- dev_dbg(&link->dev, "ray_cs interrupt mem test done\n");
- break;
- case CCS_SHUTDOWN:
- dev_dbg(&link->dev,
- "ray_cs interrupt Unexpected CCS returned - Shutdown\n");
- break;
- case CCS_DUMP_MEMORY:
- dev_dbg(&link->dev, "ray_cs interrupt dump memory done\n");
- break;
- case CCS_START_TIMER:
- dev_dbg(&link->dev,
- "ray_cs interrupt DING - raylink timer expired\n");
- break;
- default:
- dev_dbg(&link->dev,
- "ray_cs interrupt Unexpected CCS 0x%x returned 0x%x\n",
- rcsindex, cmd);
- }
- writeb(CCS_BUFFER_FREE, &pccs->buffer_status);
- } else { /* It's an RCS */
-
- prcs = rcs_base(local) + rcsindex;
-
- switch (readb(&prcs->interrupt_id)) {
- case PROCESS_RX_PACKET:
- ray_rx(dev, local, prcs);
- break;
- case REJOIN_NET_COMPLETE:
- dev_dbg(&link->dev, "ray_cs interrupt rejoin net complete\n");
- local->card_status = CARD_ACQ_COMPLETE;
- /* do we need to clear tx buffers CCS's? */
- if (local->sparm.b4.a_network_type == ADHOC) {
- if (!sniffer)
- netif_start_queue(dev);
- } else {
- memcpy_fromio(&local->bss_id,
- prcs->var.rejoin_net_complete.
- bssid, ADDRLEN);
- dev_dbg(&link->dev, "ray_cs new BSSID = %pm\n",
- local->bss_id);
- if (!sniffer)
- authenticate(local);
- }
- break;
- case ROAMING_INITIATED:
- dev_dbg(&link->dev, "ray_cs interrupt roaming initiated\n");
- netif_stop_queue(dev);
- local->card_status = CARD_DOING_ACQ;
- break;
- case JAPAN_CALL_SIGN_RXD:
- dev_dbg(&link->dev, "ray_cs interrupt japan call sign rx\n");
- break;
- default:
- dev_dbg(&link->dev,
- "ray_cs Unexpected interrupt for RCS 0x%x cmd = 0x%x\n",
- rcsindex,
- (unsigned int)readb(&prcs->interrupt_id));
- break;
- }
- writeb(CCS_BUFFER_FREE, &prcs->buffer_status);
- }
- clear_interrupt(local);
- return IRQ_HANDLED;
-} /* ray_interrupt */
-
-/*===========================================================================*/
-static void ray_rx(struct net_device *dev, ray_dev_t *local,
- struct rcs __iomem *prcs)
-{
- int rx_len;
- unsigned int pkt_addr;
- void __iomem *pmsg;
- pr_debug("ray_rx process rx packet\n");
-
- /* Calculate address of packet within Rx buffer */
- pkt_addr = ((readb(&prcs->var.rx_packet.rx_data_ptr[0]) << 8)
- + readb(&prcs->var.rx_packet.rx_data_ptr[1])) & RX_BUFF_END;
- /* Length of first packet fragment */
- rx_len = (readb(&prcs->var.rx_packet.rx_data_length[0]) << 8)
- + readb(&prcs->var.rx_packet.rx_data_length[1]);
-
- local->last_rsl = readb(&prcs->var.rx_packet.rx_sig_lev);
- pmsg = local->rmem + pkt_addr;
- switch (readb(pmsg)) {
- case DATA_TYPE:
- pr_debug("ray_rx data type\n");
- rx_data(dev, prcs, pkt_addr, rx_len);
- break;
- case AUTHENTIC_TYPE:
- pr_debug("ray_rx authentic type\n");
- if (sniffer)
- rx_data(dev, prcs, pkt_addr, rx_len);
- else
- rx_authenticate(local, prcs, pkt_addr, rx_len);
- break;
- case DEAUTHENTIC_TYPE:
- pr_debug("ray_rx deauth type\n");
- if (sniffer)
- rx_data(dev, prcs, pkt_addr, rx_len);
- else
- rx_deauthenticate(local, prcs, pkt_addr, rx_len);
- break;
- case NULL_MSG_TYPE:
- pr_debug("ray_cs rx NULL msg\n");
- break;
- case BEACON_TYPE:
- pr_debug("ray_rx beacon type\n");
- if (sniffer)
- rx_data(dev, prcs, pkt_addr, rx_len);
-
- copy_from_rx_buff(local, (UCHAR *) &local->last_bcn, pkt_addr,
- rx_len < sizeof(struct beacon_rx) ?
- rx_len : sizeof(struct beacon_rx));
-
- local->beacon_rxed = 1;
- /* Get the statistics so the card counters never overflow */
- ray_get_stats(dev);
- break;
- default:
- pr_debug("ray_cs unknown pkt type %2x\n",
- (unsigned int)readb(pmsg));
- break;
- }
-
-} /* end ray_rx */
-
-/*===========================================================================*/
-static void rx_data(struct net_device *dev, struct rcs __iomem *prcs,
- unsigned int pkt_addr, int rx_len)
-{
- struct sk_buff *skb = NULL;
- struct rcs __iomem *prcslink = prcs;
- ray_dev_t *local = netdev_priv(dev);
- UCHAR *rx_ptr;
- int total_len;
- int tmp;
-#ifdef WIRELESS_SPY
- int siglev = local->last_rsl;
- u_char linksrcaddr[ETH_ALEN]; /* Other end of the wireless link */
-#endif
-
- if (!sniffer) {
- if (translate) {
-/* TBD length needs fixing for translated header */
- if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
- rx_len >
- (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
- FCS_LEN)) {
- pr_debug(
- "ray_cs invalid packet length %d received\n",
- rx_len);
- return;
- }
- } else { /* encapsulated ethernet */
-
- if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
- rx_len >
- (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN +
- FCS_LEN)) {
- pr_debug(
- "ray_cs invalid packet length %d received\n",
- rx_len);
- return;
- }
- }
- }
- pr_debug("ray_cs rx_data packet\n");
- /* If fragmented packet, verify sizes of fragments add up */
- if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
- pr_debug("ray_cs rx'ed fragment\n");
- tmp = (readb(&prcs->var.rx_packet.totalpacketlength[0]) << 8)
- + readb(&prcs->var.rx_packet.totalpacketlength[1]);
- total_len = tmp;
- prcslink = prcs;
- do {
- tmp -=
- (readb(&prcslink->var.rx_packet.rx_data_length[0])
- << 8)
- + readb(&prcslink->var.rx_packet.rx_data_length[1]);
- if (readb(&prcslink->var.rx_packet.next_frag_rcs_index)
- == 0xFF || tmp < 0)
- break;
- prcslink = rcs_base(local)
- + readb(&prcslink->link_field);
- } while (1);
-
- if (tmp < 0) {
- pr_debug(
- "ray_cs rx_data fragment lengths don't add up\n");
- local->stats.rx_dropped++;
- release_frag_chain(local, prcs);
- return;
- }
- } else { /* Single unfragmented packet */
- total_len = rx_len;
- }
-
- skb = dev_alloc_skb(total_len + 5);
- if (skb == NULL) {
- pr_debug("ray_cs rx_data could not allocate skb\n");
- local->stats.rx_dropped++;
- if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF)
