Re: [PATCH net-next v2 4/9] dt-bindings: net: add OPEN Alliance 10BASE-T1x MAC-PHY Serial Interface

From: Parthiban.Veerasooran
Date: Tue Oct 31 2023 - 09:00:36 EST


Hi Krzysztof

As per the comments in the other email of this patch, this DT bindings
are going to be removed.

Best Regards,
Parthiban V

On 24/10/23 1:14 pm, Krzysztof Kozlowski wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 23/10/2023 17:46, Parthiban Veerasooran wrote:
>> Add DT bindings OPEN Alliance 10BASE-T1x MACPHY Serial Interface
>> parameters. These are generic properties that can apply to any 10BASE-T1x
>> MAC-PHY which uses OPEN Alliance TC6 specification.
>
> Except that it was not tested at all few more issues.
>
>>
>> Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@xxxxxxxxxxxxx>
>> ---
>> .../devicetree/bindings/net/oa-tc6.yaml | 72 +++++++++++++++++++
>> MAINTAINERS | 1 +
>> 2 files changed, 73 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/net/oa-tc6.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/net/oa-tc6.yaml b/Documentation/devicetree/bindings/net/oa-tc6.yaml
>> new file mode 100644
>> index 000000000000..9f442fa6cace
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/oa-tc6.yaml
>
> Filename based on compatible.
>
>> @@ -0,0 +1,72 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/net/oa-tc6.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: OPEN Alliance 10BASE-T1x MAC-PHY Specification Common Properties
>> +
>> +maintainers:
>> + - Parthiban Veerasooran <parthiban.veerasooran@xxxxxxxxxxxxx>
>> +
>> +description:
>> + These are generic properties that can apply to any 10BASE-T1x MAC-PHY
>> + which uses OPEN Alliance TC6 specification.
>> +
>> + 10BASE-T1x MAC-PHY Serial Interface Specification can be found at:
>> + https://opensig.org/about/specifications/
>> +
>> +properties:
>> + $nodename:
>> + pattern: "^oa-tc6(@.*)?"
>
> Drop
>
>> +
>> + "#address-cells":
>> + const: 1
>> +
>> + "#size-cells":
>> + const: 0
>
> Why?
>
>> +
>> + oa-cps:
>> + maxItems: 1
>> + description:
>> + Chunk Payload Size. Configures the data chunk payload size to 2^N,
>> + where N is the value of this bitfield. The minimum possible data
>> + chunk payload size is 8 bytes or N = 3. The default data chunk
>> + payload size is 64 bytes, or N = 6. The minimum supported data chunk
>> + payload size for this MAC-PHY device is indicated in the CPSMIN
>> + field of the CAPABILITY register. Valid values for this parameter
>> + are 8, 16, 32 and 64. All other values are reserved.
>> +
>> + oa-txcte:
>> + maxItems: 1
>> + description:
>> + Transmit Cut-Through Enable. When supported by this MAC-PHY device,
>> + this bit enables the cut-through mode of frame transfer through the
>> + MAC-PHY device from the SPI host to the network.
>> +
>> + oa-rxcte:
>> + maxItems: 1
>> + description:
>> + Receive Cut-Through Enable. When supported by this MAC-PHY device,
>> + this bit enables the cut-through mode of frame transfer through the
>> + MAC-PHY device from the network to the SPI host.
>> +
>> + oa-prote:
>> + maxItems: 1
>> + description:
>> + Control data read/write Protection Enable. When set, all control
>> + data written to and read from the MAC-PHY will be transferred with
>> + its complement for detection of bit errors.
>> +
>> +additionalProperties: true
>> +
>> +examples:
>> + - |
>> + oa-tc6 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
> That's some total mess in indentation.
>
>> + oa-cps = <64>;
>> + oa-txcte;
>> + oa-rxcte;
>> + oa-prote;
>> + };
> Best regards,
> Krzysztof
>