[PATCH 10/10] staging: rtl8192e: Remove unused constants starting with MAX_RX_QUEUE
From: Philipp Hortmann
Date: Thu Oct 26 2023 - 01:45:03 EST
Remove unused constants.
Signed-off-by: Philipp Hortmann <philipp.g.hortmann@xxxxxxxxx>
---
.../staging/rtl8192e/rtl8192e/r8190P_def.h | 2 -
.../staging/rtl8192e/rtl8192e/r8192E_phyreg.h | 62 +------------------
drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 2 -
drivers/staging/rtl8192e/rtl819x_Qos.h | 1 -
drivers/staging/rtl8192e/rtl819x_TS.h | 1 -
drivers/staging/rtl8192e/rtllib.h | 1 -
6 files changed, 1 insertion(+), 68 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8190P_def.h b/drivers/staging/rtl8192e/rtl8192e/r8190P_def.h
index c229fd244a48..8c85f1c866d3 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8190P_def.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r8190P_def.h
@@ -11,8 +11,6 @@
#define MAX_SILENT_RESET_RX_SLOT_NUM 10
-#define RX_MPDU_QUEUE 0
-
enum rtl819x_loopback {
RTL819X_NO_LOOPBACK = 0,
RTL819X_MAC_LOOPBACK = 1,
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h b/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h
index 24fb0ca539ea..c48c56869c19 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_phyreg.h
@@ -248,75 +248,15 @@
#define bPAEnd 0xf
#define bTREnd 0x0f000000
#define bRFEnd 0x000f0000
-/* T2R */
-#define bCCAMask 0x000000f0
-#define bR2RCCAMask 0x00000f00
-#define bHSSI_R2TDelay 0xf8000000
-#define bHSSI_T2RDelay 0xf80000
/* Channel gain at continue TX. */
-#define bContTxHSSI 0x400
-#define bIGFromCCK 0x200
-#define bAGCAddress 0x3f
-#define bRxHPTx 0x7000
-#define bRxHPT2R 0x38000
-#define bRxHPCCKIni 0xc0000
-#define bAGCTxCode 0xc00000
-#define bAGCRxCode 0x300000
#define b3WireDataLength 0x800
#define b3WireAddressLength 0x400
-#define b3WireRFPowerDown 0x1
-/*#define bHWSISelect 0x8 */
-#define b2GPAPEPolarity 0x80000000
-#define bRFSW_TxDefaultAnt 0x3
-#define bRFSW_TxOptionAnt 0x30
-#define bRFSW_RxDefaultAnt 0x300
-#define bRFSW_RxOptionAnt 0x3000
-#define bRFSI_3WireData 0x1
-#define bRFSI_3WireClock 0x2
-#define bRFSI_3WireLoad 0x4
-#define bRFSI_3WireRW 0x8
/* 3-wire total control */
-#define bRFSI_3Wire 0xf
#define bRFSI_RFENV 0x10
-#define bRFSI_TRSW 0x20
-#define bRFSI_TRSWB 0x40
-#define bRFSI_ANTSW 0x100
-#define bRFSI_ANTSWB 0x200
-#define bRFSI_PAPE 0x400
-#define bBandSelect 0x1
-#define bHTSIG2_GI 0x80
-#define bHTSIG2_Smoothing 0x01
-#define bHTSIG2_Sounding 0x02
-#define bHTSIG2_Aggreaton 0x08
-#define bHTSIG2_STBC 0x30
-#define bHTSIG2_AdvCoding 0x40
-#define bHTSIG2_NumOfHTLTF 0x300
-#define bHTSIG2_CRC8 0x3fc
-#define bHTSIG1_MCS 0x7f
-#define bHTSIG1_BandWidth 0x80
-#define bHTSIG1_HTLength 0xffff
-#define bLSIG_Rate 0xf
-#define bLSIG_Reserved 0x10
-#define bLSIG_Length 0x1fffe
-#define bLSIG_Parity 0x20
-#define bCCKRxPhase 0x4
#define bLSSIReadAddress 0x3f000000 /* LSSI "read" address */
#define bLSSIReadEdge 0x80000000 /* LSSI "read" edge signal */
#define bLSSIReadBackData 0xfff
-#define bLSSIReadOKFlag 0x1000
-#define bCCKSampleRate 0x8 /* 0: 44 MHz, 1: 88MHz */
-
-#define bRegulator0Standby 0x1
-#define bRegulatorPLLStandby 0x2
-#define bRegulator1Standby 0x4
-#define bPLLPowerUp 0x8
-#define bDPLLPowerUp 0x10
-#define bDA10PowerUp 0x20
-#define bAD7PowerUp 0x200
-#define bDA6PowerUp 0x2000
-#define bXtalPowerUp 0x4000
-#define b40MDClkPowerUP 0x8000
-#define bDA6DebugMode 0x20000
+
#define bDA6Swing 0x380000
#define bADClkPhase 0x4000000
#define b80MClkDelay 0x18000000
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
index a6c47388d72c..a4afbf3e934d 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h
@@ -91,8 +91,6 @@
#define MAX_TX_QUEUE 9
-#define MAX_RX_QUEUE 1
-
#define MAX_RX_COUNT 64
#define MAX_TX_QUEUE_COUNT 9
diff --git a/drivers/staging/rtl8192e/rtl819x_Qos.h b/drivers/staging/rtl8192e/rtl819x_Qos.h
index f547de4c1da3..1c00092ea3a5 100644
--- a/drivers/staging/rtl8192e/rtl819x_Qos.h
+++ b/drivers/staging/rtl8192e/rtl819x_Qos.h
@@ -21,7 +21,6 @@ struct octet_string {
#define AC1_BK 1
#define AC2_VI 2
#define AC3_VO 3
-#define AC_MAX 4
enum direction_value {
DIR_UP = 0,
diff --git a/drivers/staging/rtl8192e/rtl819x_TS.h b/drivers/staging/rtl8192e/rtl819x_TS.h
index ab737428d4a7..fff36315f174 100644
--- a/drivers/staging/rtl8192e/rtl819x_TS.h
+++ b/drivers/staging/rtl8192e/rtl819x_TS.h
@@ -10,7 +10,6 @@
#define TS_ADDBA_DELAY 60
#define TOTAL_TS_NUM 16
-#define TCLAS_NUM 4
enum tr_select {
TX_DIR = 0,
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index dc3488d9693f..d2cf3cfaaaba 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -911,7 +911,6 @@ enum {WMM_all_frame, WMM_two_frame, WMM_four_frame, WMM_six_frame};
((up) < 6) ? WME_AC_VI : \
WME_AC_VO)
-#define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
#define ETHERNET_HEADER_SIZE 14 /* length of two Ethernet address
* plus ether type
*/
--
2.42.0