Re: [PATCH v2 2/3] arm64: dts: qcom: pm8916: Add BMS and charger

[Nikita Travkin]

Konrad Dybcio писал(а) 27.10.2023 01:03:
> On 10/26/23 21:17, Stephan Gerhold wrote:
>> On Thu, Oct 26, 2023 at 08:54:00PM +0200, Konrad Dybcio wrote:
>>> On 10/24/23 11:29, Nikita Travkin wrote:
>>>> Konrad Dybcio писал(а) 24.10.2023 13:34:
>>>>> On 10/23/23 08:20, Nikita Travkin wrote:
>>>>>> pm8916 contains some hardware blocks for battery powered devices:
>>>>>>
>>>>>> - VM-BMS: Battery voltage monitoring block.
>>>>>> - LBC: Linear battery charger.
>>>>>>
>>>>>> Add them to the pmic dtsi so the devices that make use of those blocks
>>>>>> can enable them.
>>>>>>
>>>>>> Signed-off-by: Nikita Travkin <nikita@xxxxxxx>
>>>>>> ---
>>>>>>     arch/arm64/boot/dts/qcom/pm8916.dtsi | 48 ++++++++++++++++++++++++++++++++++++
>>>>>>     1 file changed, 48 insertions(+)
>>>>>>
>>>>>> diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi
>>>>>> index f4de86787743..4b2e8fb47d2d 100644
>>>>>> --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi
>>>>>> +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi
>>>>>> @@ -41,6 +41,35 @@ watchdog {
>>>>>>     			};
>>>>>>     		};
>>>>>>     +		pm8916_charger: charger@1000 {
>>>>>> +			compatible = "qcom,pm8916-lbc";
>>>>>> +			reg = <0x1000>, <0x1200>, <0x1300>, <0x1600>;
>>>>>> +			reg-names = "chgr", "bat_if", "usb", "misc";
>>>>>> +
>>>>>> +			interrupts = <0x0 0x10 0 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x10 6 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x13 0 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
>>>>>> +				     <0x0 0x13 4 IRQ_TYPE_EDGE_BOTH>;
>>>>>> +			interrupt-names = "vbat_det",
>>>>>> +					  "fast_chg",
>>>>>> +					  "chg_fail",
>>>>>> +					  "chg_done",
>>>>>> +					  "bat_pres",
>>>>>> +					  "temp_ok",
>>>>>> +					  "coarse_det",
>>>>>> +					  "usb_vbus",
>>>>> So, both the charger and the USBIN driver use the same irq? :/
>>>>>
>>>>
>>>> AFAIU the usbin extcon driver pretty much just tracks the state
>>>> of the IRQ to report extcon. It happens to assume the same part
>>>> of the pmic though, yes, which also means there will be no user
>>>> that would enable both charger and vbus extcon, since charger
>>>> driver provides this functionality as well.
>>> So, should USBIN be removed from PM8916 dt since it's essentially
>>> a part of the charger block?
>>>
>>
>> The "USB_IN" pad of the PM8916 seems to be connected on pretty much all
>> devices, even if they are using external chargers and the charging
>> functionality of PM8916 is completely disabled. For those devices, the
>> &pm8916_usbin device provides a convenient way to detect the USB state,
>> even without a working charger driver.
>>
>> While we could modify the PM8916 charger driver and DT node to have some
>> special mode where charging and battery monitoring is completely
>> disabled and only the USBIN extcon is provided, I'm not sure if that
>> would provide a significant advantage compared to just keeping the
>> simple &pm8916_usbin node with the existing driver.
> Hmm okay I see..
> 
> Generally it's rather "no bueno" to have two DT nodes consuming the
> same register space.. What happens when you enable BMS on a device
> with a non-PM8916 charger? Does it correctly recognize "no battery"
> etc.?
> 

The _charger and _bms are separate and communicate in a generic
manner via power-supplies and supply core (see 3/3) so giving
a different charger to _bms can work.

If an external charger is present in the device, qcom mandates
"external charger" optional line of the pmic to be tied, and
_charger is then disabled. The driver bails out in this case,
but _usbin could still be used.

> Konrad