Re: [PATCH v4 2/2] riscv: Optimize bitops with Zbb extension

From: Charlie Jenkins
Date: Mon Oct 30 2023 - 22:02:14 EST

Next message: Su Hui: "[PATCH] clk: si5341: fix an error code problem in si5341_output_clk_set_rate"
Previous message: Sunil V L: "Re: [RFC PATCH v2 11/21] PCI: MSI: Add helper function to set system wide MSI support"
In reply to: Wang, Xiao W: "RE: [PATCH v4 2/2] riscv: Optimize bitops with Zbb extension"
Next in thread: Conor Dooley: "Re: [PATCH v4 2/2] riscv: Optimize bitops with Zbb extension"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Oct 31, 2023 at 01:53:55AM +0000, Wang, Xiao W wrote:
>
>
> > -----Original Message-----
> > From: Charlie Jenkins <charlie@xxxxxxxxxxxx>
> > Sent: Tuesday, October 31, 2023 4:37 AM
> > To: Wang, Xiao W <xiao.w.wang@xxxxxxxxx>
> > Cc: paul.walmsley@xxxxxxxxxx; palmer@xxxxxxxxxxx;
> > aou@xxxxxxxxxxxxxxxxx; ardb@xxxxxxxxxx; anup@xxxxxxxxxxxxxx; Li, Haicheng
> > <haicheng.li@xxxxxxxxx>; ajones@xxxxxxxxxxxxxxxx; Liu, Yujie
> > <yujie.liu@xxxxxxxxx>; linux-riscv@xxxxxxxxxxxxxxxxxxx; linux-
> > efi@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> > Subject: Re: [PATCH v4 2/2] riscv: Optimize bitops with Zbb extension
> >
> > On Mon, Oct 30, 2023 at 02:39:04PM +0800, Xiao Wang wrote:
> > > This patch leverages the alternative mechanism to dynamically optimize
> > > bitops (including __ffs, __fls, ffs, fls) with Zbb instructions. When
> > > Zbb ext is not supported by the runtime CPU, legacy implementation is
> > > used. If Zbb is supported, then the optimized variants will be selected
> > > via alternative patching.
> > >
> > > The legacy bitops support is taken from the generic C implementation as
> > > fallback.
> > >
> > > If the parameter is a build-time constant, we leverage compiler builtin to
> > > calculate the result directly, this approach is inspired by x86 bitops
> > > implementation.
> > >
> > > EFI stub runs before the kernel, so alternative mechanism should not be
> > > used there, this patch introduces a macro NO_ALTERNATIVE for this
> > purpose.
> > >
> > > Signed-off-by: Xiao Wang <xiao.w.wang@xxxxxxxxx>
> > > ---
> > > arch/riscv/include/asm/bitops.h | 255 +++++++++++++++++++++++++-
> > > drivers/bitopstest/Kconfig | 1 +
> > > drivers/firmware/efi/libstub/Makefile | 2 +-
> > > 3 files changed, 254 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/arch/riscv/include/asm/bitops.h
> > b/arch/riscv/include/asm/bitops.h
> > > index 3540b690944b..ef35c9ebc2ed 100644
> > > --- a/arch/riscv/include/asm/bitops.h
> > > +++ b/arch/riscv/include/asm/bitops.h
> > > @@ -15,13 +15,262 @@
> > > #include <asm/barrier.h>
> > > #include <asm/bitsperlong.h>
> > >
> > > +#if !defined(CONFIG_RISCV_ISA_ZBB) || defined(NO_ALTERNATIVE)
> > > #include <asm-generic/bitops/__ffs.h>
> > > -#include <asm-generic/bitops/ffz.h>
> > > -#include <asm-generic/bitops/fls.h>
> > > #include <asm-generic/bitops/__fls.h>
> > > +#include <asm-generic/bitops/ffs.h>
> > > +#include <asm-generic/bitops/fls.h>
> > > +
> > > +#else
> > > +#include <asm/alternative-macros.h>
> > > +#include <asm/hwcap.h>
> > > +
> > > +#if (BITS_PER_LONG == 64)
> > > +#define CTZW "ctzw "
> > > +#define CLZW "clzw "
> > > +#elif (BITS_PER_LONG == 32)
> > > +#define CTZW "ctz "
> > > +#define CLZW "clz "
> > > +#else
> > > +#error "Unexpected BITS_PER_LONG"
> > > +#endif
> > > +
> > > +static __always_inline unsigned long variable__ffs(unsigned long word)
> > > +{
> > > + int num;
> > > +
> > > + asm_volatile_goto(
> > > + ALTERNATIVE("j %l[legacy]", "nop", 0, RISCV_ISA_EXT_ZBB, 1)
> > > + : : : : legacy);
> > > +
> >
> > On this and following asm blocks, checkpatch outputs: "Lines should not
> > end with a '('".
>
> I did below check, but I got no warning.
> # ./scripts/checkpatch.pl v4-0002-riscv-Optimize-bitops-with-Zbb-extension.patch
> total: 0 errors, 0 warnings, 280 lines checked
> May I know how you do the check?
> BTW, I see arch/riscv/include/asm/jump_label.h and arch/riscv/include/asm/cpufeature.h have similar code.

