Re: [PATCH v8 0/3] media: rockchip: Add a driver for Rockchip's camera interface

From: Michael Riesch
Date: Wed Oct 25 2023 - 05:17:26 EST

Next message: Maxime Ripard: "Re: [PATCH v2] kunit: Warn if tests are slow"
Previous message: Krzysztof Kozlowski: "Re: [PATCH RFC 3/8] arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable"
In reply to: Paul Kocialkowski: "Re: [PATCH v8 0/3] media: rockchip: Add a driver for Rockchip's camera interface"
Next in thread: Paul Kocialkowski: "Re: [PATCH v8 0/3] media: rockchip: Add a driver for Rockchip's camera interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Paul,

On 10/25/23 10:43, Paul Kocialkowski wrote:
> [...]
>>> Here is the detail of my research on the concerned chips. The + at the beginning
>>> of the line indicate support in Rockchip's 4.4 tree:
>>>
>>> - RK3566/RK3568 (2020): CIF pins + VICAP terminology
>>> + RK1808 (2019): CIF pins + VIP registers + VIP_MIPI registers
>>> + PX30 (2017): VIP pins + VIP registers
>>> + RK3328 (2017): CIF pins + VIP terminology
>>> - RK3326 (2017): CIF pins + VIP terminology
>>> - RK3399 (2016): CIF pins
>>> - RK3368 (2015): CIF pins
>>> - PX2 (2014-11): CIF pins + CIF registers
>>> + RK3126/RK3128 (2014-10): CIF pins + registers
>>> + RK3288 (2014-05): CIF pins + VIP terminology
>>> - RK3026 (2013): CIF pins + CIF registers
>>> - RK3168/RK3188/PX3 (2012): CIF pins + CIF registers
>>> - RK3066 (2012): CIF pins + CIF registers
>>>
>>> Note that there are a few variations over time (added/removed registers), but
>>> the offsets of crucial registers are always the same, so we can safely
>>> assume this is the same unit in different generations.
>>>
>>> Since the RK3066 is the first model starting the RK30 lineup I think we can
>>> safely use that for the "base" compatible to be used for e.g. the bindings
>>> document, instead of px30 which is just one of the many SoCs that use this unit.
>>
>> Once the name of the driver is defined and adjusted in v9, I can try to
>> give the series a shot on my RK3568 board. First attempts to do so
>> basing on Maxime's v5 showed that with a few modifications the DVP
>> feature works fine. In a subsequent step, we could discuss the inclusion
>> of the MIPI CSI-2 things in order to keep the driver sufficiently general.
>
> Nice! I guess there will be a need to introduce a variant structure associated
> to each compatible to express the differences betweens these different
> generations.

Indeed. If Mehdi and you suggest something, I'd be happy to review.
Otherwise, I'll try to come up with something reasonable. IMHO it would
make sense (as a first step) to have the clocks and the resets in this
structure, as well as a sub-structure that describes the DVP. The latter
consists of registers mainly, but maybe supported input/output formats
and other things should go in there as well. Also, downstream code has a
significant number of
if (some condition including chip_id) A; else B;
things that we should probably get rid of with this variant structure.

As next step, a sub-structure for MIPI CSI-2 could be defined. RK356X
will have one of those, RK3588 will feature even six of them. So we
should add a const array to the variant structure.

> Note that we will also probably need to convert the driver over to a MC-centric
> approach, but this is of course outside of the scope of this series.

That would absolutely make sense. What is missing, though? (I was
wondering that the driver calls media_device_(un)register but no
/dev/mediaX device pops up.)