- release_frag_chain(local, prcs);
- return;
- }
- skb_reserve(skb, 2); /* Align IP on 16 byte (TBD check this) */
-
- pr_debug("ray_cs rx_data total_len = %x, rx_len = %x\n", total_len,
- rx_len);
-
-/************************/
- /* Reserve enough room for the whole damn packet. */
- rx_ptr = skb_put(skb, total_len);
- /* Copy the whole packet to sk_buff */
- rx_ptr +=
- copy_from_rx_buff(local, rx_ptr, pkt_addr & RX_BUFF_END, rx_len);
- /* Get source address */
-#ifdef WIRELESS_SPY
- skb_copy_from_linear_data_offset(skb,
- offsetof(struct mac_header, addr_2),
- linksrcaddr, ETH_ALEN);
-#endif
- /* Now, deal with encapsulation/translation/sniffer */
- if (!sniffer) {
- if (!translate) {
- /* Encapsulated ethernet, so just lop off 802.11 MAC header */
-/* TBD reserve skb_reserve( skb, RX_MAC_HEADER_LENGTH); */
- skb_pull(skb, RX_MAC_HEADER_LENGTH);
- } else {
- /* Do translation */
- untranslate(local, skb, total_len);
- }
- } else { /* sniffer mode, so just pass whole packet */
- }
-
-/************************/
- /* Now pick up the rest of the fragments if any */
- tmp = 17;
- if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
- prcslink = prcs;
- pr_debug("ray_cs rx_data in fragment loop\n");
- do {
- prcslink = rcs_base(local)
- +
- readb(&prcslink->var.rx_packet.next_frag_rcs_index);
- rx_len =
- ((readb(&prcslink->var.rx_packet.rx_data_length[0])
- << 8)
- +
- readb(&prcslink->var.rx_packet.rx_data_length[1]))
- & RX_BUFF_END;
- pkt_addr =
- ((readb(&prcslink->var.rx_packet.rx_data_ptr[0]) <<
- 8)
- + readb(&prcslink->var.rx_packet.rx_data_ptr[1]))
- & RX_BUFF_END;
-
- rx_ptr +=
- copy_from_rx_buff(local, rx_ptr, pkt_addr, rx_len);
-
- } while (tmp-- &&
- readb(&prcslink->var.rx_packet.next_frag_rcs_index) !=
- 0xFF);
- release_frag_chain(local, prcs);
- }
-
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- local->stats.rx_packets++;
- local->stats.rx_bytes += total_len;
-
- /* Gather signal strength per address */
-#ifdef WIRELESS_SPY
- /* For the Access Point or the node having started the ad-hoc net
- * note : ad-hoc work only in some specific configurations, but we
- * kludge in ray_get_wireless_stats... */
- if (!memcmp(linksrcaddr, local->bss_id, ETH_ALEN)) {
- /* Update statistics */
- /*local->wstats.qual.qual = none ? */
- local->wstats.qual.level = siglev;
- /*local->wstats.qual.noise = none ? */
- local->wstats.qual.updated = 0x2;
- }
- /* Now, update the spy stuff */
- {
- struct iw_quality wstats;
- wstats.level = siglev;
- /* wstats.noise = none ? */
- /* wstats.qual = none ? */
- wstats.updated = 0x2;
- /* Update spy records */
- wireless_spy_update(dev, linksrcaddr, &wstats);
- }
-#endif /* WIRELESS_SPY */
-} /* end rx_data */
-
-/*===========================================================================*/
-static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
-{
- snaphdr_t *psnap = (snaphdr_t *) (skb->data + RX_MAC_HEADER_LENGTH);
- struct ieee80211_hdr *pmac = (struct ieee80211_hdr *)skb->data;
- __be16 type = *(__be16 *) psnap->ethertype;
- int delta;
- struct ethhdr *peth;
- UCHAR srcaddr[ADDRLEN];
- UCHAR destaddr[ADDRLEN];
- static const UCHAR org_bridge[3] = { 0, 0, 0xf8 };
- static const UCHAR org_1042[3] = { 0, 0, 0 };
-
- memcpy(destaddr, ieee80211_get_DA(pmac), ADDRLEN);
- memcpy(srcaddr, ieee80211_get_SA(pmac), ADDRLEN);
-
-#if 0
- if {
- print_hex_dump(KERN_DEBUG, "skb->data before untranslate: ",
- DUMP_PREFIX_NONE, 16, 1,
- skb->data, 64, true);
- printk(KERN_DEBUG
- "type = %08x, xsap = %02x%02x%02x, org = %02x02x02x\n",
- ntohs(type), psnap->dsap, psnap->ssap, psnap->ctrl,
- psnap->org[0], psnap->org[1], psnap->org[2]);
- printk(KERN_DEBUG "untranslate skb->data = %p\n", skb->data);
- }
-#endif
-
- if (psnap->dsap != 0xaa || psnap->ssap != 0xaa || psnap->ctrl != 3) {
- /* not a snap type so leave it alone */
- pr_debug("ray_cs untranslate NOT SNAP %02x %02x %02x\n",
- psnap->dsap, psnap->ssap, psnap->ctrl);
-
- delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
- peth = (struct ethhdr *)(skb->data + delta);
- peth->h_proto = htons(len - RX_MAC_HEADER_LENGTH);
- } else { /* Its a SNAP */
- if (memcmp(psnap->org, org_bridge, 3) == 0) {
- /* EtherII and nuke the LLC */
- pr_debug("ray_cs untranslate Bridge encap\n");
- delta = RX_MAC_HEADER_LENGTH
- + sizeof(struct snaphdr_t) - ETH_HLEN;
- peth = (struct ethhdr *)(skb->data + delta);
- peth->h_proto = type;
- } else if (memcmp(psnap->org, org_1042, 3) == 0) {
- switch (ntohs(type)) {
- case ETH_P_IPX:
- case ETH_P_AARP:
- pr_debug("ray_cs untranslate RFC IPX/AARP\n");
- delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
- peth = (struct ethhdr *)(skb->data + delta);
- peth->h_proto =
- htons(len - RX_MAC_HEADER_LENGTH);
- break;
- default:
- pr_debug("ray_cs untranslate RFC default\n");
- delta = RX_MAC_HEADER_LENGTH +
- sizeof(struct snaphdr_t) - ETH_HLEN;
- peth = (struct ethhdr *)(skb->data + delta);
- peth->h_proto = type;
- break;
- }
- } else {
- printk("ray_cs untranslate very confused by packet\n");
- delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
- peth = (struct ethhdr *)(skb->data + delta);
- peth->h_proto = type;
- }
- }
-/* TBD reserve skb_reserve(skb, delta); */
- skb_pull(skb, delta);
- pr_debug("untranslate after skb_pull(%d), skb->data = %p\n", delta,
- skb->data);
- memcpy(peth->h_dest, destaddr, ADDRLEN);
- memcpy(peth->h_source, srcaddr, ADDRLEN);
-#if 0
- {
- int i;
- printk(KERN_DEBUG "skb->data after untranslate:");
- for (i = 0; i < 64; i++)
- printk("%02x ", skb->data[i]);
- printk("\n");
- }
-#endif
-} /* end untranslate */
-
-/*===========================================================================*/
-/* Copy data from circular receive buffer to PC memory.
