[PATCH] net: stmmac: Wait a bit for the reset to take effect

[Bernd Edlinger]

otherwise the synopsys_id value may be read out wrong,
because the GMAC_VERSION register might still be in reset
state, for at least 1 us after the reset is de-asserted.

Add a wait for 10 us before continuing to be on the safe side.

Signed-off-by: Bernd Edlinger <bernd.edlinger@xxxxxxxxxx>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 5801f4d50f95..e485f4db3605 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7398,6 +7398,9 @@ int stmmac_dvr_probe(struct device *device,
 		dev_err(priv->device, "unable to bring out of ahb reset: %pe\n",
 			ERR_PTR(ret));
 
+	/* Wait a bit for the reset to take effect */
+	udelay(10);
+
 	/* Init MAC and get the capabilities */
 	ret = stmmac_hw_init(priv);
 	if (ret)
-- 
2.39.2