Re: [PATCH 3/9] net: mdio: ipq4019: Enable GPIO reset for ipq5332 platform

[Jie Luo]

On 11/17/2023 1:20 AM, Andrew Lunn wrote:
> > FYI, here is the sequence to bring up qca8084.
> > a. enable clock output to qca8084.
> > b. do gpio reset of qca8084.
> > c. customize MDIO address and initialization configurations.
> > d. the PHY ID can be acquired.
>
> This all sounds like it is specific to the qca8084, so it should be in
> the driver for the qca8084.
>
> Its been pointed out you can get the driver to load by using the PHY
> ID in the compatible. You want the SoC clock driver to export a CCF
> clock, which the PHY driver can use. The PHY driver should also be
> able to get the GPIO. So i think the PHY driver can do all this.
>
>       Andrew

Yes, Andrew, that is feasible, i will update the patches to move the
initialized clock configs in the PHY probe function.