[PATCH] dt-bindings: hwmon: lm87: convert to YAML

[Li peiyu]

Convert the lm87 hwmon sensor bindings to DT schema

Signed-off-by: Li peiyu <579lpy@xxxxxxxxx>
---
 .../devicetree/bindings/hwmon/lm87.txt        | 30 ----------
 .../devicetree/bindings/hwmon/lm87.yaml       | 59 +++++++++++++++++++
 2 files changed, 59 insertions(+), 30 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/hwmon/lm87.txt
 create mode 100644 Documentation/devicetree/bindings/hwmon/lm87.yaml

diff --git a/Documentation/devicetree/bindings/hwmon/lm87.txt b/Documentation/devicetree/bindings/hwmon/lm87.txt
deleted file mode 100644
index 758ff398b67b..000000000000
--- a/Documentation/devicetree/bindings/hwmon/lm87.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-*LM87 hwmon sensor.
-
-Required properties:
-- compatible: Should be
-	"ti,lm87"
-
-- reg: I2C address
-
-optional properties:
-- has-temp3: This configures pins 18 and 19 to be used as a second
-             remote temperature sensing channel. By default the pins
-             are configured as voltage input pins in0 and in5.
-
-- has-in6: When set, pin 5 is configured to be used as voltage input
-           in6. Otherwise the pin is set as FAN1 input.
-
-- has-in7: When set, pin 6 is configured to be used as voltage input
-           in7. Otherwise the pin is set as FAN2 input.
-
-- vcc-supply: a Phandle for the regulator supplying power, can be
-              configured to measure 5.0V power supply. Default is 3.3V.
-
-Example:
-
-lm87@2e {
-	compatible = "ti,lm87";
-	reg = <0x2e>;
-	has-temp3;
-	vcc-supply = <&reg_5v0>;
-};
diff --git a/Documentation/devicetree/bindings/hwmon/lm87.yaml b/Documentation/devicetree/bindings/hwmon/lm87.yaml
new file mode 100644
index 000000000000..54d6ef6700ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/lm87.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/lm87.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LM87 hwmon sensor
+
+maintainers:
+  - Jean Delvare <jdelvare@xxxxxxxx>
+  - Guenter Roeck <linux@xxxxxxxxxxxx>
+
+properties:
+  compatible:
+    const: ti,lm87
+
+  reg:
+    maxItems: 1
+
+  has-temp3:
+    description: |
+      This configures pins 18 and 19 to be used as a second remote
+      temperature sensing channel. By default the pins are configured
+      as voltage input pins in0 and in5.
+
+  has-in6:
+    description: |
+      When set, pin 5 is configured to be used as voltage input in6.
+      Otherwise the pin is set as FAN1 input.
+
+  has-in7:
+    description: |
+      When set, pin 6 is configured to be used as voltage input in7.
+      Otherwise the pin is set as FAN2 input.
+
+  vcc-supply:
+    description: |
+      a Phandle for the regulator supplying power, can be configured to
+      measure 5.0V power supply. Default is 3.3V.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lm87@2e {
+        compatible = "ti,lm87";
+        reg = <0x2e>;
+        has-temp3;
+	vcc-supply = <&reg_5v0>;
+      };
+    };
-- 
2.34.1