Re: [PATCH net v2] net: dsa: tag_rtl4_a: Bump min packet size

[Linus Walleij]

On Tue, Oct 31, 2023 at 5:34 PM Vladimir Oltean <olteanv@xxxxxxxxx> wrote:

> Ok, so we don't have a confirmation of breakage with other conduit
> interface than the Gemini driver, either. So a problem there is still
> not off the table.

True!

> So on the gemini-dlink-dir-685.dts platform, you can also use &gmac1 as
> a plain Ethernet port, right?

As a port it exist on the SoC yes but it is not connected physically
to anything.

&gmac0 is connected to the switch, and the switch has all the PHYs.

(I don't know if I misunderstand the question...)

> If possible, could you set up dsa_loop (enable CONFIG_NET_DSA_LOOP, replace
> "eth0" in dsa_loop_pdata with the netdev name of &gmac1, replace DSA_TAG_PROTO_NONE
> in dsa_loop_get_protocol() with your tagging protocol) and put a tcpdump
> on the remote end of the gmac1 port, to see if the issue isn't, in fact,
> somewhere else, maybe gmac_start_xmit()?

If you by remote end mean the end of a physical cable there is
no way I can do that, as I have no PHY on gmac1.

But I have other Gemini platforms, so I will try to do it on one
of them! Let's see if I can do this thing....

Yours,
Linus Walleij