[PATCH v2 1/1] arm64: dts: cn913x: add device trees for COM Express boards
From: Elad Nachman
Date: Wed Oct 25 2023 - 03:32:45 EST
From: Elad Nachman <enachman@xxxxxxxxxxx>
Add support for CN9130 and CN9131 COM Express Type 7 CPU
module boards (SOM boards) by Marvell.
Define these COM Express CPU modules / SOMs as dtsi, and
provide a dts file for a carrier board (Marvell AC5X RD
COM Express type 7 carrier board).
This Carrier board only utilizes the PCIe link, hence no
special device / driver support is provided by this dts file.
These boards differ from the existing CN913x DB boards by the type
of ethernet connection (RGMII), the type of voltage regulators
(not i2c expander based) and the USB phy (not UTMI based).
CN9131 COM Express board is basically CN9130 COM Express board
with an additional CP115 I/O co-processor, which in this case
provides an additional USB host controller on the board.
Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/Makefile | 1 +
.../boot/dts/marvell/ac5x_rd_carrier.dts | 23 ++++
.../dts/marvell/cn9130-db-comexpress.dtsi | 101 ++++++++++++++++
.../dts/marvell/cn9131-db-comexpress.dtsi | 113 ++++++++++++++++++
4 files changed, 238 insertions(+)
create mode 100644 arch/arm64/boot/dts/marvell/ac5x_rd_carrier.dts
create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 79ac09b58a89..b0a2347200ef 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -26,4 +26,5 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
+dtb-$(CONFIG_ARCH_MVEBU) += ac5x_rd_carrier.dtb
dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
diff --git a/arch/arm64/boot/dts/marvell/ac5x_rd_carrier.dts b/arch/arm64/boot/dts/marvell/ac5x_rd_carrier.dts
new file mode 100644
index 000000000000..4b2cf417332f
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/ac5x_rd_carrier.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the AC5X RD Type 7 Com Express carrier board,
+ * Utilizing the CN913x COM Express SOM board.
+ * This specific board only maintains a PCIe link with the CPU SOM
+ * module, which does not require any special DTS definitions.
+ */
+
+#include "cn9131-db-comexpress.dtsi"
+
+/ {
+ model = "Marvell Armada AC5X RD COM EXPRESS type 7 carrier board";
+ compatible = "marvell,cn9131", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x2 0x00000000>;
+ };
+
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
new file mode 100644
index 000000000000..10fe527bb7a8
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9130-DB Com Express SOM board.
+ */
+
+#include "cn9130-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9130-DB COM EXPRESS type 7 SOM board";
+ compatible = "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x2 0x00000000>;
+ };
+
+};
+
+&ap0_reg_sd_vccq {
+ regulator-max-microvolt = <1800000>;
+ states = <1800000 0x1 1800000 0x0>;
+ /delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+ status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+ status = "disabled";
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_eth0 {
+ status = "disabled";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+ status = "disabled";
+};
+
+&cp0_mdio {
+ status = "okay";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ phy0: ethernet-phy@0 {
+ status = "okay";
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "ge";
+ };
+ };
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_spi1 {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
new file mode 100644
index 000000000000..855cd163234c
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 Marvell International Ltd.
+ *
+ * Device tree for the CN9131-DB Com Express SOM board.
+ */
+
+#include "cn9131-db.dtsi"
+
+/ {
+ model = "Marvell Armada CN9131-DB COM EXPRESS type 7 SOM board";
+ compatible = "marvell,cn9131", "marvell,cn9130",
+ "marvell,armada-ap807-quad", "marvell,armada-ap807";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x2 0x00000000>;
+ };
+
+};
+
+&ap0_reg_sd_vccq {
+ regulator-max-microvolt = <1800000>;
+ states = <1800000 0x1 1800000 0x0>;
+ /delete-property/ gpios;
+};
+
+&cp0_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_usb3_vbus1 {
+ /delete-property/ gpio;
+};
+
+&cp1_reg_usb3_vbus0 {
+ /delete-property/ gpio;
+};
+
+&cp0_reg_sd_vcc {
+ status = "disabled";
+};
+
+&cp0_reg_sd_vccq {
+ status = "disabled";
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_eth0 {
+ status = "disabled";
+};
+
+&cp0_eth1 {
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+};
+
+&cp0_eth2 {
+ status = "disabled";
+};
+
+&cp0_mdio {
+ status = "okay";
+ pinctrl-0 = <&cp0_ge_mdio_pins>;
+ phy0: ethernet-phy@0 {
+ status = "okay";
+ };
+};
+
+&cp0_syscon0 {
+ cp0_pinctrl: pinctrl {
+ compatible = "marvell,cp115-standalone-pinctrl";
+
+ cp0_ge_mdio_pins: ge-mdio-pins {
+ marvell,pins = "mpp40", "mpp41";
+ marvell,function = "ge";
+ };
+ };
+};
+
+&cp0_sdhci0 {
+ status = "disabled";
+};
+
+&cp0_spi1 {
+ status = "okay";
+};
+
+&cp0_usb3_0 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy0>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp0_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp0_usb3_0_phy1>;
+ phy-names = "usb";
+ /delete-property/ phys;
+};
+
+&cp1_usb3_1 {
+ status = "okay";
+ usb-phy = <&cp1_usb3_0_phy0>;
+ /* Generic PHY, providing serdes lanes */
+ phys = <&cp1_comphy3 1>;
+ phy-names = "usb";
+};
--
2.25.1