I normally use the --strict flag since that is what the Patchwork server
uses.

>
> >
> > > + asm volatile (
> > > + ".option push\n"
> > > + ".option arch,+zbb\n"
> > > + "ctz %0, %1\n"
> > > + ".option pop\n"
> > > + : "=r" (word) : "r" (word) :);
> > > +
> > > + return word;
> > > +
> > > +legacy:
> > > + num = 0;
> > > +#if BITS_PER_LONG == 64
> > > + if ((word & 0xffffffff) == 0) {
> > > + num += 32;
> > > + word >>= 32;
> > > + }
> > > +#endif
> > > + if ((word & 0xffff) == 0) {
> > > + num += 16;
> > > + word >>= 16;
> > > + }
> > > + if ((word & 0xff) == 0) {
> > > + num += 8;
> > > + word >>= 8;
> > > + }
> > > + if ((word & 0xf) == 0) {
> > > + num += 4;
> > > + word >>= 4;
> > > + }
> > > + if ((word & 0x3) == 0) {
> > > + num += 2;
> > > + word >>= 2;
> > > + }
> > > + if ((word & 0x1) == 0)
> > > + num += 1;
> > > + return num;
> > > +}
> > > +
> > > +/**
> > > + * __ffs - find first set bit in a long word
> > > + * @word: The word to search
> > > + *
> > > + * Undefined if no set bit exists, so code should check against 0 first.
> > > + */
> > > +#define __ffs(word) \
> > > + (__builtin_constant_p(word) ? \
> > > + (unsigned long)__builtin_ctzl(word) : \
> > > + variable__ffs(word))
> > > +
> > > +static __always_inline unsigned long variable__fls(unsigned long word)
> > > +{
> > > + int num;
> > > +
> > > + asm_volatile_goto(
> > > + ALTERNATIVE("j %l[legacy]", "nop", 0, RISCV_ISA_EXT_ZBB, 1)
> > > + : : : : legacy);
> > > +
> > > + asm volatile (
> > > + ".option push\n"
> > > + ".option arch,+zbb\n"
> > > + "clz %0, %1\n"
> > > + ".option pop\n"
> > > + : "=r" (word) : "r" (word) :);
> > > +
> > > + return BITS_PER_LONG - 1 - word;
> > > +
> > > +legacy:
> > > + num = BITS_PER_LONG - 1;
> > > +#if BITS_PER_LONG == 64
> > > + if (!(word & (~0ul << 32))) {
> > > + num -= 32;
> > > + word <<= 32;
> > > + }
> > > +#endif
> > > + if (!(word & (~0ul << (BITS_PER_LONG-16)))) {
> > > + num -= 16;
> > > + word <<= 16;
> > > + }
> > > + if (!(word & (~0ul << (BITS_PER_LONG-8)))) {
> > > + num -= 8;
> > > + word <<= 8;
> > > + }
> > > + if (!(word & (~0ul << (BITS_PER_LONG-4)))) {
> > > + num -= 4;
> > > + word <<= 4;
> > > + }
> > > + if (!(word & (~0ul << (BITS_PER_LONG-2)))) {
> > > + num -= 2;
> > > + word <<= 2;
> > > + }
> > > + if (!(word & (~0ul << (BITS_PER_LONG-1))))
> > > + num -= 1;
> > > + return num;
> > > +}
> > > +
> > > +/**
> > > + * __fls - find last set bit in a long word
> > > + * @word: the word to search
> > > + *
> > > + * Undefined if no set bit exists, so code should check against 0 first.
> > > + */
> > > +#define __fls(word) \
> > > + (__builtin_constant_p(word) ? \
> > > + (unsigned long)(BITS_PER_LONG - 1 - __builtin_clzl(word)) : \
> > > + variable__fls(word))
> > > +
> > > +static __always_inline int variable_ffs(int x)
> > > +{
> > > + int r;
> > > +
> > > + if (!x)
> > > + return 0;
> > > +
> > > + asm_volatile_goto(
> > > + ALTERNATIVE("j %l[legacy]", "nop", 0, RISCV_ISA_EXT_ZBB, 1)
> > > + : : : : legacy);
> > > +
> > > + asm volatile (
> > > + ".option push\n"
> > > + ".option arch,+zbb\n"
> > > + CTZW "%0, %1\n"
> > > + ".option pop\n"
> > > + : "=r" (r) : "r" (x) :);
> > > +
> > > + return r + 1;
> > > +
> > > +legacy:
> > > + r = 1;
> > > + if (!(x & 0xffff)) {
> > > + x >>= 16;
> > > + r += 16;