- * dest = destination address in PC memory
- * pkt_addr = source address in receive buffer
- * len = length of packet to copy
- */
-static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr,
- int length)
-{
- int wrap_bytes = (pkt_addr + length) - (RX_BUFF_END + 1);
- if (wrap_bytes <= 0) {
- memcpy_fromio(dest, local->rmem + pkt_addr, length);
- } else { /* Packet wrapped in circular buffer */
-
- memcpy_fromio(dest, local->rmem + pkt_addr,
- length - wrap_bytes);
- memcpy_fromio(dest + length - wrap_bytes, local->rmem,
- wrap_bytes);
- }
- return length;
-}
-
-/*===========================================================================*/
-static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs)
-{
- struct rcs __iomem *prcslink = prcs;
- int tmp = 17;
- unsigned rcsindex = readb(&prcs->var.rx_packet.next_frag_rcs_index);
-
- while (tmp--) {
- writeb(CCS_BUFFER_FREE, &prcslink->buffer_status);
- if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
- pr_debug("ray_cs interrupt bad rcsindex = 0x%x\n",
- rcsindex);
- break;
- }
- prcslink = rcs_base(local) + rcsindex;
- rcsindex = readb(&prcslink->var.rx_packet.next_frag_rcs_index);
- }
- writeb(CCS_BUFFER_FREE, &prcslink->buffer_status);
-}
-
-/*===========================================================================*/
-static void authenticate(ray_dev_t *local)
-{
- struct pcmcia_device *link = local->finder;
- dev_dbg(&link->dev, "ray_cs Starting authentication.\n");
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs authenticate - device not present\n");
- return;
- }
-
- del_timer(&local->timer);
- if (build_auth_frame(local, local->bss_id, OPEN_AUTH_REQUEST)) {
- local->timer.function = join_net;
- } else {
- local->timer.function = authenticate_timeout;
- }
- local->timer.expires = jiffies + HZ * 2;
- add_timer(&local->timer);
- local->authentication_state = AWAITING_RESPONSE;
-} /* end authenticate */
-
-/*===========================================================================*/
-static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
- unsigned int pkt_addr, int rx_len)
-{
- UCHAR buff[256];
- struct ray_rx_msg *msg = (struct ray_rx_msg *) buff;
-
- del_timer(&local->timer);
-
- copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
- /* if we are trying to get authenticated */
- if (local->sparm.b4.a_network_type == ADHOC) {
- pr_debug("ray_cs rx_auth var= %6ph\n", msg->var);
- if (msg->var[2] == 1) {
- pr_debug("ray_cs Sending authentication response.\n");
- if (!build_auth_frame
- (local, msg->mac.addr_2, OPEN_AUTH_RESPONSE)) {
- local->authentication_state = NEED_TO_AUTH;
- memcpy(local->auth_id, msg->mac.addr_2,
- ADDRLEN);
- }
- }
- } else { /* Infrastructure network */
-
- if (local->authentication_state == AWAITING_RESPONSE) {
- /* Verify authentication sequence #2 and success */
- if (msg->var[2] == 2) {
- if ((msg->var[3] | msg->var[4]) == 0) {
- pr_debug("Authentication successful\n");
- local->card_status = CARD_AUTH_COMPLETE;
- associate(local);
- local->authentication_state =
- AUTHENTICATED;
- } else {
- pr_debug("Authentication refused\n");
- local->card_status = CARD_AUTH_REFUSED;
- join_net(&local->timer);
- local->authentication_state =
- UNAUTHENTICATED;
- }
- }
- }
- }
-
-} /* end rx_authenticate */
-
-/*===========================================================================*/
-static void associate(ray_dev_t *local)
-{
- struct ccs __iomem *pccs;
- struct pcmcia_device *link = local->finder;
- struct net_device *dev = link->priv;
- int ccsindex;
- if (!(pcmcia_dev_present(link))) {
- dev_dbg(&link->dev, "ray_cs associate - device not present\n");
- return;
- }
- /* If no tx buffers available, return */
- if ((ccsindex = get_free_ccs(local)) < 0) {
-/* TBD should never be here but... what if we are? */
- dev_dbg(&link->dev, "ray_cs associate - No free ccs\n");
- return;
- }
- dev_dbg(&link->dev, "ray_cs Starting association with access point\n");
- pccs = ccs_base(local) + ccsindex;
- /* fill in the CCS */
- writeb(CCS_START_ASSOCIATION, &pccs->cmd);
- /* Interrupt the firmware to process the command */
- if (interrupt_ecf(local, ccsindex)) {
- dev_dbg(&link->dev, "ray_cs associate failed - ECF not ready for intr\n");
- writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
-
- del_timer(&local->timer);
- local->timer.expires = jiffies + HZ * 2;
- local->timer.function = join_net;
- add_timer(&local->timer);
- local->card_status = CARD_ASSOC_FAILED;
- return;
- }
- if (!sniffer)
- netif_start_queue(dev);
-
-} /* end associate */
-
-/*===========================================================================*/
-static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
- unsigned int pkt_addr, int rx_len)
-{
-/* UCHAR buff[256];
- struct ray_rx_msg *msg = (struct ray_rx_msg *) buff;
-*/
- pr_debug("Deauthentication frame received\n");
- local->authentication_state = UNAUTHENTICATED;
- /* Need to reauthenticate or rejoin depending on reason code */
-/* copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
- */
-}
-
-/*===========================================================================*/
-static void clear_interrupt(ray_dev_t *local)
-{
- writeb(0, local->amem + CIS_OFFSET + HCS_INTR_OFFSET);
-}
-
-/*===========================================================================*/
-#ifdef CONFIG_PROC_FS
-#define MAXDATA (PAGE_SIZE - 80)
-
-static const char *card_status[] = {
- "Card inserted - uninitialized", /* 0 */
- "Card not downloaded", /* 1 */
- "Waiting for download parameters", /* 2 */
- "Card doing acquisition", /* 3 */
- "Acquisition complete", /* 4 */
- "Authentication complete", /* 5 */
- "Association complete", /* 6 */
- "???", "???", "???", "???", /* 7 8 9 10 undefined */
- "Card init error", /* 11 */
- "Download parameters error", /* 12 */
- "???", /* 13 */
- "Acquisition failed", /* 14 */
- "Authentication refused", /* 15 */
- "Association failed" /* 16 */
-};
-
-static const char *nettype[] = { "Adhoc", "Infra " };
