[PATCH 1/1] PCI: Use FIELD_PREP() and remove *_SHIFT defines

From: Ilpo Järvinen
Date: Fri Oct 27 2023 - 04:38:34 EST


Instead of open-coded masking and shifting with PCI_CONF1_* bitfields,
use GENMASK() and FIELD_PREP(), and then remove the *_SHIFT defines
that are no longer needed.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---

drivers/pci/pci.h | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 39a8932dc340..31da9fde8aca 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -2,6 +2,8 @@
#ifndef DRIVERS_PCI_H
#define DRIVERS_PCI_H

+#include <linux/bitfield.h>
+#include <linux/bits.h>
#include <linux/pci.h>

/* Number of possible devfns: 0.0 to 1f.7 inclusive */
@@ -797,19 +799,15 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
* Section 3.2.2.3.2, Figure 3-2, p. 50.
*/

-#define PCI_CONF1_BUS_SHIFT 16 /* Bus number */
-#define PCI_CONF1_DEV_SHIFT 11 /* Device number */
-#define PCI_CONF1_FUNC_SHIFT 8 /* Function number */
-
-#define PCI_CONF1_BUS_MASK 0xff
-#define PCI_CONF1_DEV_MASK 0x1f
-#define PCI_CONF1_FUNC_MASK 0x7
+#define PCI_CONF1_BUS_MASK GENMASK(23, 16)
+#define PCI_CONF1_DEV_MASK GENMASK(15, 11)
+#define PCI_CONF1_FUNC_MASK GENMASK(10, 8)
#define PCI_CONF1_REG_MASK 0xfc /* Limit aligned offset to a maximum of 256B */

#define PCI_CONF1_ENABLE BIT(31)
-#define PCI_CONF1_BUS(x) (((x) & PCI_CONF1_BUS_MASK) << PCI_CONF1_BUS_SHIFT)
-#define PCI_CONF1_DEV(x) (((x) & PCI_CONF1_DEV_MASK) << PCI_CONF1_DEV_SHIFT)
-#define PCI_CONF1_FUNC(x) (((x) & PCI_CONF1_FUNC_MASK) << PCI_CONF1_FUNC_SHIFT)
+#define PCI_CONF1_BUS(x) FIELD_PREP(PCI_CONF1_BUS_MASK, (x))
+#define PCI_CONF1_DEV(x) FIELD_PREP(PCI_CONF1_DEV_MASK, (x))
+#define PCI_CONF1_FUNC(x) FIELD_PREP(PCI_CONF1_FUNC_MASK, (x))
#define PCI_CONF1_REG(x) ((x) & PCI_CONF1_REG_MASK)

#define PCI_CONF1_ADDRESS(bus, dev, func, reg) \
@@ -827,9 +825,8 @@ static inline pci_power_t mid_pci_get_power_state(struct pci_dev *pdev)
* are used for specifying additional 4 high bits of PCI Express register.
*/

-#define PCI_CONF1_EXT_REG_SHIFT 16
-#define PCI_CONF1_EXT_REG_MASK 0xf00
-#define PCI_CONF1_EXT_REG(x) (((x) & PCI_CONF1_EXT_REG_MASK) << PCI_CONF1_EXT_REG_SHIFT)
+#define PCI_CONF1_EXT_REG_MASK GENMASK(27, 24)
+#define PCI_CONF1_EXT_REG(x) FIELD_PREP(PCI_CONF1_EXT_REG_MASK, (x) >> 8)

#define PCI_CONF1_EXT_ADDRESS(bus, dev, func, reg) \
(PCI_CONF1_ADDRESS(bus, dev, func, reg) | \
--
2.30.2