Re: [PATCH v2 1/6] dt-bindings: mfd: brcm,bcm59056: Convert to YAML

[Krzysztof Kozlowski]

On 30/10/2023 20:41, Artur Weber wrote:
> Convert devicetree bindings for the Broadcom BCM59056 PMU MFD from
> TXT to YAML format. This patch does not change any functionality;
> the bindings remain the same.
> 
> Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
> ---
>  .../devicetree/bindings/mfd/brcm,bcm59056.txt      | 39 ----------
>  .../devicetree/bindings/mfd/brcm,bcm59056.yaml     | 91 ++++++++++++++++++++++
>  2 files changed, 91 insertions(+), 39 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
> deleted file mode 100644
> index be51a15e05f9..000000000000
> --- a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.txt
> +++ /dev/null
> @@ -1,39 +0,0 @@
> --------------------------------
> -BCM590xx Power Management Units
> --------------------------------
> -
> -Required properties:
> -- compatible: "brcm,bcm59056"
> -- reg: I2C slave address
> -- interrupts: interrupt for the PMU. Generic interrupt client node bindings
> -  are described in interrupt-controller/interrupts.txt
> -
> -------------------
> -Voltage Regulators
> -------------------
> -
> -Optional child nodes:
> -- regulators: container node for regulators following the generic
> -  regulator binding in regulator/regulator.txt
> -
> -  The valid regulator node names for BCM59056 are:
> -  	rfldo, camldo1, camldo2, simldo1, simldo2, sdldo, sdxldo,
> -	mmcldo1, mmcldo2, audldo, micldo, usbldo, vibldo,
> -	csr, iosr1, iosr2, msr, sdsr1, sdsr2, vsr,
> -	gpldo1, gpldo2, gpldo3, gpldo4, gpldo5, gpldo6,
> -	vbus
> -
> -Example:
> -	pmu: bcm59056@8 {
> -		compatible = "brcm,bcm59056";
> -		reg = <0x08>;
> -		interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
> -		regulators {
> -			rfldo_reg: rfldo {
> -				regulator-min-microvolt = <1200000>;
> -				regulator-max-microvolt = <3300000>;
> -			};
> -
> -			...
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
> new file mode 100644
> index 000000000000..6d6acc9fd312
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm59056.yaml
> @@ -0,0 +1,91 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/brcm,bcm59056.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: BCM590xx Power Management Unit MFD
> +
> +maintainers:
> +  - Artur Weber <aweber.kernel@xxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - "brcm,bcm59056"

This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof