Re: [PATCH 6/6] tty: serial: amba-pl011: Parse bits option as 5, 6, 7 or 8 in _get_options

[Hugo Villeneuve]

On Tue, 31 Oct 2023 10:35:29 +0100
Théo Lebrun <theo.lebrun@xxxxxxxxxxx> wrote:

> Hello,
> 
> On Thu Oct 26, 2023 at 4:53 PM CEST, Hugo Villeneuve wrote:
> > On Thu, 26 Oct 2023 12:41:23 +0200
> > Théo Lebrun <theo.lebrun@xxxxxxxxxxx> wrote:
> >
> > Hi,
> > I would change the commit title to better indicate that you add support
> > for bits 5 and 6, which was missing.
> >
> > Maybe "Add support for 5 and 6 bits in..." ?
> >
> > > pl011_console_get_options() gets called to retrieve currently configured
> > > options from the registers. Previously, LCRH_TX.WLEN was being parsed
> >
> > It took me some time to understand your explanation :) Maybe change
> > to:
> >
> > "Previously, only 7 or 8 bits were supported."
> >
> > > as either 7 or 8 (fallback). Hardware supports values from 5 to 8
> >
> > Add bits:
> >
> > "5 to 8 bits..."
> >
> > And indicate that this patch adds support for 5 and 6 bits.
> 
> I agree the whole commit message is unclear. Let's rewrite it. What do
> you think of the following:
> 
>    tty: serial: amba-pl011: Allow parsing word length of 5/6 bits at console setup
> 
>    If no options are given at console setup, we parse hardware register
>    LCRH_TX.WLEN for bits per word. We compare the value to the 7 bits
>    value (UART01x_LCRH_WLEN_7). If the hardware is configured for 5, 6
>    or 8 bits per word, we fallback to 8 bits.
> 
>    Change that behavior to parse the whole range available: from 5 to 8
>    bits per word.
> 
> Note that we don't add support for 5/6 bits, we only update the parsing
> of the regs (if no options are passed at setup) to reflect the current
> hardware config. The behavior will be different only if the inherited
> value (from reset/bootloader) is 5 or 6: previously we guessed 8 bits
> word length, now we guess the right value.
> 
> What's your opinion on this new commit message?

Hi,
that's fine with me.

Hugo.