Best regards,
Michael

>
> Cheers,
>
> Paul
>
>> @Mehdi: If you could Cc: me when you send out v9 it'd be much appreciated.
>>
>> Best regards,
>> Michael
>>
>> [0]
>> https://github.com/rockchip-linux/kernel/blob/develop-5.10/drivers/media/platform/rockchip/cif/hw.c#L968
>>
>>>
>>>> This version of the driver supports ONLY the parallel interface BT656
>>>> and was tested/implemented using an SDTV video decoder
>>>>
>>>> media_tree, base-commit: 2c1bae27df787c9535e48cc27bbd11c3c3e0a235
>>>>
>>>> V7 => V8:
>>>> vip/capture.c:
>>>> - fixed a warning: unused variable reported by the kernel test robot
>>>>
>>>> V6 => V7:
>>>> vip/capture.c vip/dev.c vip/dev.h
>>>> - renamed all struct rk_vip_dev dev => struct rk_vip_dev vip_dev
>>>> - added some error when rk_vip_get_buffer() returns NULL
>>>> - removed a WARN_ON
>>>> - made the irq NOT shared
>>>> - dropped of_match_ptr
>>>> - added the rk_vip_get_resource() function
>>>>
>>>> rockchip,px30-vip.yaml:
>>>> - changed filename to match the compatible
>>>> - dropped the mention of the other rockchip SoC in the dt-binding
>>>> description and added a more detailed description of VIP
>>>> - removed unused labels in the example
>>>>
>>>>
>>>> V5 [1] => V6:
>>>> vip/capture.c vip/dev.c vip/dev.h
>>>> - added a video g_input_status subdev call, V4L2_IN_CAP_STD and the
>>>> supported stds in rk_vip_enum_input callback
>>>> - added rk_vip_g_std, rk_vip_s_std and rk_vip_querystd callbacks
>>>> - added the supported video_device->tvnorms
>>>> - s_std will now update the format as this depends on the standard
>>>> NTSC/PAL (as suggested by Hans in [1])
>>>> - removed STD_ATSC
>>>> - moved the colorimetry information to come from the subdev
>>>> - removed the core s_power subdev calls
>>>> - dropped cropping in rk_vip_stream struct
>>>>
>>>> rockchip-vip.yaml:
>>>> - fixed a mistake in the name of third clock plckin -> plck
>>>> - changed the reg maxItems 2 -> 1
>>>>
>>>> [1] https://lore.kernel.org/linux-media/20201229161724.511102-1-maxime.chevallier@xxxxxxxxxxx/
>>>>
>>>> I used v4l-utils with HEAD: commit 1ee258e5bb91a12df378e19eb255c5219d6bc36b
>>>>
>>>> # v4l2-compliance
>>>> v4l2-compliance 1.25.0, 64 bits, 64-bit time_t
>>>>
>>>> Compliance test for rk_vip device /dev/video0:
>>>>
>>>> Driver Info:
>>>> Driver name : rk_vip
>>>> Card type : rk_vip
>>>> Bus info : platform:ff490000.vip
>>>> Driver version : 6.6.0
>>>> Capabilities : 0x84201000
>>>> Video Capture Multiplanar
>>>> Streaming
>>>> Extended Pix Format
>>>> Device Capabilities
>>>> Device Caps : 0x04201000
>>>> Video Capture Multiplanar
>>>> Streaming
>>>> Extended Pix Format
>>>> Media Driver Info:
>>>> Driver name : rk_vip
>>>> Model : rk_vip
>>>> Serial :
>>>> Bus info : platform:ff490000.vip
>>>> Media version : 6.6.0
>>>> Hardware revision: 0x00000000 (0)
>>>> Driver version : 6.6.0
>>>> Interface Info:
>>>> ID : 0x03000002
>>>> Type : V4L Video
>>>> Entity Info:
>>>> ID : 0x00000001 (1)
>>>> Name : video_rkvip
>>>> Function : V4L2 I/O
>>>> Pad 0x01000004 : 0: Sink
>>>> Link 0x02000009: from remote pad 0x1000006 of entity 'tw9900 2-0044' (Digital Video Decoder): Data, Enabled
>>>>
>>>> Required ioctls:
>>>> test MC information (see 'Media Driver Info' above): OK
>>>> test VIDIOC_QUERYCAP: OK
>>>> test invalid ioctls: OK
>>>>
>>>> Allow for multiple opens:
>>>> test second /dev/video0 open: OK
>>>> test VIDIOC_QUERYCAP: OK
>>>> test VIDIOC_G/S_PRIORITY: OK
>>>> test for unlimited opens: OK
>>>>
>>>> Debug ioctls:
>>>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>>>> test VIDIOC_LOG_STATUS: OK (Not Supported)
>>>>
>>>> Input ioctls:
>>>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>>>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>>>> test VIDIOC_G/S/ENUMINPUT: OK