> > > + }
> > > + if (!(x & 0xff)) {
> > > + x >>= 8;
> > > + r += 8;
> > > + }
> > > + if (!(x & 0xf)) {
> > > + x >>= 4;
> > > + r += 4;
> > > + }
> > > + if (!(x & 3)) {
> > > + x >>= 2;
> > > + r += 2;
> > > + }
> > > + if (!(x & 1)) {
> > > + x >>= 1;
> > > + r += 1;
> > > + }
> > > + return r;
> > > +}
> > > +
> > > +/**
> > > + * ffs - find first set bit in a word
> > > + * @x: the word to search
> > > + *
> > > + * This is defined the same way as the libc and compiler builtin ffs routines.
> > > + *
> > > + * ffs(value) returns 0 if value is 0 or the position of the first set bit if
> > > + * value is nonzero. The first (least significant) bit is at position 1.
> > > + */
> > > +#define ffs(x) (__builtin_constant_p(x) ? __builtin_ffs(x) : variable_ffs(x))
> > > +
> > > +static __always_inline int variable_fls(unsigned int x)
> > > +{
> > > + int r;
> > > +
> > > + if (!x)
> > > + return 0;
> > > +
> > > + asm_volatile_goto(
> > > + ALTERNATIVE("j %l[legacy]", "nop", 0, RISCV_ISA_EXT_ZBB, 1)
> > > + : : : : legacy);
> > > +
> > > + asm volatile (
> > > + ".option push\n"
> > > + ".option arch,+zbb\n"
> > > + CLZW "%0, %1\n"
> > > + ".option pop\n"
> > > + : "=r" (r) : "r" (x) :);
> > > +
> > > + return 32 - r;
> > > +
> > > +legacy:
> > > + r = 32;
> > > + if (!(x & 0xffff0000u)) {
> > > + x <<= 16;
> > > + r -= 16;
> > > + }
> > > + if (!(x & 0xff000000u)) {
> > > + x <<= 8;
> > > + r -= 8;
> > > + }
> > > + if (!(x & 0xf0000000u)) {
> > > + x <<= 4;
> > > + r -= 4;
> > > + }
> > > + if (!(x & 0xc0000000u)) {
> > > + x <<= 2;
> > > + r -= 2;
> > > + }
> > > + if (!(x & 0x80000000u)) {
> > > + x <<= 1;
> > > + r -= 1;
> > > + }
> > > + return r;
> > > +}
> > > +
> > > +/**
> > > + * fls - find last set bit in a word
> > > + * @x: the word to search
> > > + *
> > > + * This is defined in a similar way as ffs, but returns the position of the most
> > > + * significant set bit.
> > > + *
> > > + * fls(value) returns 0 if value is 0 or the position of the last set bit if
> > > + * value is nonzero. The last (most significant) bit is at position 32.
> > > + */
> > > +#define fls(x)
> > \
> > > + (__builtin_constant_p(x) ? \
> > > + (int)(((x) != 0) ? \
> > > + (sizeof(unsigned int) * 8 - __builtin_clz(x)) : 0) : \
> > > + variable_fls(x))
> > > +
> >
> > Checkpath complains: "Macro argument reuse 'x' - possible side-effects"
> >
>
> Ditto.
>
> > > +#endif /* !defined(CONFIG_RISCV_ISA_ZBB) || defined(NO_ALTERNATIVE)
> > */
> > > +
> > > +#include <asm-generic/bitops/ffz.h>
> > > #include <asm-generic/bitops/fls64.h>
> > > #include <asm-generic/bitops/sched.h>
> > > -#include <asm-generic/bitops/ffs.h>
> > >
> > > #include <asm-generic/bitops/hweight.h>
> > >
> > > diff --git a/drivers/bitopstest/Kconfig b/drivers/bitopstest/Kconfig
> > > index d0e2af4b801e..6ef6dcd41d49 100644
> > > --- a/drivers/bitopstest/Kconfig
> > > +++ b/drivers/bitopstest/Kconfig
> > > @@ -1,6 +1,7 @@
> > > # SPDX-License-Identifier: GPL-2.0-only
> > > menuconfig BITOPSTEST
> > > tristate "self test for bitops optimization"
> > > + default y
> > > help
> > > Enable this to test the bitops APIs.
> >
> > Is this a test you wanted to add? The source code isn't included.
>
> Sorry, I mistakenly did a "git add" for my local test. Will drop it.
>
> BRs,
> Xiao
>
> >
> > - Charlie