-static const char *framing[] = { "Encapsulation", "Translation" }
-
-;
-/*===========================================================================*/
-static int ray_cs_proc_show(struct seq_file *m, void *v)
-{
-/* Print current values which are not available via other means
- * eg ifconfig
- */
- int i;
- struct pcmcia_device *link;
- struct net_device *dev;
- ray_dev_t *local;
- UCHAR *p;
- struct freq_hop_element *pfh;
- UCHAR c[33];
-
- link = this_device;
- if (!link)
- return 0;
- dev = (struct net_device *)link->priv;
- if (!dev)
- return 0;
- local = netdev_priv(dev);
- if (!local)
- return 0;
-
- seq_puts(m, "Raylink Wireless LAN driver status\n");
- seq_printf(m, "%s\n", rcsid);
- /* build 4 does not report version, and field is 0x55 after memtest */
- seq_puts(m, "Firmware version = ");
- if (local->fw_ver == 0x55)
- seq_puts(m, "4 - Use dump_cis for more details\n");
- else
- seq_printf(m, "%2d.%02d.%02d\n",
- local->fw_ver, local->fw_bld, local->fw_var);
-
- for (i = 0; i < 32; i++)
- c[i] = local->sparm.b5.a_current_ess_id[i];
- c[32] = 0;
- seq_printf(m, "%s network ESSID = \"%s\"\n",
- nettype[local->sparm.b5.a_network_type], c);
-
- p = local->bss_id;
- seq_printf(m, "BSSID = %pM\n", p);
-
- seq_printf(m, "Country code = %d\n",
- local->sparm.b5.a_curr_country_code);
-
- i = local->card_status;
- if (i < 0)
- i = 10;
- if (i > 16)
- i = 10;
- seq_printf(m, "Card status = %s\n", card_status[i]);
-
- seq_printf(m, "Framing mode = %s\n", framing[translate]);
-
- seq_printf(m, "Last pkt signal lvl = %d\n", local->last_rsl);
-
- if (local->beacon_rxed) {
- /* Pull some fields out of last beacon received */
- seq_printf(m, "Beacon Interval = %d Kus\n",
- local->last_bcn.beacon_intvl[0]
- + 256 * local->last_bcn.beacon_intvl[1]);
-
- p = local->last_bcn.elements;
- if (p[0] == C_ESSID_ELEMENT_ID)
- p += p[1] + 2;
- else {
- seq_printf(m,
- "Parse beacon failed at essid element id = %d\n",
- p[0]);
- return 0;
- }
-
- if (p[0] == C_SUPPORTED_RATES_ELEMENT_ID) {
- seq_puts(m, "Supported rate codes = ");
- for (i = 2; i < p[1] + 2; i++)
- seq_printf(m, "0x%02x ", p[i]);
- seq_putc(m, '\n');
- p += p[1] + 2;
- } else {
- seq_puts(m, "Parse beacon failed at rates element\n");
- return 0;
- }
-
- if (p[0] == C_FH_PARAM_SET_ELEMENT_ID) {
- pfh = (struct freq_hop_element *)p;
- seq_printf(m, "Hop dwell = %d Kus\n",
- pfh->dwell_time[0] +
- 256 * pfh->dwell_time[1]);
- seq_printf(m, "Hop set = %d\n",
- pfh->hop_set);
- seq_printf(m, "Hop pattern = %d\n",
- pfh->hop_pattern);
- seq_printf(m, "Hop index = %d\n",
- pfh->hop_index);
- p += p[1] + 2;
- } else {
- seq_puts(m,
- "Parse beacon failed at FH param element\n");
- return 0;
- }
- } else {
- seq_puts(m, "No beacons received\n");
- }
- return 0;
-}
-#endif
-/*===========================================================================*/
-static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type)
-{
- int addr;
- struct ccs __iomem *pccs;
- struct tx_msg __iomem *ptx;
- int ccsindex;
-
- /* If no tx buffers available, return */
- if ((ccsindex = get_free_tx_ccs(local)) < 0) {
- pr_debug("ray_cs send authenticate - No free tx ccs\n");
- return -1;
- }
-
- pccs = ccs_base(local) + ccsindex;
-
- /* Address in card space */
- addr = TX_BUF_BASE + (ccsindex << 11);
- /* fill in the CCS */
- writeb(CCS_TX_REQUEST, &pccs->cmd);
- writeb(addr >> 8, pccs->var.tx_request.tx_data_ptr);
- writeb(0x20, pccs->var.tx_request.tx_data_ptr + 1);
- writeb(TX_AUTHENTICATE_LENGTH_MSB, pccs->var.tx_request.tx_data_length);
- writeb(TX_AUTHENTICATE_LENGTH_LSB,
- pccs->var.tx_request.tx_data_length + 1);
- writeb(0, &pccs->var.tx_request.pow_sav_mode);
-
- ptx = local->sram + addr;
- /* fill in the mac header */
- writeb(PROTOCOL_VER | AUTHENTIC_TYPE, &ptx->mac.frame_ctl_1);
- writeb(0, &ptx->mac.frame_ctl_2);
-
- memcpy_toio(ptx->mac.addr_1, dest, ADDRLEN);
- memcpy_toio(ptx->mac.addr_2, local->sparm.b4.a_mac_addr, ADDRLEN);
- memcpy_toio(ptx->mac.addr_3, local->bss_id, ADDRLEN);
-
- /* Fill in msg body with protocol 00 00, sequence 01 00 ,status 00 00 */
- memset_io(ptx->var, 0, 6);
- writeb(auth_type & 0xff, ptx->var + 2);
-
- /* Interrupt the firmware to process the command */
- if (interrupt_ecf(local, ccsindex)) {
- pr_debug(
- "ray_cs send authentication request failed - ECF not ready for intr\n");
- writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
- return -1;
- }
- return 0;
-} /* End build_auth_frame */
-
-/*===========================================================================*/
-#ifdef CONFIG_PROC_FS
-static ssize_t ray_cs_essid_proc_write(struct file *file,
- const char __user *buffer, size_t count, loff_t *pos)
-{
- static char proc_essid[33];
- unsigned int len = count;
-
- if (len > 32)
- len = 32;
- memset(proc_essid, 0, 33);
- if (copy_from_user(proc_essid, buffer, len))
- return -EFAULT;
- essid = proc_essid;
- return count;
-}
-
-static const struct proc_ops ray_cs_essid_proc_ops = {
- .proc_write = ray_cs_essid_proc_write,
- .proc_lseek = noop_llseek,
-};
-
-static ssize_t int_proc_write(struct file *file, const char __user *buffer,
- size_t count, loff_t *pos)
-{
- static char proc_number[10];
- char *p;
- int nr, len;
-
- if (!count)
- return 0;
-
- if (count > 9)
- return -EINVAL;
- if (copy_from_user(proc_number, buffer, count))
- return -EFAULT;
- p = proc_number;
- nr = 0;
- len = count;
- do {
- unsigned int c = *p - '0';
- if (c > 9)
- return -EINVAL;
- nr = nr * 10 + c;
- p++;
- } while (--len);
- *(int *)pde_data(file_inode(file)) = nr;
- return count;
-}
-
-static const struct proc_ops int_proc_ops = {
- .proc_write = int_proc_write,
- .proc_lseek = noop_llseek,
-};
-#endif
-
-static const struct pcmcia_device_id ray_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x01a6, 0x0000),
- PCMCIA_DEVICE_NULL,
-};
-
-MODULE_DEVICE_TABLE(pcmcia, ray_ids);
-
-static struct pcmcia_driver ray_driver = {
- .owner = THIS_MODULE,
- .name = "ray_cs",
- .probe = ray_probe,
- .remove = ray_detach,
- .id_table = ray_ids,
- .suspend = ray_suspend,
