[PATCH 1/2] arm64: dts: ti: k3-am65: Enable SDHCI nodes at the board level

[Andrew Davis]

SDHCI nodes defined in the top-level AM65 SoC dtsi files are incomplete
and will not be functional unless they are extended.

As the attached SD/eMMC is only known about at the board integration level,
these nodes should only be enabled when provided with this information.

Disable the SDHCI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@xxxxxx>
---
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi           | 1 +
 arch/arm64/boot/dts/ti/k3-am65-main.dtsi                     | 2 ++
 arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi   | 5 -----
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts               | 2 ++
 .../arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi | 1 +
 5 files changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index ba1c14a54acf4..79dbb286bafc1 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -554,6 +554,7 @@ &ecap0 {
 };
 
 &sdhci1 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 5ebb87f467de5..9ff3094743f21 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -449,6 +449,7 @@ sdhci0: mmc@4f80000 {
 		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	sdhci1: mmc@4fa0000 {
@@ -471,6 +472,7 @@ sdhci1: mmc@4fa0000 {
 		ti,clkbuf-sel = <0x7>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
+		status = "disabled";
 	};
 
 	scm_conf: scm-conf@100000 {
diff --git a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
index 5ab434c02ab6b..e4d7cba7c62f0 100644
--- a/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi
@@ -29,11 +29,6 @@ cpu-map {
 	/delete-node/ l2-cache1;
 };
 
-/* eMMC */
-&sdhci0 {
-	status = "disabled";
-};
-
 &main_pmx0 {
 	main_uart0_pins_default: main-uart0-default-pins {
 		pinctrl-single,pins = <
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1637ec5ab5eda..822c288d27976 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -449,6 +449,7 @@ flash@0 {
 };
 
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
@@ -463,6 +464,7 @@ &sdhci0 {
  * disable sdhci1
  */
 &sdhci1 {
+	status = "okay";
 	vmmc-supply = <&vdd_mmc1_sd>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
index be55494b1f3fc..a847209c3df52 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi
@@ -43,6 +43,7 @@ AM65X_IOPAD(0x01b0, PIN_INPUT,          0)  /* (C25) MMC0_DS */
 
 /* eMMC */
 &sdhci0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc0_pins_default>;
 	bus-width = <8>;
-- 
2.39.2