>>>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>>>> Inputs: 1 Audio Inputs: 0 Tuners: 0
>>>>
>>>> Output ioctls:
>>>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>>>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>>>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>>>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>>>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>>>> Outputs: 0 Audio Outputs: 0 Modulators: 0
>>>>
>>>> Input/Output configuration ioctls:
>>>> test VIDIOC_ENUM/G/S/QUERY_STD: OK
>>>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>>>> test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>>>> test VIDIOC_G/S_EDID: OK (Not Supported)
>>>>
>>>> Control ioctls (Input 0):
>>>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK (Not Supported)
>>>> test VIDIOC_QUERYCTRL: OK (Not Supported)
>>>> test VIDIOC_G/S_CTRL: OK (Not Supported)
>>>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK (Not Supported)
>>>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported)
>>>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>>>> Standard Controls: 0 Private Controls: 0
>>>>
>>>> Format ioctls (Input 0):
>>>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>>>> test VIDIOC_G/S_PARM: OK (Not Supported)
>>>> test VIDIOC_G_FBUF: OK (Not Supported)
>>>> test VIDIOC_G_FMT: OK
>>>> test VIDIOC_TRY_FMT: OK
>>>> test VIDIOC_S_FMT: OK
>>>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>>>> test Cropping: OK (Not Supported)
>>>> test Composing: OK (Not Supported)
>>>> test Scaling: OK (Not Supported)
>>>>
>>>> Codec ioctls (Input 0):
>>>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>>>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>>>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>>>
>>>> Buffer ioctls (Input 0):
>>>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>>>> test VIDIOC_EXPBUF: OK
>>>> test Requests: OK (Not Supported)
>>>>
>>>> Total for rk_vip device /dev/video0: 46, Succeeded: 46, Failed: 0, Warnings: 0
>>>>
>>>> Mehdi Djait (3):
>>>> media: dt-bindings: media: add bindings for Rockchip VIP
>>>> media: rockchip: Add a driver for Rockhip's camera interface
>>>> arm64: dts: rockchip: Add the camera interface
>>>>
>>>> .../bindings/media/rockchip,px30-vip.yaml | 93 ++
>>>> arch/arm64/boot/dts/rockchip/px30.dtsi | 12 +
>>>> drivers/media/platform/rockchip/Kconfig | 1 +
>>>> drivers/media/platform/rockchip/Makefile | 1 +
>>>> drivers/media/platform/rockchip/vip/Kconfig | 14 +
>>>> drivers/media/platform/rockchip/vip/Makefile | 3 +
>>>> drivers/media/platform/rockchip/vip/capture.c | 1210 +++++++++++++++++
>>>> drivers/media/platform/rockchip/vip/dev.c | 346 +++++
>>>> drivers/media/platform/rockchip/vip/dev.h | 163 +++
>>>> drivers/media/platform/rockchip/vip/regs.h | 260 ++++
>>>> 10 files changed, 2103 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/media/rockchip,px30-vip.yaml
>>>> create mode 100644 drivers/media/platform/rockchip/vip/Kconfig
>>>> create mode 100644 drivers/media/platform/rockchip/vip/Makefile
>>>> create mode 100644 drivers/media/platform/rockchip/vip/capture.c
>>>> create mode 100644 drivers/media/platform/rockchip/vip/dev.c
>>>> create mode 100644 drivers/media/platform/rockchip/vip/dev.h
>>>> create mode 100644 drivers/media/platform/rockchip/vip/regs.h
>>>>
>>>> --
>>>> 2.41.0
>>>>
>>>
>

Next message: Maxime Ripard: "Re: [PATCH v2] kunit: Warn if tests are slow"
Previous message: Krzysztof Kozlowski: "Re: [PATCH RFC 3/8] arm64: dts: qcom: pm8550ve: make PMK8550VE SID configurable"
In reply to: Paul Kocialkowski: "Re: [PATCH v8 0/3] media: rockchip: Add a driver for Rockchip's camera interface"
Next in thread: Paul Kocialkowski: "Re: [PATCH v8 0/3] media: rockchip: Add a driver for Rockchip's camera interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]