- .resume = ray_resume,
-};
-
-static int __init init_ray_cs(void)
-{
- int rc;
-
- pr_debug("%s\n", rcsid);
- rc = pcmcia_register_driver(&ray_driver);
- pr_debug("raylink init_module register_pcmcia_driver returns 0x%x\n",
- rc);
- if (rc)
- return rc;
-
-#ifdef CONFIG_PROC_FS
- proc_mkdir("driver/ray_cs", NULL);
-
- proc_create_single("driver/ray_cs/ray_cs", 0, NULL, ray_cs_proc_show);
- proc_create("driver/ray_cs/essid", 0200, NULL, &ray_cs_essid_proc_ops);
- proc_create_data("driver/ray_cs/net_type", 0200, NULL, &int_proc_ops,
- &net_type);
- proc_create_data("driver/ray_cs/translate", 0200, NULL, &int_proc_ops,
- &translate);
-#endif
- translate = !!translate;
- return 0;
-} /* init_ray_cs */
-
-/*===========================================================================*/
-
-static void __exit exit_ray_cs(void)
-{
- pr_debug("ray_cs: cleanup_module\n");
-
-#ifdef CONFIG_PROC_FS
- remove_proc_subtree("driver/ray_cs", NULL);
-#endif
-
- pcmcia_unregister_driver(&ray_driver);
-} /* exit_ray_cs */
-
-module_init(init_ray_cs);
-module_exit(exit_ray_cs);
-
-/*===========================================================================*/
diff --git a/drivers/net/wireless/legacy/ray_cs.h b/drivers/net/wireless/legacy/ray_cs.h
deleted file mode 100644
index 0609d86250192..0000000000000
--- a/drivers/net/wireless/legacy/ray_cs.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Raytheon wireless LAN PCMCIA card driver for Linux
- A PCMCIA client driver for the Raylink wireless network card
- Written by Corey Thomas
-*/
-
-#ifndef _RAY_CS_H_
-#define _RAY_CS_H_
-
-struct beacon_rx {
- struct mac_header mac;
- UCHAR timestamp[8];
- UCHAR beacon_intvl[2];
- UCHAR capability[2];
- UCHAR elements[sizeof(struct essid_element)
- + sizeof(struct rates_element)
- + sizeof(struct freq_hop_element)
- + sizeof(struct japan_call_sign_element)
- + sizeof(struct tim_element)];
-};
-
-/* Return values for get_free{,_tx}_ccs */
-#define ECCSFULL (-1)
-#define ECCSBUSY (-2)
-#define ECARDGONE (-3)
-
-typedef struct ray_dev_t {
- int card_status;
- int authentication_state;
- void __iomem *sram; /* pointer to beginning of shared RAM */
- void __iomem *amem; /* pointer to attribute mem window */
- void __iomem *rmem; /* pointer to receive buffer window */
- struct pcmcia_device *finder; /* pointer back to struct pcmcia_device for card */
- struct timer_list timer;
- unsigned long tx_ccs_lock;
- unsigned long ccs_lock;
- int dl_param_ccs;
- union {
- struct b4_startup_params b4;
- struct b5_startup_params b5;
- } sparm;
- int timeout_flag;
- UCHAR supported_rates[8];
- UCHAR japan_call_sign[12];
- struct startup_res_6 startup_res;
- int num_multi;
- /* Network parameters from start/join */
- UCHAR bss_id[6];
- UCHAR auth_id[6];
- UCHAR net_default_tx_rate;
- UCHAR encryption;
- struct net_device_stats stats;
-
- UCHAR net_type;
- UCHAR sta_type;
- UCHAR fw_ver;
- UCHAR fw_bld;
- UCHAR fw_var;
- UCHAR ASIC_version;
- UCHAR assoc_id[2];
- UCHAR tib_length;
- UCHAR last_rsl;
- int beacon_rxed;
- struct beacon_rx last_bcn;
- iw_stats wstats; /* Wireless specific stats */
-#ifdef WIRELESS_SPY
- struct iw_spy_data spy_data;
- struct iw_public_data wireless_data;
-#endif /* WIRELESS_SPY */
-
-} ray_dev_t;
-/*****************************************************************************/
-
-#endif /* _RAY_CS_H_ */
diff --git a/drivers/net/wireless/legacy/rayctl.h b/drivers/net/wireless/legacy/rayctl.h
deleted file mode 100644
index 1f3bde8ac73d4..0000000000000
--- a/drivers/net/wireless/legacy/rayctl.h
+++ /dev/null
@@ -1,734 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _RAYCTL_H_
-#define _RAYCTL_H_
-
-typedef unsigned char UCHAR;
-
-/****** IEEE 802.11 constants ************************************************/
-#define ADDRLEN 6
-/* Frame control 1 bit fields */
-#define PROTOCOL_VER 0x00
-#define DATA_TYPE 0x08
-#define ASSOC_REQ_TYPE 0x00
-#define ASSOC_RESP_TYPE 0x10
-#define REASSOC_REQ_TYPE 0x20
-#define REASSOC_RESP_TYPE 0x30
-#define NULL_MSG_TYPE 0x48
-#define BEACON_TYPE 0x80
-#define DISASSOC_TYPE 0xA0
-#define PSPOLL_TYPE 0xA4
-#define AUTHENTIC_TYPE 0xB0
-#define DEAUTHENTIC_TYPE 0xC0
-/* Frame control 2 bit fields */
-#define FC2_TO_DS 0x01
-#define FC2_FROM_DS 0x02
-#define FC2_MORE_FRAG 0x04
-#define FC2_RETRY 0x08
-#define FC2_PSM 0x10
-#define FC2_MORE_DATA 0x20
-#define FC2_WEP 0x40
-#define FC2_ORDER 0x80
-/*****************************************************************************/
-/* 802.11 element ID's and lengths */
-#define C_BP_CAPABILITY_ESS 0x01
-#define C_BP_CAPABILITY_IBSS 0x02
-#define C_BP_CAPABILITY_CF_POLLABLE 0x04
-#define C_BP_CAPABILITY_CF_POLL_REQUEST 0x08
-#define C_BP_CAPABILITY_PRIVACY 0x10
-
-#define C_ESSID_ELEMENT_ID 0
-#define C_ESSID_ELEMENT_MAX_LENGTH 32
-
-#define C_SUPPORTED_RATES_ELEMENT_ID 1
-#define C_SUPPORTED_RATES_ELEMENT_LENGTH 2
-
-#define C_FH_PARAM_SET_ELEMENT_ID 2
-#define C_FH_PARAM_SET_ELEMENT_LNGTH 5
-
-#define C_CF_PARAM_SET_ELEMENT_ID 4
-#define C_CF_PARAM_SET_ELEMENT_LNGTH 6
-
-#define C_TIM_ELEMENT_ID 5
-#define C_TIM_BITMAP_LENGTH 251
-#define C_TIM_BMCAST_BIT 0x01
-
-#define C_IBSS_ELEMENT_ID 6
-#define C_IBSS_ELEMENT_LENGTH 2
-
-#define C_JAPAN_CALL_SIGN_ELEMENT_ID 51
-#define C_JAPAN_CALL_SIGN_ELEMENT_LNGTH 12
-
-#define C_DISASSOC_REASON_CODE_LEN 2
-#define C_DISASSOC_REASON_CODE_DEFAULT 8
-
-#define C_CRC_LEN 4
-#define C_NUM_SUPPORTED_RATES 8
-/****** IEEE 802.11 mac header for type data packets *************************/
-struct mac_header {
- UCHAR frame_ctl_1;
- UCHAR frame_ctl_2;
- UCHAR duration_lsb;
- UCHAR duration_msb;
- UCHAR addr_1[ADDRLEN];
- UCHAR addr_2[ADDRLEN];
- UCHAR addr_3[ADDRLEN];
- UCHAR seq_frag_num[2];
-/* UCHAR addr_4[ADDRLEN]; *//* only present for AP to AP (TO DS and FROM DS */
-};
-/****** IEEE 802.11 frame element structures *********************************/
-struct essid_element
-{
- UCHAR id;
- UCHAR length;
- UCHAR text[C_ESSID_ELEMENT_MAX_LENGTH];
-};
-struct rates_element
-{
- UCHAR id;