In the next version after you remove this Kconfig file you can add my
reviewed-by signature to this series.

Reviewed-by: Charlie Jenkins <charlie@xxxxxxxxxxxx>

> >
> > >
> > > diff --git a/drivers/firmware/efi/libstub/Makefile
> > b/drivers/firmware/efi/libstub/Makefile
> > > index a1157c2a7170..d68cacd4e3af 100644
> > > --- a/drivers/firmware/efi/libstub/Makefile
> > > +++ b/drivers/firmware/efi/libstub/Makefile
> > > @@ -28,7 +28,7 @@ cflags-$(CONFIG_ARM) += -
> > DEFI_HAVE_STRLEN -DEFI_HAVE_STRNLEN \
> > > -DEFI_HAVE_MEMCHR -
> > DEFI_HAVE_STRRCHR \
> > > -DEFI_HAVE_STRCMP -fno-builtin -fpic \
> > > $(call cc-option,-mno-single-pic-base)
> > > -cflags-$(CONFIG_RISCV) += -fpic
> > > +cflags-$(CONFIG_RISCV) += -fpic -DNO_ALTERNATIVE
> > > cflags-$(CONFIG_LOONGARCH) += -fpie
> > >
> > > cflags-$(CONFIG_EFI_PARAMS_FROM_FDT) += -
> > I$(srctree)/scripts/dtc/libfdt
> > > --
> > > 2.25.1
> > >

Next message: Su Hui: "[PATCH] clk: si5341: fix an error code problem in si5341_output_clk_set_rate"
Previous message: Sunil V L: "Re: [RFC PATCH v2 11/21] PCI: MSI: Add helper function to set system wide MSI support"
In reply to: Wang, Xiao W: "RE: [PATCH v4 2/2] riscv: Optimize bitops with Zbb extension"
Next in thread: Conor Dooley: "Re: [PATCH v4 2/2] riscv: Optimize bitops with Zbb extension"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]