[PATCH v2 2/3] dt-bindings: adis16475: Add 'spi-cs-inactive-delay-ns' property

[Ramona Gradinariu]

The devices supported by adis16475 driver require a stall period
between SPI transactions (during which the chip select is
inactive), with a minimum value equal to 16 microseconds, thus
adding 'spi-cs-inactive-delay-ns' property, which should indicate
the stall time between consecutive SPI transactions.

Signed-off-by: Ramona Gradinariu <ramona.gradinariu@xxxxxxxxxx>
---
changes in v2:
 - added default value
 - updated description
 - updated commit message
 .../devicetree/bindings/iio/imu/adi,adis16475.yaml          | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
index c73533c54588..135ccdd5c392 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16475.yaml
@@ -47,6 +47,12 @@ properties:
   spi-max-frequency:
     maximum: 2000000

+  spi-cs-inactive-delay-ns:
+    minimum: 16000
+    default: 16000
+    description:
+      Indicates the stall time between consecutive SPI transactions.
+
   interrupts:
     maxItems: 1

--
2.34.1