- UCHAR length;
- UCHAR value[8];
-};
-struct freq_hop_element
-{
- UCHAR id;
- UCHAR length;
- UCHAR dwell_time[2];
- UCHAR hop_set;
- UCHAR hop_pattern;
- UCHAR hop_index;
-};
-struct tim_element
-{
- UCHAR id;
- UCHAR length;
- UCHAR dtim_count;
- UCHAR dtim_period;
- UCHAR bitmap_control;
- UCHAR tim[C_TIM_BITMAP_LENGTH];
-};
-struct ibss_element
-{
- UCHAR id;
- UCHAR length;
- UCHAR atim_window[2];
-};
-struct japan_call_sign_element
-{
- UCHAR id;
- UCHAR length;
- UCHAR call_sign[12];
-};
-/****** Beacon message structures ********************************************/
-/* .elements is a large lump of max size because elements are variable size */
-struct infra_beacon
-{
- UCHAR timestamp[8];
- UCHAR beacon_intvl[2];
- UCHAR capability[2];
- UCHAR elements[sizeof(struct essid_element)
- + sizeof(struct rates_element)
- + sizeof(struct freq_hop_element)
- + sizeof(struct japan_call_sign_element)
- + sizeof(struct tim_element)];
-};
-struct adhoc_beacon
-{
- UCHAR timestamp[8];
- UCHAR beacon_intvl[2];
- UCHAR capability[2];
- UCHAR elements[sizeof(struct essid_element)
- + sizeof(struct rates_element)
- + sizeof(struct freq_hop_element)
- + sizeof(struct japan_call_sign_element)
- + sizeof(struct ibss_element)];
-};
-/*****************************************************************************/
-/*****************************************************************************/
-/* #define C_MAC_HDR_2_WEP 0x40 */
-/* TX/RX CCS constants */
-#define TX_HEADER_LENGTH 0x1C
-#define RX_MAC_HEADER_LENGTH 0x18
-#define TX_AUTHENTICATE_LENGTH (TX_HEADER_LENGTH + 6)
-#define TX_AUTHENTICATE_LENGTH_MSB (TX_AUTHENTICATE_LENGTH >> 8)
-#define TX_AUTHENTICATE_LENGTH_LSB (TX_AUTHENTICATE_LENGTH & 0xff)
-#define TX_DEAUTHENTICATE_LENGTH (TX_HEADER_LENGTH + 2)
-#define TX_DEAUTHENTICATE_LENGTH_MSB (TX_AUTHENTICATE_LENGTH >> 8)
-#define TX_DEAUTHENTICATE_LENGTH_LSB (TX_AUTHENTICATE_LENGTH & 0xff)
-#define FCS_LEN 4
-
-#define ADHOC 0
-#define INFRA 1
-
-#define TYPE_STA 0
-#define TYPE_AP 1
-
-#define PASSIVE_SCAN 1
-#define ACTIVE_SCAN 1
-
-#define PSM_CAM 0
-
-/* Country codes */
-#define USA 1
-#define EUROPE 2
-#define JAPAN 3
-#define KOREA 4
-#define SPAIN 5
-#define FRANCE 6
-#define ISRAEL 7
-#define AUSTRALIA 8
-#define JAPAN_TEST 9
-
-/* Hop pattern lengths */
-#define USA_HOP_MOD 79
-#define EUROPE_HOP_MOD 79
-#define JAPAN_HOP_MOD 23
-#define KOREA_HOP_MOD 23
-#define SPAIN_HOP_MOD 27
-#define FRANCE_HOP_MOD 35
-#define ISRAEL_HOP_MOD 35
-#define AUSTRALIA_HOP_MOD 47
-#define JAPAN_TEST_HOP_MOD 23
-
-#define ESSID_SIZE 32
-/**********************************************************************/
-/* CIS Register Constants */
-#define CIS_OFFSET 0x0f00
-/* Configuration Option Register (0x0F00) */
-#define COR_OFFSET 0x00
-#define COR_SOFT_RESET 0x80
-#define COR_LEVEL_IRQ 0x40
-#define COR_CONFIG_NUM 0x01
-#define COR_DEFAULT (COR_LEVEL_IRQ | COR_CONFIG_NUM)
-
-/* Card Configuration and Status Register (0x0F01) */
-#define CCSR_OFFSET 0x01
-#define CCSR_HOST_INTR_PENDING 0x01
-#define CCSR_POWER_DOWN 0x04
-
-/* HCS Interrupt Register (0x0F05) */
-#define HCS_INTR_OFFSET 0x05
-/* #define HCS_INTR_OFFSET 0x0A */
-#define HCS_INTR_CLEAR 0x00
-
-/* ECF Interrupt Register (0x0F06) */
-#define ECF_INTR_OFFSET 0x06
-/* #define ECF_INTR_OFFSET 0x0C */
-#define ECF_INTR_SET 0x01
-
-/* Authorization Register 0 (0x0F08) */
-#define AUTH_0_ON 0x57
-
-/* Authorization Register 1 (0x0F09) */
-#define AUTH_1_ON 0x82
-
-/* Program Mode Register (0x0F0A) */
-#define PC2PM 0x02
-#define PC2CAL 0x10
-#define PC2MLSE 0x20
-
-/* PC Test Mode Register (0x0F0B) */
-#define PC_TEST_MODE 0x08
-
-/* Frequency Control Word (0x0F10) */
-/* Range 0x02 - 0xA6 */
-
-/* Test Mode Control 1-4 (0x0F14 - 0x0F17) */
-
-/**********************************************************************/
-
-/* Shared RAM Area */
-#define SCB_BASE 0x0000
-#define STATUS_BASE 0x0100
-#define HOST_TO_ECF_BASE 0x0200
-#define ECF_TO_HOST_BASE 0x0300
-#define CCS_BASE 0x0400
-#define RCS_BASE 0x0800
-#define INFRA_TIM_BASE 0x0C00
-#define SSID_LIST_BASE 0x0D00
-#define TX_BUF_BASE 0x1000
-#define RX_BUF_BASE 0x8000
-
-#define NUMBER_OF_CCS 64
-#define NUMBER_OF_RCS 64
-/*#define NUMBER_OF_TX_CCS 14 */
-#define NUMBER_OF_TX_CCS 14
-
-#define TX_BUF_SIZE (2048 - sizeof(struct tx_msg))
-#define RX_BUFF_END 0x3FFF
-/* Values for buffer_status */
-#define CCS_BUFFER_FREE 0
-#define CCS_BUFFER_BUSY 1
-#define CCS_COMMAND_COMPLETE 2
-#define CCS_COMMAND_FAILED 3
-
-/* Values for cmd */
-#define CCS_DOWNLOAD_STARTUP_PARAMS 1
-#define CCS_UPDATE_PARAMS 2
-#define CCS_REPORT_PARAMS 3
-#define CCS_UPDATE_MULTICAST_LIST 4
-#define CCS_UPDATE_POWER_SAVINGS_MODE 5
-#define CCS_START_NETWORK 6
-#define CCS_JOIN_NETWORK 7
-#define CCS_START_ASSOCIATION 8
-#define CCS_TX_REQUEST 9
-#define CCS_TEST_MEMORY 0xa
-#define CCS_SHUTDOWN 0xb
-#define CCS_DUMP_MEMORY 0xc
-#define CCS_START_TIMER 0xe
-#define CCS_LAST_CMD CCS_START_TIMER
-
-/* Values for link field */
-#define CCS_END_LIST 0xff
-
-/* values for buffer_status field */
-#define RCS_BUFFER_FREE 0
-#define RCS_BUFFER_BUSY 1
-#define RCS_COMPLETE 2
-#define RCS_FAILED 3
-#define RCS_BUFFER_RELEASE 0xFF
-
-/* values for interrupt_id field */
-#define PROCESS_RX_PACKET 0x80 /* */
-#define REJOIN_NET_COMPLETE 0x81 /* RCS ID: Rejoin Net Complete */
-#define ROAMING_INITIATED 0x82 /* RCS ID: Roaming Initiated */
-#define JAPAN_CALL_SIGN_RXD 0x83 /* RCS ID: New Japan Call Sign */
-
-/*****************************************************************************/
-/* Memory types for dump memory command */
-#define C_MEM_PROG 0
-#define C_MEM_XDATA 1
-#define C_MEM_SFR 2
-#define C_MEM_IDATA 3
-
-/*** Return values for hw_xmit **********/
-#define XMIT_OK (0)
-#define XMIT_MSG_BAD (-1)
-#define XMIT_NO_CCS (-2)
-#define XMIT_NO_INTR (-3)
-#define XMIT_NEED_AUTH (-4)
-
-/*** Values for card status */
-#define CARD_INSERTED (0)
-
-#define CARD_AWAITING_PARAM (1)
-#define CARD_INIT_ERROR (11)
-
-#define CARD_DL_PARAM (2)
