Re: [PATCH] dt-bindings: i2c: Add yaml for Spreadtrum I2C controller

From: Krzysztof Kozlowski
Date: Tue Oct 31 2023 - 04:22:05 EST


On 31/10/2023 09:08, Huangzheng Lai wrote:
> Add yaml file to replace txt file, and added description and
> example of reset attribute for Spreadtrum I2C controller.
>
> Signed-off-by: Huangzheng Lai <Huangzheng.Lai@xxxxxxxxxx>
> ---
> .../devicetree/bindings/i2c/i2c-sprd.txt | 31 --------
> .../devicetree/bindings/i2c/i2c-sprd.yaml | 79 +++++++++++++++++++

Filename matching compatible.

> 2 files changed, 79 insertions(+), 31 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-sprd.txt
> create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sprd.yaml
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt b/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
> deleted file mode 100644
> index 7b6b3b8d0d11..000000000000
> --- a/Documentation/devicetree/bindings/i2c/i2c-sprd.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -I2C for Spreadtrum platforms
> -
> -Required properties:
> -- compatible: Should be "sprd,sc9860-i2c".
> -- reg: Specify the physical base address of the controller and length
> - of memory mapped region.
> -- interrupts: Should contain I2C interrupt.
> -- clock-names: Should contain following entries:
> - "i2c" for I2C clock,
> - "source" for I2C source (parent) clock,
> - "enable" for I2C module enable clock.
> -- clocks: Should contain a clock specifier for each entry in clock-names.
> -- clock-frequency: Contains desired I2C bus clock frequency in Hz.
> -- #address-cells: Should be 1 to describe address cells for I2C device address.
> -- #size-cells: Should be 0 means no size cell for I2C device address.
> -
> -Optional properties:
> -- Child nodes conforming to I2C bus binding
> -
> -Examples:
> -i2c0: i2c@70500000 {
> - compatible = "sprd,sc9860-i2c";
> - reg = <0 0x70500000 0 0x1000>;
> - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> - clock-names = "i2c", "source", "enable";
> - clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
> - clock-frequency = <400000>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -};
> -
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-sprd.yaml b/Documentation/devicetree/bindings/i2c/i2c-sprd.yaml
> new file mode 100644
> index 000000000000..54378afe8419
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-sprd.yaml
> @@ -0,0 +1,79 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2020 Unisoc Inc.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/i2c/i2c-sprd.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Unisoc I2C Controller Device
> +
> +maintainers:
> + - Huangzheng Lai <laihuangzheng@xxxxxxxxx>
> +

Missing ref to i2c-controller. Open existing bindings and use them as
template instead of making something on your own with known bugs.

> +properties:
> + compatible:
> + items:

You can drop the items.

> + - const: sprd,sc9860-i2c
> +
> + reg:
> + maxItems: 2

You need to describe the items (items with description)

> +
> + interrupts:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: i2c
> + - const: source
> + - const: enable
> +
> + clocks:
> + items:
> + - description: Clock specifier for "i2c" in clock-names

This description is useless and redundant. Instead, say what clock is
it. If you do not know, then just maxItems: 3

> + - description: Clock specifier for "source" in clock-names
> + - description: Clock specifier for "enable" in clock-names
> +
> + clock-frequency:
> + description: Constains desired I2C bus clock frequency in Hz

Typo, Contains

> +
> + "#address-cells":
> + const: 1
> + description: Address cells for I2C device address

Drop, why do you need it?

> +
> + "#size-cells":
> + const: 0
> + description: Size cell for I2C device address

Drop

> +
> + reset-names:
> + const: i2c_rst

Drop, wasn't in original binding. Or explain in commit msg what you
changed and why.

> +
> + resets:
> + maxItems: 1
> + description: Phandle to the reset controller.

Drop, wasn't in original binding. Or explain in commit msg what you
changed and why.

Description is also quite redundant/useless.


> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clock-names
> + - clocks
> + - "#address-cells"
> + - "#size-cells"

Really... Open existing bindings.

> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c0: i2c@2240000 {
> + compatible = "sprd,sc9860-i2c";
> + reg = <0 0x2240000 0 0x1000>;
> + interrupts = <11>;
> + clock-names = "i2c", "source", "enable";
> + clocks = <&clk_i2c3>, <&ext_26m>, <&clk_ap_apb_gates 11>;
> + clock-frequency = <400000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reset-names = "i2c_rst";
> + resets = <&apahb_gate 3>;

Incomplete. Add child node.

> + };
> +

Best regards,
Krzysztof