Re: [PATCH] cpuidle: idle exit_latency overflow
From: Bo Ye (叶波)
Date: Thu Nov 16 2023 - 09:52:30 EST
On Thu, 2023-11-16 at 15:20 +0100, AngeloGioacchino Del Regno wrote:
> Il 16/11/23 14:26, Bo Ye ha scritto:
> > From: C Cheng <C.Cheng@xxxxxxxxxxxx>
> >
> > In detail:
> > In kernel-6.1, in the __cpuidle_driver_init function in
> > driver/cpuidle/driver.c, there is a line of code that causes
> > an overflow. The line is s->exit_latency_ns = s->exit_latency
> > * NSEC_PER_USEC. The overflow occurs because the product of an
> > int type and a constant exceeds the range of the int type.
> >
> > In C language, when you perform a multiplication operation, if
> > both operands are of int type, the multiplication operation is
> > performed on the int type, and then the result is converted to
> > the target type. This means that if the product of int type
> > multiplication exceeds the range that int type can represent,
> > an overflow will occur even if you store the result in a
> > variable of int64_t type.
> >
> > Signed-off-by: C Cheng <C.Cheng@xxxxxxxxxxxx>
>
> It all makes sense, but "mtk24676" is not the name of a person,
> what's going on?
Corrected, apologies for any inconvenience caused.
>
> > Signed-off-by: Bo Ye <bo.ye@xxxxxxxxxxxx>
>
> That's the same, you perhaps wanted to write "Bo Ye", not "bo.ye".
Corrected, apologies for any inconvenience caused. I would greatly
appreciate it if you could recommend a formatting checking tool.
If there is no auto checking tool, I will pay attention to these
formatting checks next time.
Best Regards,
Bosser
>
> Regards,
> Angelo
>
> > ---
> >
> > diff --git a/drivers/cpuidle/driver.c b/drivers/cpuidle/driver.c
> > index d9cda7f..631ca16 100644
> > --- a/drivers/cpuidle/driver.c
> > +++ b/drivers/cpuidle/driver.c
> > @@ -187,7 +187,7 @@
> > s->target_residency = div_u64(s-
> > >target_residency_ns, NSEC_PER_USEC);
> >
> > if (s->exit_latency > 0)
> > - s->exit_latency_ns = s->exit_latency *
> > NSEC_PER_USEC;
> > + s->exit_latency_ns = (u64)s->exit_latency *
> > NSEC_PER_USEC;
> > else if (s->exit_latency_ns < 0)
> > s->exit_latency_ns = 0;
> > else
>
>