[PATCH net-next v11 09/13] net:ethernet:realtek:rtase: Implement pci_driver suspend and resume function

[Justin Lai]

Implement the pci_driver suspend function to enable the device
to sleep, and implement the resume function to enable the device
to resume operation.

Signed-off-by: Justin Lai <justinlai0215@xxxxxxxxxxx>
---
 .../net/ethernet/realtek/rtase/rtase_main.c   | 64 +++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/net/ethernet/realtek/rtase/rtase_main.c b/drivers/net/ethernet/realtek/rtase/rtase_main.c
index 12607663dd72..b7679b74cc8a 100644
--- a/drivers/net/ethernet/realtek/rtase/rtase_main.c
+++ b/drivers/net/ethernet/realtek/rtase/rtase_main.c
@@ -2323,12 +2323,76 @@ static void rtase_shutdown(struct pci_dev *pdev)
 	rtase_reset_interrupt(pdev, tp);
 }
 
+#ifdef CONFIG_PM
+static int rtase_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (!netif_running(dev))
+		goto out;
+
+	netif_stop_queue(dev);
+	netif_carrier_off(dev);
+	netif_device_detach(dev);
+	rtase_hw_reset(dev);
+
+out:
+	pci_save_state(pdev);
+
+	return 0;
+}
+
+static int rtase_resume(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct rtase_private *tp = netdev_priv(dev);
+	int ret;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_enable_wake(pdev, PCI_D0, 0);
+
+	/* restore last modified mac address */
+	rtase_rar_set(tp, dev->dev_addr);
+
+	if (!netif_running(dev))
+		goto out;
+
+	rtase_wait_for_quiescence(dev);
+
+	rtase_tx_clear(tp);
+	rtase_rx_clear(tp);
+
+	ret = rtase_init_ring(dev);
+	if (ret) {
+		netdev_err(dev, "unable to init ring\n");
+		rtase_free_desc(tp);
+		return -ENOMEM;
+	}
+
+	rtase_hw_config(dev);
+	/* always link, so start to transmit & receive */
+	rtase_hw_start(dev);
+
+	netif_carrier_on(dev);
+	netif_wake_queue(dev);
+	netif_device_attach(dev);
+
+out:
+	return 0;
+}
+#endif /* CONFIG_PM */
+
 static struct pci_driver rtase_pci_driver = {
 	.name = KBUILD_MODNAME,
 	.id_table = rtase_pci_tbl,
 	.probe = rtase_init_one,
 	.remove = rtase_remove_one,
 	.shutdown = rtase_shutdown,
+#ifdef CONFIG_PM
+	.suspend = rtase_suspend,
+	.resume = rtase_resume,
+#endif
 };
 
 module_pci_driver(rtase_pci_driver);
-- 
2.34.1