-#define CARD_DL_PARAM_ERROR (12)
-
-#define CARD_DOING_ACQ (3)
-
-#define CARD_ACQ_COMPLETE (4)
-#define CARD_ACQ_FAILED (14)
-
-#define CARD_AUTH_COMPLETE (5)
-#define CARD_AUTH_REFUSED (15)
-
-#define CARD_ASSOC_COMPLETE (6)
-#define CARD_ASSOC_FAILED (16)
-
-/*** Values for authentication_state ***********************************/
-#define UNAUTHENTICATED (0)
-#define AWAITING_RESPONSE (1)
-#define AUTHENTICATED (2)
-#define NEED_TO_AUTH (3)
-
-/*** Values for authentication type ************************************/
-#define OPEN_AUTH_REQUEST (1)
-#define OPEN_AUTH_RESPONSE (2)
-#define BROADCAST_DEAUTH (0xc0)
-/*** Values for timer functions ****************************************/
-#define TODO_NOTHING (0)
-#define TODO_VERIFY_DL_START (-1)
-#define TODO_START_NET (-2)
-#define TODO_JOIN_NET (-3)
-#define TODO_AUTHENTICATE_TIMEOUT (-4)
-#define TODO_SEND_CCS (-5)
-/***********************************************************************/
-/* Parameter passing structure for update/report parameter CCS's */
-struct object_id {
- void *object_addr;
- unsigned char object_length;
-};
-
-#define OBJID_network_type 0
-#define OBJID_acting_as_ap_status 1
-#define OBJID_current_ess_id 2
-#define OBJID_scanning_mode 3
-#define OBJID_power_mgt_state 4
-#define OBJID_mac_address 5
-#define OBJID_frag_threshold 6
-#define OBJID_hop_time 7
-#define OBJID_beacon_period 8
-#define OBJID_dtim_period 9
-#define OBJID_retry_max 10
-#define OBJID_ack_timeout 11
-#define OBJID_sifs 12
-#define OBJID_difs 13
-#define OBJID_pifs 14
-#define OBJID_rts_threshold 15
-#define OBJID_scan_dwell_time 16
-#define OBJID_max_scan_dwell_time 17
-#define OBJID_assoc_resp_timeout 18
-#define OBJID_adhoc_scan_cycle_max 19
-#define OBJID_infra_scan_cycle_max 20
-#define OBJID_infra_super_cycle_max 21
-#define OBJID_promiscuous_mode 22
-#define OBJID_unique_word 23
-#define OBJID_slot_time 24
-#define OBJID_roaming_low_snr 25
-#define OBJID_low_snr_count_thresh 26
-#define OBJID_infra_missed_bcn 27
-#define OBJID_adhoc_missed_bcn 28
-#define OBJID_curr_country_code 29
-#define OBJID_hop_pattern 30
-#define OBJID_reserved 31
-#define OBJID_cw_max_msb 32
-#define OBJID_cw_min_msb 33
-#define OBJID_noise_filter_gain 34
-#define OBJID_noise_limit_offset 35
-#define OBJID_det_rssi_thresh_offset 36
-#define OBJID_med_busy_thresh_offset 37
-#define OBJID_det_sync_thresh 38
-#define OBJID_test_mode 39
-#define OBJID_test_min_chan_num 40
-#define OBJID_test_max_chan_num 41
-#define OBJID_allow_bcast_ID_prbrsp 42
-#define OBJID_privacy_must_start 43
-#define OBJID_privacy_can_join 44
-#define OBJID_basic_rate_set 45
-
-/**** Configuration/Status/Control Area ***************************/
-/* System Control Block (SCB) Area
- * Located at Shared RAM offset 0
- */
-struct scb {
- UCHAR ccs_index;
- UCHAR rcs_index;
-};
-
-/****** Status area at Shared RAM offset 0x0100 ******************************/
-struct status {
- UCHAR mrx_overflow_for_host; /* 0=ECF may write, 1=host may write*/
- UCHAR mrx_checksum_error_for_host; /* 0=ECF may write, 1=host may write*/
- UCHAR rx_hec_error_for_host; /* 0=ECF may write, 1=host may write*/
- UCHAR reserved1;
- short mrx_overflow; /* ECF increments on rx overflow */
- short mrx_checksum_error; /* ECF increments on rx CRC error */
- short rx_hec_error; /* ECF incs on mac header CRC error */
- UCHAR rxnoise; /* Average RSL measurement */
-};
-
-/****** Host-to-ECF Data Area at Shared RAM offset 0x200 *********************/
-struct host_to_ecf_area {
-
-};
-
-/****** ECF-to-Host Data Area at Shared RAM offset 0x0300 ********************/
-struct startup_res_518 {
- UCHAR startup_word;
- UCHAR station_addr[ADDRLEN];
- UCHAR calc_prog_chksum;
- UCHAR calc_cis_chksum;
- UCHAR ecf_spare[7];
- UCHAR japan_call_sign[12];
-};
-
-struct startup_res_6 {
- UCHAR startup_word;
- UCHAR station_addr[ADDRLEN];
- UCHAR reserved;
- UCHAR supp_rates[8];
- UCHAR japan_call_sign[12];
- UCHAR calc_prog_chksum;
- UCHAR calc_cis_chksum;
- UCHAR firmware_version[3];
- UCHAR asic_version;
- UCHAR tib_length;
-};
-
-struct start_join_net_params {
- UCHAR net_type;
- UCHAR ssid[ESSID_SIZE];
- UCHAR reserved;
- UCHAR privacy_can_join;
-};
-
-/****** Command Control Structure area at Shared ram offset 0x0400 ***********/
-/* Structures for command specific parameters (ccs.var) */
-struct update_param_cmd {
- UCHAR object_id;
- UCHAR number_objects;
- UCHAR failure_cause;
-};
-struct report_param_cmd {
- UCHAR object_id;
- UCHAR number_objects;
- UCHAR failure_cause;
- UCHAR length;
-};
-struct start_network_cmd {
- UCHAR update_param;
- UCHAR bssid[ADDRLEN];
- UCHAR net_initiated;
- UCHAR net_default_tx_rate;
- UCHAR encryption;
-};
-struct join_network_cmd {
- UCHAR update_param;
- UCHAR bssid[ADDRLEN];
- UCHAR net_initiated;
- UCHAR net_default_tx_rate;
- UCHAR encryption;
-};
-struct tx_requested_cmd {
-
- UCHAR tx_data_ptr[2];
- UCHAR tx_data_length[2];
- UCHAR host_reserved[2];
- UCHAR reserved[3];
- UCHAR tx_rate;
- UCHAR pow_sav_mode;
- UCHAR retries;
- UCHAR antenna;
-};
-struct tx_requested_cmd_4 {
-
- UCHAR tx_data_ptr[2];
- UCHAR tx_data_length[2];
- UCHAR dest_addr[ADDRLEN];
- UCHAR pow_sav_mode;
- UCHAR retries;
- UCHAR station_id;
-};
-struct memory_dump_cmd {
- UCHAR memory_type;
- UCHAR memory_ptr[2];
- UCHAR length;
-};
-struct update_association_cmd {
- UCHAR status;
- UCHAR aid[2];
-};
-struct start_timer_cmd {
- UCHAR duration[2];
-};
-
-struct ccs {
- UCHAR buffer_status; /* 0 = buffer free, 1 = buffer busy */
- /* 2 = command complete, 3 = failed */
- UCHAR cmd; /* command to ECF */
- UCHAR link; /* link to next CCS, FF=end of list */
- /* command specific parameters */
- union {
- char reserved[13];
- struct update_param_cmd update_param;
- struct report_param_cmd report_param;
- UCHAR nummulticast;
- UCHAR mode;
- struct start_network_cmd start_network;
- struct join_network_cmd join_network;
- struct tx_requested_cmd tx_request;
- struct memory_dump_cmd memory_dump;
- struct update_association_cmd update_assoc;
- struct start_timer_cmd start_timer;
- } var;
-};
-
-/*****************************************************************************/
-/* Transmit buffer structures */
-struct tib_structure {
- UCHAR ccs_index;
- UCHAR psm;
- UCHAR pass_fail;
- UCHAR retry_count;
- UCHAR max_retries;
- UCHAR frags_remaining;
- UCHAR no_rb;
- UCHAR rts_reqd;
- UCHAR csma_tx_cntrl_2;
- UCHAR sifs_tx_cntrl_2;
- UCHAR tx_dma_addr_1[2];
- UCHAR tx_dma_addr_2[2];
- UCHAR var_dur_2mhz[2];
- UCHAR var_dur_1mhz[2];
- UCHAR max_dur_2mhz[2];
- UCHAR max_dur_1mhz[2];
- UCHAR hdr_len;
- UCHAR max_frag_len[2];
- UCHAR var_len[2];
- UCHAR phy_hdr_4;
- UCHAR mac_hdr_1;
- UCHAR mac_hdr_2;
- UCHAR sid[2];
-};
-
-struct phy_header {
- UCHAR sfd[2];
- UCHAR hdr_3;
- UCHAR hdr_4;
-};
-struct ray_rx_msg {
- struct mac_header mac;
- UCHAR var[];
-};
-
-struct tx_msg {
- struct tib_structure tib;
- struct phy_header phy;
- struct mac_header mac;
- UCHAR var[];
-};
-
-/****** ECF Receive Control Structure (RCS) Area at Shared RAM offset 0x0800 */
-/* Structures for command specific parameters (rcs.var) */
-struct rx_packet_cmd {
- UCHAR rx_data_ptr[2];
- UCHAR rx_data_length[2];
- UCHAR rx_sig_lev;
- UCHAR next_frag_rcs_index;
- UCHAR totalpacketlength[2];
-};
-struct rejoin_net_cmplt_cmd {
- UCHAR reserved;
- UCHAR bssid[ADDRLEN];
-};
-struct japan_call_sign_rxd {
- UCHAR rxd_call_sign[8];
- UCHAR reserved[5];
-};
-
-struct rcs {
- UCHAR buffer_status;
- UCHAR interrupt_id;
- UCHAR link_field;
- /* command specific parameters */
- union {
- UCHAR reserved[13];
- struct rx_packet_cmd rx_packet;
- struct rejoin_net_cmplt_cmd rejoin_net_complete;
- struct japan_call_sign_rxd japan_call_sign;
- } var;
-};
-
-/****** Startup parameter structures for both versions of firmware ***********/
-struct b4_startup_params {
- UCHAR a_network_type; /* C_ADHOC, C_INFRA */
- UCHAR a_acting_as_ap_status; /* C_TYPE_STA, C_TYPE_AP */
- UCHAR a_current_ess_id[ESSID_SIZE]; /* Null terminated unless 32 long */
- UCHAR a_scanning_mode; /* passive 0, active 1 */
- UCHAR a_power_mgt_state; /* CAM 0, */
- UCHAR a_mac_addr[ADDRLEN]; /* */
- UCHAR a_frag_threshold[2]; /* 512 */
- UCHAR a_hop_time[2]; /* 16k * 2**n, n=0-4 in Kus */
- UCHAR a_beacon_period[2]; /* n * a_hop_time in Kus */
- UCHAR a_dtim_period; /* in beacons */
- UCHAR a_retry_max; /* */
- UCHAR a_ack_timeout; /* */
- UCHAR a_sifs; /* */
- UCHAR a_difs; /* */
- UCHAR a_pifs; /* */
- UCHAR a_rts_threshold[2]; /* */
- UCHAR a_scan_dwell_time[2]; /* */
- UCHAR a_max_scan_dwell_time[2]; /* */
- UCHAR a_assoc_resp_timeout_thresh; /* */
- UCHAR a_adhoc_scan_cycle_max; /* */
- UCHAR a_infra_scan_cycle_max; /* */
- UCHAR a_infra_super_scan_cycle_max; /* */
- UCHAR a_promiscuous_mode; /* */
- UCHAR a_unique_word[2]; /* */
- UCHAR a_slot_time; /* */
- UCHAR a_roaming_low_snr_thresh; /* */
- UCHAR a_low_snr_count_thresh; /* */
- UCHAR a_infra_missed_bcn_thresh; /* */
- UCHAR a_adhoc_missed_bcn_thresh; /* */
- UCHAR a_curr_country_code; /* C_USA */
- UCHAR a_hop_pattern; /* */
- UCHAR a_hop_pattern_length; /* */
-/* b4 - b5 differences start here */
- UCHAR a_cw_max; /* */
- UCHAR a_cw_min; /* */
- UCHAR a_noise_filter_gain; /* */
- UCHAR a_noise_limit_offset; /* */
- UCHAR a_det_rssi_thresh_offset; /* */
- UCHAR a_med_busy_thresh_offset; /* */
- UCHAR a_det_sync_thresh; /* */
- UCHAR a_test_mode; /* */
- UCHAR a_test_min_chan_num; /* */
- UCHAR a_test_max_chan_num; /* */
- UCHAR a_rx_tx_delay; /* */
- UCHAR a_current_bss_id[ADDRLEN]; /* */
- UCHAR a_hop_set; /* */
-};
-struct b5_startup_params {
- UCHAR a_network_type; /* C_ADHOC, C_INFRA */
- UCHAR a_acting_as_ap_status; /* C_TYPE_STA, C_TYPE_AP */
- UCHAR a_current_ess_id[ESSID_SIZE]; /* Null terminated unless 32 long */
- UCHAR a_scanning_mode; /* passive 0, active 1 */
- UCHAR a_power_mgt_state; /* CAM 0, */
- UCHAR a_mac_addr[ADDRLEN]; /* */
- UCHAR a_frag_threshold[2]; /* 512 */
- UCHAR a_hop_time[2]; /* 16k * 2**n, n=0-4 in Kus */
- UCHAR a_beacon_period[2]; /* n * a_hop_time in Kus */
- UCHAR a_dtim_period; /* in beacons */
- UCHAR a_retry_max; /* 4 */
- UCHAR a_ack_timeout; /* */
- UCHAR a_sifs; /* */
- UCHAR a_difs; /* */
- UCHAR a_pifs; /* */
- UCHAR a_rts_threshold[2]; /* */
- UCHAR a_scan_dwell_time[2]; /* */
- UCHAR a_max_scan_dwell_time[2]; /* */
- UCHAR a_assoc_resp_timeout_thresh; /* */
- UCHAR a_adhoc_scan_cycle_max; /* */
- UCHAR a_infra_scan_cycle_max; /* */
- UCHAR a_infra_super_scan_cycle_max; /* */
- UCHAR a_promiscuous_mode; /* */
- UCHAR a_unique_word[2]; /* */
- UCHAR a_slot_time; /* */
- UCHAR a_roaming_low_snr_thresh; /* */
- UCHAR a_low_snr_count_thresh; /* */
- UCHAR a_infra_missed_bcn_thresh; /* */
- UCHAR a_adhoc_missed_bcn_thresh; /* */
- UCHAR a_curr_country_code; /* C_USA */
- UCHAR a_hop_pattern; /* */
- UCHAR a_hop_pattern_length; /* */
-/* b4 - b5 differences start here */
- UCHAR a_cw_max[2]; /* */
- UCHAR a_cw_min[2]; /* */
- UCHAR a_noise_filter_gain; /* */
- UCHAR a_noise_limit_offset; /* */
- UCHAR a_det_rssi_thresh_offset; /* */
- UCHAR a_med_busy_thresh_offset; /* */
- UCHAR a_det_sync_thresh; /* */
- UCHAR a_test_mode; /* */
- UCHAR a_test_min_chan_num; /* */
- UCHAR a_test_max_chan_num; /* */
- UCHAR a_allow_bcast_SSID_probe_rsp;
- UCHAR a_privacy_must_start;
- UCHAR a_privacy_can_join;
- UCHAR a_basic_rate_set[8];
-};
-
-/*****************************************************************************/
-#define RAY_IOCG_PARMS (SIOCDEVPRIVATE)
-#define RAY_IOCS_PARMS (SIOCDEVPRIVATE + 1)
-#define RAY_DO_CMD (SIOCDEVPRIVATE + 2)
-
-/****** ethernet <-> 802.11 translation **************************************/
-typedef struct snaphdr_t
-{
- UCHAR dsap;
- UCHAR ssap;
- UCHAR ctrl;
- UCHAR org[3];
- UCHAR ethertype[2];
-} snaphdr_t;
-
-#define BRIDGE_ENCAP 0xf80000
-#define RFC1042_ENCAP 0
-#define SNAP_ID 0x0003aaaa
-#define RAY_IPX_TYPE 0x8137
-#define APPLEARP_TYPE 0x80f3
-/*****************************************************************************/
-#endif /* _RAYCTL_H_ */
--
2.39.2